ICON Vehicle Dynamics Toyota Land Cruiser 80 Series Front 3-Inch Dual Rate Coil Spring Kit

The ICON Vehicle Dynamics Front Dual Rate Coil Spring Kit is engineered specifically for 1991–1997 Toyota Land Cruiser 80 Series trucks, delivering 3 inches of front lift with a vehicle-specific dual-rate spring design that improves ride quality on pavement and bottom-out resistance on rough terrain. OEM wheels and tires fit with this kit installed. Available in one configuration (SKU 53005).

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Dual-Rate Design for On- and Off-Road Confidence

The dual-rate coil spring construction uses two distinct spring rates in a single coil: a softer initial rate absorbs small road imperfections during everyday driving, while the stiffer secondary rate engages under heavier load or larger suspension inputs off-road. For an 80 Series owner who splits time between highway miles and trail use, this means the front end does not have to be tuned for one condition at the expense of the other.

Increased Front Wheel Travel When Paired with ICON Shocks

When installed alongside compatible ICON shock absorbers (sold separately), these coil springs allow up to 40% more front wheel travel compared to stock. Greater travel lets the front suspension articulate further over obstacles without lifting a tire, which improves traction and stability on uneven terrain. The springs alone provide the lift and spring-rate improvement; the full travel gain requires matching ICON shocks.

Corrosion-Resistant Finish Built for Long-Term Use

Each spring is finished in a semi-gloss powder coat that resists corrosion from mud, water, and road salt. The coating is applied over the full coil, protecting the spring body through repeated flex cycles and extended exposure to harsh environments.

Features

• Vehicle-specific fitment: designed exclusively for 1991–1997 Toyota Land Cruiser 80 Series front suspension
• 3-inch front lift: raises front ride height 3 inches over stock on a typically accessory-loaded 80 Series build
• Dual-rate coil design: improves both on-road ride quality and off-road bottom-out resistance over stock springs
• Up to 40% more front wheel travel: achieved when paired with compatible ICON shock absorbers (shocks sold separately)
• Semi-gloss powder coat: provides corrosion resistance for demanding environments

Specifications

Who This Is For and Isn't

This coil spring kit suits 1991–1997 Toyota Land Cruiser 80 Series owners who want 3 inches of front lift and improved suspension performance for mixed on-road and off-road use. It is compatible with OEM wheels and tires, and pairs with ICON shock absorbers for maximum front wheel travel.

This kit fits only 1991–1997 Toyota Land Cruiser 80 Series front suspension. It covers the front axle only; a separate rear lift solution is required for a full-vehicle lift. Shock absorbers are not included; the 40% wheel travel increase requires compatible ICON shocks purchased separately. Tires larger than 33x11.50 inches may require fender trimming and additional modifications. Actual lift height may exceed 3 inches on vehicles without the added weight of accessories such as a heavy front bumper or winch, as the advertised lift height is based on a typically accessory-loaded 80 Series build.

Common Questions

Do these springs fit all Toyota Land Cruiser models?

The ICON Front Dual Rate Coil Spring Kit (SKU 53005) fits only 1991–1997 Toyota Land Cruiser 80 Series trucks. It is not compatible with other Land Cruiser generations, model years outside that range, or other Toyota platforms.

Are shock absorbers included with this kit?

Shock absorbers are not included. The coil spring kit installs in place of the factory front springs and delivers the 3-inch lift on its own. The advertised 40% increase in front wheel travel is only achieved when these springs are paired with compatible ICON shock absorbers, which are sold separately.

Will my stock wheels and tires still fit after installation?

Yes. OEM wheels and tires are confirmed to fit with this kit installed. For aftermarket fitment, ICON recommends a 17x8.5-inch wheel with 4.63-inch backspace and a 33x11.50-inch tire. Tires larger than 33x11.50 inches may fit but could require fender trimming and other modifications.

Why might my actual lift height differ from the stated 3 inches?

ICON bases its advertised 3-inch lift height on a typical 80 Series build that includes the added weight of accessories such as a heavy front bumper and winch. On a stock-weight vehicle without those accessories, the front lift height may come out higher than 3 inches because the springs are not compressed as much at rest.

Is there a California Proposition 65 warning for this product?

Yes. This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm. This warning applies to California residents under Proposition 65.