Swiss Link Stainless Steel Water Can

The Swiss Link Stainless Steel Water Can is a jerry-can-profile potable water container built from 0.8 mm, 304-grade FDA-compliant stainless steel: welded, polished inside, and sized in 10-liter (2.6 gal) and 20-liter (5.3 gal) options. A three-handle top supports one-person or two-person carry, and an embossed WATER panel keeps it visually distinct from fuel cans in a mixed rack.

Welded Steel, Not Crimped or Lined

The Swiss Link Water Can's 0.8 mm body is fully welded rather than crimped, which eliminates the seam failures that can develop in lighter-gauge or mechanically joined containers over years of field use. The interior is polished stainless with no paint, no liner, and no sealant, so there is nothing to chip, peel, or leach into stored water. X-ribbed side panels add rigidity without adding weight, keeping the body from flexing under a full load.

A Seal System Built for Potable Water

The 1.75-inch knurled screw cap closes against a food-grade NBR rubber O-ring, and a separate gasketed vent screw lets air enter as water exits, maintaining a steady pour rather than the glug-and-stop flow common in unvented containers. Both gaskets use food-grade NBR rubber, which is compatible with long-term water contact. Checking and replacing these gaskets on a regular schedule is the primary maintenance task the can requires.

Ready to Pour, Ready to Fit Existing Holders

A 14-inch flexible nozzle is included and threads onto the cap opening, directing water into a pot, kettle, or bottle without a funnel. The can's footprint matches the standard jerry-can profile and is confirmed compatible with Wavian brand holders, so it drops into racks already sized for NATO-pattern fuel cans without adapters.

Features

• 304-grade FDA-compliant stainless steel, 0.8 mm: welded body, polished and unlined interior
• X-ribbed side panels: structural reinforcement across both sizes
• Knurled 1.75 in screw cap: seals against a food-grade NBR rubber O-ring
• Integrated vent screw: gasketed, admits air during pour for steady flow
• 14 in flexible nozzle included: free-flowing, directs water into cookware or bottles
• Embossed WATER panel: distinguishes the can from fuel containers at a glance

Specifications

Who This Is For and Isn't

The Swiss Link Stainless Steel Water Can suits overlanders, campers, and emergency-preparedness setups that need a durable, unlined potable-water container in a standard jerry-can form factor, particularly buyers who already run Wavian or NATO-pattern holders and want a matched water can for the same rack.

This can is rated for potable water only and must not be used for petroleum fuel or any non-water liquid; water and fuel containers must be kept separate. It does not include a holder or mounting hardware.

Common Questions

Can this can be used for gasoline, diesel, or other fuels?

No. The Swiss Link Stainless Steel Water Can is rated for potable water only. It is not for petroleum fuel, and water and fuel containers must be kept separate. For fuel storage, Swiss Link and Wavian offer dedicated red (gasoline), yellow (diesel), and blue (kerosene) steel jerry cans.

Does the interior have any coating, liner, or paint?

The interior of the Swiss Link Stainless Steel Water Can is polished 304-grade stainless steel with no paint, liner, or sealant applied. There is nothing to chip or leach into stored water, but proper cleaning before first use and regular maintenance of the cap and vent gaskets remain the owner's responsibility.

What cleaning is required before the first fill?

Cleaning instructions are printed on the can and should be followed before the first fill. Washing with warm, soapy water and allowing thorough air drying before storing potable water is recommended. Avoid harsh chemicals that could damage the NBR rubber gaskets.

Will this fit existing jerry-can holders and racks?

The Swiss Link Stainless Steel Water Can uses a standard jerry-can profile and is confirmed compatible with Wavian brand holders. Buyers using other NATO-pattern or standard jerry-can holders should verify their holder's internal dimensions against the can's 13 x 6.5 in footprint (both sizes share the same width and depth).

How do the 10-liter and 20-liter sizes differ beyond capacity?

Both sizes of the Swiss Link Stainless Steel Water Can share the same 13 x 6.5 in width and depth footprint, the same 0.8 mm 304-grade stainless construction, and the same cap, vent, and nozzle hardware. The 20-liter stands 18.25 inches tall and weighs 7 lb empty; the 10-liter stands 11 inches tall and weighs 5 lb empty.