Power Tank 60D TPG RED 60 psi Backlit Digital Modular Tire Pressure Gauge

The Power Tank 60D TPG RED is a standalone backlit digital tire pressure gauge covering 1.5–60 psi with 1% accuracy (+/-0.6 psi), built around the RED MOD quick-switch coupler system for use with Schrader valves and Monster Valves. It ships with a precision gauge, quick-switch coupler, and a HiPPO2 Hi-Pressure Push-On/Pull-Off tire chuck.

Real-Time Readings Without Mechanical Drift

The 60D TPG RED uses a digital sensor with no mechanical parts, so it holds calibration longer than an analog gauge and can be recalibrated when needed. Drivers who rely on precise pressures during airing-up and airing-down sessions get a reading they can trust rather than one that has drifted with wear. The backlit display stays readable in low light, whether that is pre-dawn at a trailhead or inside a dark wheel well. At 1% accuracy (+/-0.6 psi), the gauge delivers readings that are twice as accurate as the 0-60 psi analog alternative.

AAA Batteries, 200-Hour Run Time

The 60D TPG RED runs on AAA batteries, which are easy to source and carry as spares anywhere. A 200-hour rated run time means the gauge will last through years of regular use before a battery swap is needed. No proprietary charging cables are required, and there is no risk of arriving at a trailhead with a dead gauge.

Modular RED MOD Compatibility

The 60D TPG RED uses the same RED MOD attachment system as the Ventoso RED tire inflator gauges, so it accepts the same quick-switch tire chucks and optional 2 ft hose extension (each sold separately). Swapping between a push-on chuck for standard wheels and other RED MOD accessories requires no tools. The compact form factor makes the TPG RED practical to carry as a dedicated pressure-check tool alongside a separate inflator.

Features

• Backlit digital display: 1.5–60 psi range, readable in low light
• 1% accuracy: +/-0.6 psi, recalibratable, no mechanical parts
• 200-hour battery life: powered by standard AAA batteries
• RED MOD system: quick-switch coupler accepts RED MOD tire chucks and hose extensions
• HiPPO2 tire chuck included: Hi-Pressure Push-On/Pull-Off narrow chuck, compatible with all wheels
• Monster Valve compatible: monitors pressure second-to-second through a Schrader or Monster Valve while airing up or down

Specifications

Who This Is For and Isn't

The 60D TPG RED suits overlanders, 4x4 drivers, and track-day drivers who want a dedicated digital pressure gauge for vehicles with tire pressures up to 55 psi. It works with Schrader valves and Monster Valves and integrates directly into any RED MOD setup for quick chuck swaps.

The 60D TPG RED is a pressure gauge only, not a tire inflator, and does not inflate tires. The gauge reads to a maximum of 60 psi and is not suited for tires that require readings above that ceiling. Optional 2 ft hose extensions and additional tire chucks are sold separately and are not included.

Common Questions

What pressure range does the 60D TPG RED cover?

The Power Tank 60D TPG RED reads tire pressure from 1.5 to 60 psi, making it suitable for 4x4s and passenger vehicles with operating pressures up to 55 psi. The digital sensor carries a 1% accuracy rating of +/-0.6 psi and can be recalibrated when needed.

What batteries does the gauge use and how long do they last?

The 60D TPG RED is powered by standard AAA batteries with a rated run time of 200 hours. AAA batteries are widely available, making it straightforward to carry spares on a trip without relying on a charging cable or proprietary power source.

What comes included with the 60D TPG RED?

The Power Tank 60D TPG RED ships with a precision gauge, a RED MOD quick-switch coupler, and a HiPPO2 Hi-Pressure Push-On/Pull-Off tire chuck. A 2 ft hose extension and additional push-on tire chucks are available separately as RED MOD accessories.

Can the 60D TPG RED be recalibrated?

Yes. The 60D TPG RED digital gauge supports recalibration, which allows the gauge to be brought back to spec if readings drift over time. This is an advantage over analog gauges, which cannot be recalibrated once their mechanical components wear.

Does the 60D TPG RED work with Monster Valves?

The 60D TPG RED is compatible with Schrader valves and Monster Valves. When used with Monster Valves, the gauge can monitor tire pressure second-to-second during airing-up and airing-down, giving the driver a continuous live reading throughout the process.

What other RED MOD accessories are compatible with the 60D TPG RED?

The 60D TPG RED uses the same RED MOD attachment system as the Ventoso RED tire inflator gauges. It accepts RED MOD quick-switch tire chucks and the optional 2 ft hose extension, each sold separately, allowing the gauge to be configured for different wheel types or reach requirements.