Power Tank Regulator Flip Kit for Super Flow Horizontal Mounts

The Power Tank Regulator Flip Kit is a two-piece hardware set that adds a 45-degree angle to the back of a Power Tank Super Flow regulator, correcting the outlet orientation when the regulator is mounted horizontally. The kit includes a 1/4 MNPT x 1/4 FNPT brass elbow and a short nipple sized for CGA-320 connections.

Correct the Angle, Keep the Connection Secure

When a Super Flow regulator is flipped to sit on a horizontal mount, the standard straight fitting at the back of the regulator points in the wrong direction, putting stress on the high-pressure connection and making hose routing awkward. The Regulator Flip Kit resolves this by introducing a 45-degree offset at the regulator inlet, so the high-pressure line exits at an angle that suits horizontal mounting geometry without bending or straining the fitting.

High-Pressure Side Hardware

The brass elbow in this kit handles the high-pressure side of the Power Tank system: the connection between the CO2 tank and the regulator body. Because this fitting is upstream of the regulator, Power Tank recommends having the modification performed on a newly purchased regulator or sending an existing regulator in for professional installation rather than attempting a field swap.

Features

• 45-degree brass elbow: 1/4 MNPT x 1/4 FNPT, corrects outlet angle for horizontal regulator mounting
• Short nipple for CGA-320: sized to mate with standard CO2 cylinder valve connections
• High-pressure rated: designed for the high-pressure inlet side of the Super Flow regulator

Specifications

Who This Is For and Isn't

The Regulator Flip Kit suits Power Tank Super Flow regulator owners who are running or planning a horizontal mount setup and need the high-pressure inlet to exit at a 45-degree offset rather than straight back.

This kit is not compatible with regulators other than the Power Tank Super Flow, and it does not include the regulator itself. For owners of existing regulators, Power Tank recommends sending the unit in for professional installation rather than performing a DIY install.

Common Questions

Which regulator does the Regulator Flip Kit fit?

The Regulator Flip Kit is designed specifically for the Power Tank Super Flow regulator. It is not stated as compatible with other Power Tank regulator models or third-party regulators, so buyers should confirm they have a Super Flow before ordering.

What is included in the kit?

The Regulator Flip Kit includes two pieces: a 45-degree brass elbow with 1/4 MNPT x 1/4 FNPT threads, and a short nipple sized for CGA-320 CO2 cylinder valve connections. The Super Flow regulator itself is sold separately.

Can this kit be installed at home?

The Regulator Flip Kit modifies the high-pressure inlet side of the Super Flow regulator. Power Tank recommends adding this kit to a newly purchased regulator or sending an existing regulator in for professional installation rather than performing a DIY install.

Why is a 45-degree elbow needed for horizontal mounts?

When a Super Flow regulator is oriented horizontally rather than vertically, the standard straight inlet fitting points in a direction that can stress the high-pressure hose connection and complicate routing. The Regulator Flip Kit's 45-degree elbow redirects the inlet angle to suit horizontal mounting without straining the fitting.