Rago Fabrication 2025+ Toyota 4Runner Ditch Light Brackets

The Rago Fabrication Ditch Light Brackets are a bolt-on pair of steel mounts designed for the 2025+ Toyota 4Runner (6th Gen), each capable of holding a pod light up to 6 inches in diameter. An adjustable mounting angle lets drivers direct light forward down the trail or sweep it toward the sides, while a low-profile design keeps both brackets outside the driver's and passenger's sightlines. The brackets ship as a pair and are finished in a dual-stage hammer black powder coat.

Aimed Where You Need It

The Rago Fabrication Ditch Light Brackets offer an adjustable mounting angle that can be set to face forward or angled toward either side of the trail. That flexibility means a single set of brackets can serve different lighting strategies: illuminating the path directly ahead, catching obstacles at the edges of the trail, or both. Adjustability also means the angle can be revisited as driving conditions or personal preference change, without replacing the hardware.

Out of the Sightline, Into the Trail

Ditch light mounts positioned too high or too far inboard can create glare or visual clutter for the driver and front passenger. The Rago Fabrication brackets are designed with a low-profile fitment that places each light outside both occupants' sightlines, so the added illumination improves what the driver can see on the trail without introducing new distractions inside the cab.

Clean Install, Clean Finish

The brackets use a fully bolt-on design. No cutting, welding, or modification to the 4Runner's body is required. Integrated wire management channels the pod light wiring cleanly along the bracket, keeping the installation tidy and reducing the chance of wiring chafe or exposure. The dual-stage hammer black powder coat finish is applied over durable steel construction, providing a surface that resists corrosion and complements the 4Runner's exterior trim.

Features

• Pod Light Capacity: accommodates pod lights up to 6 inches per bracket
• Adjustable Angle: mounts can be directed forward or toward the sides of the trail
• Low-Profile Positioning: sits outside driver and passenger sightlines
• Integrated Wire Management: routes wiring cleanly along the bracket
• Dual-Stage Hammer Black Powder Coat: resilient finish over durable steel construction
• Bolt-On Installation: no cutting or welding required; sold as a pair

Specifications

Who This Is For and Isn't

These brackets suit 2025+ Toyota 4Runner (6th Gen) owners who want to add pod-style ditch lights for improved off-road trail visibility. The adjustable angle and low-profile design make them a practical fit for overlanding and trail driving where forward and side illumination both matter.

These brackets do not fit 5th Gen or earlier Toyota 4Runner models. Pod lights are not included and must be sourced separately; each bracket accommodates a pod light up to 6 inches. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Common Questions

What size pod lights will these brackets hold?

Each Rago Fabrication Ditch Light Bracket accommodates a pod light up to 6 inches in diameter. The brackets are sold as a pair, so the set supports one pod light per side. Pod lights are not included and are purchased separately.

Can the mounting angle be changed after the brackets are installed?

Yes. The Rago Fabrication Ditch Light Brackets feature an adjustable mounting angle that can be set to face forward down the trail or angled toward either side, and that angle can be repositioned after installation to suit different lighting needs or terrain.

Will these brackets block the driver's or passenger's view?

The Rago Fabrication Ditch Light Brackets are designed with a low-profile fitment that positions each bracket outside both the driver's and front passenger's sightlines, so the mounted pod lights do not obstruct forward visibility from inside the cab.

Do these brackets fit a 5th Gen Toyota 4Runner?

No. The Rago Fabrication Ditch Light Brackets are designed specifically for the 2025+ Toyota 4Runner (6th Gen) and are not compatible with 5th Gen or earlier 4Runner models.

How is the wiring managed with these brackets?

The Rago Fabrication Ditch Light Brackets include integrated wire management that routes the pod light wiring cleanly along the bracket body, keeping the installation tidy and reducing wiring exposure without requiring additional conduit or adhesive mounts.