Rago Fabrication 6th Gen Toyota 4Runner Exterior MOLLE Storage Panels

Rago Fabrication's Exterior MOLLE Storage Panels mount to the factory roof rails of the 2025+ Toyota 4Runner (6th Gen), turning the rear exterior into a functional gear-mounting surface for overlanding and trail use. Steel construction and a dual-stage hammer black powder coat finish keep the panels durable and visually consistent with the 4Runner's exterior. The panels are available as a pair or as individual driver-side and passenger-side units.

Organized Gear Within Reach

The full MOLLE grid accepts bolts, straps, zip ties, Quick Fists, and other MOLLE-compatible attachment systems, so shovels, axes, recovery straps, and soft gear can be secured flat against the vehicle rather than buried in the bed or cargo area. Keeping tools on the exterior means faster access when conditions change on the trail, with no unpacking required. Carriage bolt slots built into the panel face add a second mounting method for long-handled tools that don't pair naturally with MOLLE loops.

Rotopax-Ready Mounting Points

Integrated mounting points sized for Rotopax mounts let the panels carry fuel or water containers directly on the exterior, freeing interior cargo space for gear that needs to stay dry or temperature-stable. Reserve fuel or water secured on the exterior reduces the planning overhead for remote routes where resupply isn't guaranteed. Rotopax mounts are sold separately.

Roof-Rail and Crossbar Compatibility

The tops of the panels attach to the 4Runner's factory roof rails, so no additional structure is required to get started. For builds that already include Rago's Overland Crossbars, the panels attach to those instead, integrating the storage surface into a larger roof-mounted system. The bottoms of the panels secure to the rear windows using the two included RAM Mount suction cups per panel, anchoring the lower edge without permanent modification to the glass or body.

Features

• Full MOLLE Grid: compatible with bolts, straps, zip ties, Quick Fists, and MOLLE-compatible attachment systems
• Integrated Rotopax Mount Points: dedicated mounting locations for Rotopax fuel and water containers (Rotopax mounts sold separately)
• Carriage Bolt Slots: built-in slots for securing long-handled tools such as shovels and axes
• Dual-Stage Hammer Black Powder Coat: durable finish over steel construction
• Included RAM Mount Suction Cups: two heavy-duty suction cups per panel secure the lower edge to the rear window
• Three Purchase Configurations: available as a pair, driver side only, or passenger side only

Specifications

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

These panels suit 2025+ Toyota 4Runner (6th Gen) owners who want exterior MOLLE-based gear storage, particularly overlanders and trail drivers who need fast access to tools, recovery equipment, or reserve fuel and water containers without consuming interior cargo space. Buyers comfortable with a drill-and-riv-nut installation, or willing to have it done professionally, will get the most from this setup.

These panels do not fit 4Runner models equipped with an ARB Roof Rack. They are not a bolt-on, tool-free installation: drilling and riv-nuts are required. Rotopax mounts and Rago Overland Crossbars are not included and must be purchased separately if needed.

Common Questions

What does installation require?

Installing the Rago Fabrication Exterior MOLLE Storage Panels requires drilling and riv-nuts. The tops of the panels attach to the factory roof rails or Rago Overland Crossbars, and the bottoms secure to the rear windows using the two included RAM Mount suction cups per panel. This is not a tool-free installation.

Will these panels fit a 4Runner that has an ARB Roof Rack installed?

No. The Rago Fabrication Exterior MOLLE Storage Panels are not compatible with ARB Roof Racks. They are designed to mount to the 2025+ Toyota 4Runner's factory roof rails or Rago's own Overland Crossbars only.

Do I need Rago's Overland Crossbars to install these panels?

Rago's Overland Crossbars are not required. The tops of the Exterior MOLLE Storage Panels mount directly to the 4Runner's factory roof rails. The Rago Overland Crossbars are a compatible option for builds that include them, but they are sold separately.

Can I mount a Rotopax fuel or water container to these panels?

Yes. The Rago Fabrication Exterior MOLLE Storage Panels include integrated mounting points designed for Rotopax mounts, making them a natural location for Rotopax fuel or water containers. Rotopax mounts are sold separately and are not included with the panels.

What MOLLE accessories and attachment methods are compatible?

The MOLLE grid on these panels accepts bolts, straps, zip ties, Quick Fists, and other standard MOLLE-compatible attachment systems. Carriage bolt slots built into the panel face provide an additional mounting method for long-handled tools such as shovels and axes.