Power Tank 4-Door Ford Bronco CO2 and Propane Roll Bar Mount

The Power Tank 4-Door Ford Bronco Roll Bar Mount is a vehicle-specific bracket that bolts to the roll bar of a 4-door Ford Bronco (2021+) to hold a Power Tank CO2 tank, a propane tank, or a quick-release fire extinguisher bracket, with no wiring to connect and no air-hose plumbing required. The mount is available in driver-side and passenger-side configurations; specify the side when ordering.

One Bracket, Two Critical Trail Tools

Keeping a CO2 tank and a fire extinguisher within reach on a trail run means faster airing up and a faster response if something goes wrong. The Bronco Roll Bar Mount dedicates a secure, fixed position to both, so neither is rattling around in the bed or buried under gear when it's needed. Expansion slots built into the plate leave room for additional accessories as Power Tank releases future compatible products.

Rigid Enough to Trust at Speed

The mount's powdercoated steel frame and powdercoated aluminum roll bar clamps are designed to hold a loaded Power Tank without flex or movement across rough terrain. When properly installed, the assembly is rigid enough that shaking the tank moves the whole vehicle, a meaningful standard for a mount that will see washboard roads and rocky descents. The roll bar clamps are also usable on their own as a base for mounting other accessories independently of the plate.

Bolt-On in Under 20 Minutes

The Bronco Roll Bar Mount installs with simple hand tools in less than 20 minutes. There is no wiring to connect and no air hose to route, so the install does not require cutting into the vehicle or modifying any existing system. Stainless steel hardware is included. A MOLLE Plate Extension is available separately and attaches to the front of the bracket to add a MOLLE-compatible gear grid.

Features

• Roll bar fitment: bolts directly to the roll bar of a 4-door Ford Bronco (2021+), soft top or hard top
• Tank compatibility: accepts 5 lb, 10 lb, and 15 lb Power Tanks; 5 lb steel, 6 lb aluminum, 10 lb aluminum, and 11 lb steel propane tanks (brackets not included)
• Fire extinguisher slot: dedicated mounting position for a quick-release fire extinguisher bracket
• Expansion slots: built-in slots for future Power Tank accessories
• Side-specific: available in driver-side and passenger-side configurations
• Hardware: stainless steel fasteners included; frame is powdercoated steel, clamps are powdercoated aluminum

Specifications

Who This Is For and Isn't

This mount suits 4-door Ford Bronco owners (2021 and newer, soft top or hard top) who want a fixed, secure in-cab position for a Power Tank CO2 system or propane tank alongside a fire extinguisher bracket. Bronco Raptor owners can use this mount after removing the black reinforcement bar from the roll bar.

This bracket does not fit the 2-door Ford Bronco; a separate plate exists for that application. The mount does not include a Power Tank, a propane tank, a propane tank bracket, or a Power Tank Super Bracket; the Super Bracket is required to mount a Power Tank and must be purchased separately if not already included with the tank package. A quick-release fire extinguisher bracket is also not included.

Common Questions

Does this fit the 2-door Ford Bronco?

The Power Tank 4-Door Bronco Roll Bar Mount is designed specifically for the 4-door Ford Bronco (2021+) and does not fit the 2-door model. Power Tank makes a separate roll bar plate for the 2-door Bronco (2021+).

Which Power Tank sizes does this bracket support?

The Bronco Roll Bar Mount accepts 5 lb, 10 lb, and 15 lb Power Tanks. Mounting any of these requires a Power Tank Super Bracket, which is included in most 5 lb, 10 lb, and 15 lb Power Tank packages but is not included with this bracket and must be purchased separately if not already on hand.

Can I mount a propane tank instead of a CO2 tank?

Yes. The Bronco Roll Bar Mount is compatible with 5 lb steel, 6 lb aluminum, 10 lb aluminum, and 11 lb steel propane tanks when the appropriate propane tank bracket is used. Propane tank brackets are not included with this mount and must be sourced separately.

Does this bracket fit the Bronco Raptor?

The Bronco Roll Bar Mount can be used in a Bronco Raptor, but the black reinforcement bar must first be removed from the roll bar. The mount otherwise fits the standard 4-door Bronco (2021+) roll bar without modification.

What tools are needed, and how long does installation take?

The Bronco Roll Bar Mount installs using simple hand tools in less than 20 minutes. No wiring and no air-hose plumbing are required. Stainless steel hardware is included in the box.

Is a fire extinguisher bracket included?

A quick-release fire extinguisher bracket is not included with the Bronco Roll Bar Mount. The plate has a dedicated mounting position for one, and a compatible quick-release fire extinguisher bracket is available as a separate accessory.