Power Tank 3000 PSI Super Flow Regulator Replacement Gauge

The Power Tank 3000 PSI replacement top gauge is a direct-fit repair part for any Power Tank Super Flow CO2 regulator, regardless of the regulator's age. At 1.5 inches in diameter with 1/8" NPT threads and silicone-filled internals, it threads into the regulator's top gauge port without adapters or modification. A rubber boot is included as stock allows; Power Tank has discontinued boot restocking, so some units ship without one.

Silicone Fill for Legible Readings in the Field

Silicone-filled gauges use fluid inside the housing to dampen needle movement, reducing the vibration-related wear that can make a dry gauge hard to read on rough terrain. The fill also resists internal fogging caused by moisture or rapid temperature changes, keeping the pressure reading visible when it matters most. These properties make silicone fill the standard choice for gauges used in demanding off-road and outdoor environments.

Direct Fit Across the Super Flow Lineup

The 1/8" NPT thread is a direct match for the top gauge port on every Power Tank Super Flow regulator produced to date, so there is no need to match a production year or generation before ordering. The 1.5-inch diameter face fits the same footprint as the original gauge, keeping the regulator's profile unchanged after the swap.

Features

• 3000 PSI rating: matches the pressure range of Power Tank Super Flow CO2 regulators
• 1.5 in. diameter face: same footprint as the original top gauge
• 1/8" NPT threads: direct thread-in fit, no adapters required
• Silicone-filled internals: dampens needle vibration and resists internal fogging
• Rubber boot: included as stock allows; boots will not be restocked by Power Tank

Specifications

Who This Is For and Isn't

This gauge suits any Power Tank Super Flow CO2 regulator owner who needs to replace a broken, cracked, or unreadable top gauge. Because it fits the full Super Flow lineup regardless of age, it works as a long-term spare as well as an immediate repair part.

This gauge is not compatible with regulators from other brands or with regulators that use a different port thread standard than 1/8" NPT. It does not include a rubber boot when boot stock is depleted, and Power Tank will not restock boots; buyers who require a boot should confirm availability before ordering.

Common Questions

Which regulators does this gauge fit?

The Power Tank 3000 PSI replacement top gauge is a direct fit for any Power Tank Super Flow CO2 regulator, regardless of when the regulator was manufactured. It uses 1/8" NPT threads and installs into the regulator's top gauge port without adapters or modification. It is not designed for regulators from other brands or for regulators that use a different port thread standard.

Is the rubber boot always included?

A rubber boot ships with the Power Tank replacement gauge as stock allows. Power Tank has stated that boot inventory will not be restocked, so some units may arrive without one. The gauge functions identically with or without the boot; the boot provides grip and protects the gauge body from minor impacts during use and storage.

What does silicone-filled mean for a pressure gauge?

A silicone-filled gauge contains silicone fluid inside the housing that dampens needle movement and reduces vibration-related wear on internal components. The fill also helps prevent moisture from condensing on the inside of the lens, keeping the pressure reading legible in cold or humid field conditions. This construction is standard in gauges used in demanding outdoor and off-road environments.

How is this gauge installed?

The Power Tank 3000 PSI replacement gauge threads directly into the top gauge port of a Power Tank Super Flow regulator using its 1/8" NPT threads. A wrench sized for the gauge fitting is all that is needed; no special tools or adapters are required. Always depressurize the regulator fully before removing the original gauge.