Rago Fabrication 2016-2023 Tacoma Winch Front Bumper with Top Hoop

The Rago Fabrication Center-Mount Winch Front Bumper is a steel off-road front bumper for 2016–2023 Toyota Tacoma (3rd Gen) that integrates a hidden heavy-duty winch mount, a 30-inch single-row LED light bar mount, two cube-light mounts, a welded-on top hoop, and a pair of 1-inch thick D-ring mounts into a low-profile design that retains the factory fog lights and remains compatible with Toyota Safety Sense. Built in Chandler, Arizona, it ships as a single variant covering all 2016–2023 Tacoma fitments.

Trail Protection Without Bulk

The bumper's low-profile fitment keeps the Tacoma's approach angle and forward sightlines intact while adding steel coverage across the front fascia. The welded-on bull bar shields the lower grille from branches and trail debris that would otherwise reach the radiator or intercooler. Because the design retains the OEM fog light housings, no wiring relocation or aftermarket fog lights are required after installation.

Recovery and Lighting Ready from the Start

The hidden winch mount accepts 12K winches and keeps the winch body recessed behind the bumper face, preserving the low-profile look while providing a full vehicle self-recovery capability. The pair of 1-inch thick D-ring mounts give a dedicated attachment point for recovery straps and shackles without relying on tow hooks or frame tabs. The integrated 30-inch light bar mount and two cube-light mounts mean supplemental lighting can be added without separate brackets or drilling. The mounting points are already welded in.

Finish and Construction Built for Long-Term Use

Steel construction and a two-stage hammer black powder coat finish resist corrosion and surface wear from brush, mud, and road salt. The two-stage process (a primer stage followed by the textured topcoat) gives the finish better adhesion and chip resistance than a single-coat application. The bumper is manufactured in the USA at Rago Fabrication's Chandler, Arizona facility.

Features

• Welded-on top hoop: one integrated hoop provides a mounting point above the bumper face
• 30-inch LED light bar mount: integrated single-row mount, no separate bracket needed
• Dual cube-light mounts: two mounts sized for 3-inch cube lights
• Hidden 12K winch mount: center-mount plate accepts 12K winches, recessed behind bumper face
• 1-inch thick D-ring mounts: pair of heavy-duty mounts for recovery straps and shackles
• Toyota Safety Sense compatible: retains TSS sensor function and OEM fog lights
• Made in USA: manufactured at Rago Fabrication's Chandler, Arizona facility

Specifications

Who This Is For and Isn't

This bumper suits 2016–2023 Toyota Tacoma owners who want a single front-end upgrade that covers trail protection, winch mounting, D-ring recovery points, and supplemental lighting mounts while keeping the factory fog lights and Toyota Safety Sense active.

This bumper fits only the 2016–2023 Toyota Tacoma (3rd Gen) and does not fit earlier or later Tacoma generations or any other vehicle. The LED light bar, cube lights, winch, D-ring shackles, and skid plate are not included; the optional 3/16-inch aluminum skid plate and license plate bracket are sold separately.

Common Questions

Which Tacoma years and generations does this bumper fit?

The Rago Fabrication Center-Mount Winch Front Bumper fits 2016–2023 Toyota Tacoma (3rd Gen) only. It does not fit 1st Gen (1995–2004) or 2nd Gen (2005–2015) Tacoma models, and this bumper is not confirmed to fit 2024 or later Tacoma generations.

What winch sizes fit the hidden winch mount?

The center-mount winch plate on this bumper is designed to accept 12K (12,000 lb) winches. Consult the Rago Fabrication install guide for bolt-pattern and mounting-plate dimensions before purchasing a winch to confirm compatibility with a specific model.

Does this bumper work with Toyota Safety Sense?

Yes. The Rago Fabrication Tacoma Winch Front Bumper is designed to be compatible with Toyota Safety Sense (TSS), meaning the pre-collision sensor and related systems retain their function after installation. The bumper also retains the factory fog light housings.

Are the light bar, cube lights, winch, and skid plate included?

No. The bumper includes the integrated mounts for a 30-inch single-row LED light bar, two 3-inch cube lights, a 12K winch, and a pair of D-ring shackles, but none of those accessories are included. The optional 3/16-inch aluminum skid plate and the license plate bracket are sold separately.

Is a California Proposition 65 warning associated with this product?

Yes. This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, visit P65Warnings.ca.gov.