Pelican 1610 Protector Case Opened Box

The Pelican 1610 Protector Case is a large, wheeled hard case made in the USA from high-impact polyethylene, built to protect sensitive gear across road, trail, and air transport. Interior dimensions of 21.78 x 16.69 x 10.62 inches and an internal volume of 2.23 cubic feet accommodate bulky equipment loads. This listing is an opened-box unit: the case is a genuine Pelican 1610 in the original configuration, sold as opened-box condition.

Pressure-Equalizing Protection on the Move

The 1610 Protector Case includes an automatic purge valve with a 3-micron hydrophobic non-woven vent membrane and a 70 Shore nitrile O-ring. The valve equalizes air pressure automatically as altitude or temperature changes during transport, preventing the lid from vacuum-sealing shut after a flight or a fast elevation gain. This is a practical advantage when you need to open the case quickly at a trailhead or on a tarmac. The watertight silicone O-ring lid seal keeps moisture and dust out regardless of conditions.

Hardware Built for Rough Handling

Four push-button latches in ABS with stainless steel pins provide secure closure and release without tools. Over-molded rubber handles and stainless steel hardware resist corrosion and maintain grip in wet or cold conditions. The polyethylene body is rated crushproof and dustproof, and the case is rated for temperatures from -40°F to 190°F (-40°C to 87°C), covering storage in an unheated vehicle in winter or a sun-baked truck bed in summer.

Four-Layer Foam Interior

The case ships with four layers of 1.3 lb polyurethane foam. The foam provides cushioning for fragile or high-value equipment and can be cut to a custom fit. The padlock hole diameter of 0.31 inches (0.79 cm) accepts a standard padlock shackle for added security in transit.

Features

• Automatic purge valve: 3-micron hydrophobic vent with nitrile O-ring equalizes pressure without manual intervention
• Watertight O-ring lid seal: silicone O-ring runs the full perimeter of the lid
• Four push-button latches: ABS latches with stainless steel pins, no tools required to open
• Four-layer polyurethane foam: 1.3 lb density foam, cuttable to fit
• Temperature rated: -40°F to 190°F (-40°C to 87°C)
• Made in the USA: polyethylene body, stainless steel hardware

Specifications

Who This Is For and Isn't

The Pelican 1610 Protector Case suits overlanders, photographers, and field professionals who need a large, lockable, crushproof enclosure for cameras, electronics, medical supplies, or other high-value equipment transported by vehicle or air. The opened-box condition makes it a practical choice for buyers who want a genuine Pelican 1610 at a reduced cost and do not require factory-sealed packaging.

This listing is a single opened-box unit; it is not new old stock and not factory sealed. No load rating is stated for the case lid or base, so it should not be used as a step or work platform. Weight with foam installed is not stated; buyers who need total packed weight for airline weight limits should weigh the case with their specific foam configuration.

Common Questions

What does "opened box" mean for this Pelican 1610?

The Pelican 1610 Protector Case in this listing has been opened from its original factory packaging. It is a genuine Pelican 1610 in the standard production configuration (polyethylene body, four-layer foam, purge valve, and all hardware), sold as opened-box rather than factory sealed. It is not a used or previously fielded case.

Is the foam pre-cut, or does it need to be cut to fit?

The Pelican 1610 Protector Case includes four layers of 1.3 lb polyurethane foam, but whether the foam arrives pre-cut or as solid pick-and-pluck layers is not specified in the available product data. If a specific foam configuration is required, confirm with TerrainVault before ordering.

Can this case be padlocked?

The Pelican 1610 Protector Case has a padlock hole with a diameter of 0.31 inches (0.79 cm) on the latch assembly. A standard padlock with a shackle that fits that diameter can be used to secure the case in transit. A padlock is not included.

Is the case approved for airline checked baggage?

The Pelican 1610 Protector Case is described as suitable for air transport, but airline approval status and TSA-lock compatibility are not specified in the available product data. Buyers traveling with regulated contents or requiring specific airline approval should verify compliance with their carrier before travel.

What is the weight of the case with foam installed?

The Pelican 1610 Protector Case weighs 19.50 lbs (8.85 kg) without foam installed. The weight with all four foam layers installed is not stated in the available product data.