Rago Fabrication 2019-2024 Subaru Forester Ditch Light Brackets

The Rago Fabrication Ditch Light Brackets mount at the A-pillars of the 2019–2024 Subaru Forester, providing a low-profile, bolt-on solution for adding auxiliary lighting without cutting or drilling. Sold as a driver and passenger side pair, the brackets are built from steel and finished in a dual-stage hammer black powder coat. Slotted mounting holes accommodate 3-inch light pods and support lights up to 6 inches at each A-pillar.

Clean Installation, No Modifications Required

The fully bolt-on design means the brackets attach using existing mounting points on the 2019–2024 Forester: no cutting, no drilling, and no permanent changes to the vehicle. For owners who want a capable lighting setup without altering factory bodywork, that matters: the truck stays reversible, resale value is protected, and the install does not require body or fabrication work. The low-profile shape follows the factory A-pillar lines closely, so the brackets do not add visual bulk or interfere with the driver's field of view.

Adjustable Positioning for Precise Light Aim

Slotted mounting holes let the installer shift each bracket to dial in the exact lens angle before tightening down. Slotted holes allow the beam pattern to be set for the terrain and the specific lights being used, whether 3-inch pods or lights up to 6 inches, rather than accepting a fixed position. Integrated zip tie holes run alongside the mounting points, giving wiring a clean, organized path from the light to the cab without loose cables or aftermarket wire clips.

A Foundation for a Growing Build

The brackets are compatible with Rago extension accessories, including additional light mounting extensions (Part # RACCDITEXT) and a HAM antenna extension (Part # R0000ACCHAMEXT), both sold separately. That expandability means the ditch-light position can serve more than one function as a build develops, a practical consideration for overlanders who add gear incrementally rather than all at once. The dual-stage hammer black powder coat finish is built to handle exposure to moisture, dust, and UV without flaking or fading.

Features

• Sold as a pair: includes driver and passenger side brackets
• Light pod compatibility: ideal for 3-inch pods; supports lights up to 6 inches at each A-pillar
• Bolt-on installation: no cutting or drilling required
• Slotted mounting holes: adjustable for precise light positioning
• Wire management: integrated zip tie holes for a clean wiring run
• Expandable: compatible with Rago extension brackets (Part # RACCDITEXT) and HAM antenna extension (Part # R0000ACCHAMEXT), sold separately

Specifications

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

These brackets suit 2019–2024 Subaru Forester owners who want to add A-pillar ditch lighting for overlanding, trail driving, or off-road use and prefer a bolt-on install that leaves the vehicle unmodified. They work with a wide range of 3-inch light pods and can accommodate lights up to 6 inches at each A-pillar.

These brackets do not fit Subaru Forester model years outside 2019–2024, and they are not confirmed to fit any other Subaru model or vehicle make. Lights, wiring harnesses, and Rago extension accessories are not included and must be purchased separately.

Common Questions

What vehicles do these ditch light brackets fit?

The Rago Fabrication Ditch Light Brackets are designed specifically for the 2019–2024 Subaru Forester. They are not confirmed to fit any other Subaru model year, trim, or vehicle make, and fitment should not be assumed outside the stated range.

What size lights are compatible with these brackets?

The Forester ditch light brackets are designed for 3-inch light pods and can also support lights up to 6 inches at each A-pillar location. Lights are not included and must be sourced separately.

Do these brackets require drilling or cutting to install?

No. The Rago Fabrication Forester Ditch Light Brackets use a fully bolt-on design that attaches to existing mounting points. No cutting, drilling, or permanent modification to the vehicle is required.

How do the slotted mounting holes work?

The slotted mounting holes on these ditch light brackets allow the installer to shift each bracket's position before final tightening, making it possible to fine-tune the aim of the mounted light for the desired beam direction and coverage pattern.

Are extension accessories or antenna mounts included?

Extension accessories are not included. The Rago Fabrication Forester Ditch Light Brackets are compatible with the Rago light mounting extension (Part # RACCDITEXT) and the Rago HAM antenna extension (Part # R0000ACCHAMEXT), both of which are sold separately.

How is the finish protected against weather and corrosion?

The Rago Fabrication Forester Ditch Light Brackets are finished in a dual-stage hammer black powder coat, which is applied to the steel construction to resist moisture, dust, and environmental exposure during off-road and overlanding use.