Sea to Summit Telos Bigfoot Footprint
Sea to Summit Telos Bigfoot Footprint
Couldn't load pickup availability
The Sea to Summit Telos Bigfoot Footprint is a waterproof groundsheet that protects both the tub floor and the vestibule of Telos tents from abrasion, moisture, and dirt. Made from 68-denier 100% polyester with a 1200mm hydrostatic head rating, the Bigfoot Footprint is available in two sizes: TR2, sized for the two-person Telos, and TR3, sized for the three-person Telos.
Full-Coverage Protection Where It Counts
The Bigfoot Footprint extends beyond the tent floor to cover the vestibule as well, shielding the area where gear is stored from ground moisture and abrasion. On wet or rocky terrain, a vestibule that sits directly on bare ground can allow water to wick in or sharp edges to wear through the fabric over time. The Bigfoot Footprint intercepts that contact, keeping the tent floor and vestibule fabric in better condition across seasons of use.
Dry Set-Up and Take-Down
The Bigfoot Footprint is sized and shaped to support Dry Set-up and Take-Down, a method that lets you pack the footprint, tent body, and fly together so the wet outer fly can be separated and dried without unpacking the whole system. The footprint also supports a Fly Only configuration, where the fly and footprint are pitched without the tent body for a lighter, faster shelter option on clear nights or ultralight trips.
Durable Construction, Secure Attachment
The 68-denier polyester fabric is abrasion-resistant and carries a 1200mm waterhead rating, meaning it resists ground moisture under typical camping conditions. The perimeter attachment points are made from Hypalon and are circular-bartacked for strength and flexibility, securing the footprint to the tent without shifting during setup or in wind. The footprint is sized to avoid water pooling at the edges, which reduces the risk of water channeling under the tent floor during rain. A lightweight storage pouch is included.
Features
- 68D waterproof fabric: 100% polyester with a 1200mm hydrostatic head rating resists ground moisture and abrasion
- Vestibule coverage: extends beyond the tent floor to protect gear stored in the vestibule
- Hypalon attachment points: circular-bartacked perimeter points are flexible, strong, and secure
- Dry Set-up compatible: sized and shaped for Dry Set-up/Take-Down and Fly Only configurations
- Edge sizing: shaped to avoid water pooling and dirt collection at the perimeter
- Includes storage pouch: lightweight pouch included for packed storage and transport
Specifications
| Specification | TR2 | TR3 |
|---|---|---|
| Material | 100% Polyester, 68 denier | |
| Hydrostatic Head | 1200mm | |
| Dimensions | 222 × 266 cm (87 × 105 in) | 235 × 349 cm (93 × 137 in) |
| Weight | 382g (13.5 oz) | 511g (18.0 oz) |
| Packed Size | 20 × 16 × 4 cm (8 × 6 × 2 in) | 20 × 16 × 4 cm (8 × 6 × 2 in) |
| Attachment Points | Hypalon, circular-bartacked perimeter | |
| Included | Lightweight storage pouch | |
| Compatible Tents | Telos TR2 (all models) | Telos TR3 (all models) |
Who This Is For and Isn't
The Telos Bigfoot Footprint suits Telos tent owners who camp on rough, rocky, or wet ground and want protection for both the tent floor and the vestibule. It is also a good fit for anyone using the Telos in Fly Only or Dry Set-up configurations.
The Bigfoot Footprint is designed specifically for Telos tents and is not a universal footprint for other tent models. Campers who want floor-only coverage without vestibule protection should look at the Telos Lightfoot Footprint instead. The TR2 and TR3 sizes are not interchangeable.
Common Questions
Which Telos tents does the Bigfoot Footprint fit?
The Sea to Summit Telos Bigfoot Footprint fits all Telos tent models. The TR2 size is for the two-person Telos and the TR3 size is for the three-person Telos; the two sizes are not interchangeable.
What is the difference between the Bigfoot and Lightfoot footprints?
The Telos Bigfoot Footprint covers both the tent floor and the vestibule, providing protection for gear stored outside the inner tent. The Lightfoot Footprint covers the tent floor only and matches the floor dimensions exactly.
How waterproof is the Bigfoot Footprint?
The Telos Bigfoot Footprint is made from 68-denier polyester with a 1200mm hydrostatic head rating, which resists ground moisture under typical camping and overlanding conditions.
Does the Bigfoot Footprint work for Fly Only set-up?
Yes. The Telos Bigfoot Footprint is sized and shaped to support a Fly Only configuration, where the fly and footprint are pitched without the tent body, as well as Dry Set-up and Take-Down to keep wet fly fabric separated from the packed tent.
What is included with the Bigfoot Footprint?
The Sea to Summit Telos Bigfoot Footprint comes with a lightweight storage pouch. No additional hardware or stakes are included.
Share
