Rago Fabrication Subaru Forester Exterior MOLLE Panels

The Rago Fabrication Exterior MOLLE Storage Panels are bolt-on, powder-coated panels for the 2019–2024 Subaru Forester (excluding Wilderness trim) that mount along the external rear side windows to add accessible gear-mounting surface without consuming interior cargo space. The top edge attaches to the OEM roof rails (no rail removal required), while the bottom is secured by a RAM Mounts heavy-duty suction cup against the rear side glass. Available as a driver-side panel, passenger-side panel, or as a pair.

External Storage Without Giving Up Cargo Room

By positioning along the exterior rear side windows, the Rago Fabrication MOLLE panels use space that would otherwise go unused. Gear, tools, and trail essentials mount outside the cabin, leaving the Forester's interior cargo area free for passengers, luggage, or other equipment. That separation also keeps muddy or wet recovery gear away from the interior on the return leg of a trip.

Standard MOLLE Pattern With RotopaX Provisions Built In

Each panel features Rago Fabrication's standard MOLLE pattern, which accepts the broad ecosystem of MOLLE-compatible pouches, holsters, and tool mounts without adapters. Integrated mounting provisions are already built into the panel for adding RotopaX fuel or water containers, with no secondary bracket fabrication needed. For further expansion, the panels are designed to work alongside the Rago Fabrication Overland Crossbars for Factory Roof Rails (Part# AC8509501NA) and Rago Fabrication Quick Fist mounts (Part# R0000MSPQUICK).

Mounts to Factory Rails, No Rail Removal Required

Installation attaches the top of each panel directly to the Forester's OEM roof rails, so the factory hardware stays in place throughout the process. The lower attachment uses a RAM Mounts heavy-duty suction cup against the rear side window. The install does require drilling and riv-nut installation into the roof rail: this is a permanent, structural mount, not a clamp-on solution. A durable powder-coat finish protects the panel surface for long-term exterior use.

Features

• External rear side window placement: maximizes unused space along the Forester's exterior without reducing interior cargo volume
• Standard MOLLE pattern: compatible with a wide range of MOLLE pouches, tool mounts, and accessories
• Integrated RotopaX provisions: built-in mounting points for RotopaX fuel and water containers
• Factory roof rail mount: attaches to OEM roof rails at the top; no rail removal required during installation
• RAM Mounts heavy-duty suction cup: secures the lower edge of each panel to the rear side glass
• Powder-coat finish: durable exterior-grade coating for long-term use

Specifications

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

These panels suit 2019–2024 Subaru Forester owners who want to add exterior gear-mounting capacity using the factory roof rails, particularly overlanders and trail drivers who need accessible tool or supply storage without giving up interior cargo space.

These panels do not fit the Subaru Forester Wilderness trim. Installation requires permanent drilling into the factory roof rails and riv-nut installation, so these are not a no-drill or reversible solution. The panels are not compatible with aftermarket roof rails that differ from the OEM configuration.

Common Questions

Do I have to remove the factory roof rails to install these panels?

The Rago Fabrication Exterior MOLLE Panels are designed to mount directly to the OEM roof rails without requiring their removal. Installation does require drilling into the factory roof rails and riv-nut installation to create a permanent, structural attachment point at the top of each panel.

Will these fit the Subaru Forester Wilderness trim?

No. The Rago Fabrication Exterior MOLLE Panels for the Forester are not compatible with the Wilderness trim. They are designed for all other 2019–2024 Subaru Forester trims that retain the standard OEM roof rail configuration.

What holds the bottom of each panel to the vehicle?

The lower edge of each Rago Fabrication MOLLE panel is secured to the rear side glass by a RAM Mounts heavy-duty suction cup. The top edge is permanently mounted to the OEM roof rails via drilling and riv-nut installation, so the suction cup works in combination with that fixed upper attachment rather than as the sole retention method.

Can I mount RotopaX fuel or water containers directly to these panels?

Yes. Each Rago Fabrication Exterior MOLLE Panel includes integrated mounting provisions specifically for RotopaX accessories, so no secondary bracket is required. RotopaX containers are sold separately.

Are these sold as a pair, or do I need to buy each side separately?

The Rago Fabrication Forester Exterior MOLLE Panels are available three ways: as a driver-side panel only (SKU AC8509301NA), a passenger-side panel only (SKU AC8509401NA), or as a pair (SKU AC8509201NA). Select the option that matches your build at checkout.