Rago Fabrication 5th Gen 4Runner and GX 470 Air Mounts Set of 4

The Rago Fabrication Air Mounts are a set of four brushed aluminum wheel-well mounts designed to give 5th Gen Toyota 4Runner and GX 470 owners a secure, fast-connect point for an on-board air hose. Each mount installs using existing factory holes in the wheel well (some models require minimal drilling), and the full set of four covers a complete vehicle setup. Note: these mounts are not designed for the TRD PRO and would require modification to fit that model.

Brushed Aluminum That Will Not Rust

Rago Fabrication builds these mounts from brushed aluminum and backs them with a rust-free guarantee. Wheel wells take a constant beating from mud, water, and road debris. A mount that corrodes becomes a mount that seizes, strips, or fails at the worst moment. Brushed aluminum sidesteps that problem entirely, keeping the connection point clean and functional across seasons of hard use without the maintenance overhead of a painted or coated steel part.

Install Using Factory Holes

The Air Mounts are engineered to use existing factory holes in the wheel well, so most installations require no drilling at all. On models where a small amount of drilling is needed, the work remains minimal and the overall install stays straightforward. Keeping the install simple means less time in the driveway and more confidence that the mount is seated correctly (no fabrication experience required).

Fast Hose Connection at the Wheel Well

Positioning the air connection point at the wheel well puts it exactly where it is needed: close to the tire being inflated. With the mounts in place, connecting the air hose to the compressor is a quick operation rather than a routing exercise, which matters when airing up after a trail section or responding to a slow leak on the side of a road. The set of four covers all four corners of the vehicle.

Features

• Set of four: one mount per wheel well for full vehicle coverage
• Brushed aluminum construction: corrosion-resistant material with a rust-free guarantee
• Factory-hole installation: mounts to existing wheel-well holes; minimal drilling required on some models
• Fast hose connection: positions the air connection point at the wheel well for quick compressor hookup
• Made in USA: manufactured by Rago Fabrication in Chandler, Arizona

Specifications

Who This Is For and Isn't

These mounts suit 5th Gen Toyota 4Runner and GX 470 owners who are building or expanding an on-board air system and want a clean, permanent wheel-well connection point that installs without major fabrication work.

These mounts are not designed for the 4Runner TRD PRO; fitting that model would require modification. The mounts are fitment-specific to the 5th Gen 4Runner and GX 470 and are not a universal wheel-well mount.

Common Questions

What vehicles do these air mounts fit?

The Rago Fabrication Air Mounts are designed specifically for the 5th Gen Toyota 4Runner and the GX 470. They are not designed for the 4Runner TRD PRO; fitting that model would require modification. No other fitments are specified for this set.

Do I need to drill to install these mounts?

The Air Mounts are engineered to use existing factory holes in the wheel well. On some 5th Gen 4Runner and GX 470 models, a small amount of drilling is required, but the overall installation is described as simple and does not require fabrication experience.

How many mounts come in the set?

Each purchase includes a set of four Rago Fabrication Air Mounts (one for each wheel well), providing a complete air connection solution at all four corners of the vehicle.

Will these mounts rust in wet or muddy conditions?

The Air Mounts are constructed from brushed aluminum, which does not rust, and Rago Fabrication backs them with a rust-free guarantee. Brushed aluminum is well suited to the wheel-well environment, which is regularly exposed to water, mud, and road debris.