Pedco UltraClamp 360 Swiveling Camera and Device Mount
Pedco UltraClamp 360 Swiveling Camera and Device Mount
Couldn't load pickup availability
The Pedco UltraClamp 360 is a swiveling clamp mount for cameras, spotting scopes, and camcorders, built around a full 360-degree panning head and a 1/4-20 tripod socket that fits most imaging devices. The clamp body is aluminum; the head and knobs are injection-molded, glass-reinforced nylon thermoplastic resin. It attaches to round or flat objects up to 1.5 inches (3.8 cm) thick, has a maximum safe load of 6 lbs (2.7 kg), and weighs 5.5 oz (157 g).
A Stable Platform Wherever You Stop
Mounting a camera to a car window, bicycle handlebar, or picnic table normally means improvising with gear that was designed for something else. The UltraClamp 360 clamps directly to those surfaces (rolled-down window glass, a round handlebar, a flat table edge) without requiring a traditional tripod. That means you can set up a stable shot in seconds at a trailhead, a race course, or a wildlife overlook without carrying a full tripod or hunting for level ground.
360-Degree Panning Without Repositioning the Clamp
The swiveling head rotates a full 360 degrees and positions the attached device at any angle, so you can follow a moving subject (a bike race, a bird in flight, a vehicle on a trail) without unclamping and repositioning. The clamp stays fixed to the surface while the head does the work, keeping the shot smooth and the setup time short.
Built to Hold What You Bring
The aluminum clamp body and screw handle a maximum safe load of 6 lbs (2.7 kg), which covers most compact cameras, mirrorless bodies, spotting scopes, and camcorders. The glass-reinforced nylon thermoplastic resin head and knobs resist flex under load. At 5.5 oz (157 g), the UltraClamp 360 adds little weight to a pack or a vehicle kit.
Features
- Full 360-degree panning: swiveling head rotates continuously and positions the device at any angle
- Universal 1/4-20 tripod socket: fits cameras, spotting scopes, camcorders, and other devices with a standard tripod thread
- Wide clamp range: attaches to round or flat objects from 0 to 1.5 inches (3.8 cm) thick
- Aluminum clamp body and screw: durable construction rated to a 6 lb (2.7 kg) maximum safe load
- Glass-reinforced nylon head and knobs: injection-molded thermoplastic resin resists flex and wear
- Compact and light: 3 x 1 5/8 x 5 1/2 inches (8 x 4 x 14 cm), 5.5 oz (157 g)
Specifications
| Specification | Value |
|---|---|
| Clamp body material | Aluminum |
| Head and knob material | Injection-molded, glass-reinforced nylon thermoplastic resin |
| Dimensions | 3 x 1 5/8 x 5 1/2 in (8 x 4 x 14 cm) |
| Weight | 5.5 oz (157 g) |
| Maximum safe load | 6 lbs (2.7 kg) |
| Clamp range | 0 to 1.5 in (0 to 3.8 cm) thick, round or flat objects |
| Thread compatibility | 1/4-20 tripod socket |
| Panning range | 360 degrees |
Who This Is For and Isn't
The UltraClamp 360 suits photographers, videographers, and outdoor enthusiasts who need a quick, stable camera or optics mount on surfaces a tripod cannot reach: car windows, handlebars, table edges, or similar round and flat objects up to 1.5 inches thick. Any device with a standard 1/4-20 tripod socket and a weight at or under 6 lbs is compatible.
The UltraClamp 360 does not fit objects thicker than 1.5 inches (3.8 cm) and is not designed for devices without a 1/4-20 tripod socket. It is not rated for loads above 6 lbs (2.7 kg).
Common Questions
What surfaces can the UltraClamp 360 attach to?
The UltraClamp 360 clamps to round or flat objects from 0 to 1.5 inches (3.8 cm) thick. Typical mounting surfaces include a rolled-down car window, a bicycle handlebar, and a picnic table edge. Objects thicker than 1.5 inches fall outside the clamp's rated range.
What devices will it hold?
The UltraClamp 360 is compatible with any device that has a standard 1/4-20 tripod socket, including compact cameras, mirrorless cameras, camcorders, and spotting scopes. The maximum safe load is 6 lbs (2.7 kg); devices heavier than that should not be used with this mount.
How does the panning head work?
The UltraClamp 360's swiveling head rotates a full 360 degrees and can be positioned at any angle, letting you follow a moving subject or reframe a shot without unclamping the mount from the surface. The clamp body stays fixed while the head adjusts.
How much does the UltraClamp 360 weigh, and how large is it?
The UltraClamp 360 weighs 5.5 oz (157 g) and measures 3 x 1 5/8 x 5 1/2 inches (8 x 4 x 14 cm), making it compact enough to carry in a camera bag, pack, or vehicle kit without adding meaningful bulk.
Share
