ICON Vehicle Dynamics Stage 1 Suspension System for 1996-2002 Toyota 4Runner 0-3" Lift

The ICON Vehicle Dynamics Stage 1 Suspension System is a complete front-and-rear suspension upgrade for 1996–2002 Toyota 4Runner (3rd Gen) that delivers 0–3 inches of adjustable lift height using 2.5 VS Series coilovers up front and 2.0 VS Series rear shocks. The bolt-on system is engineered specifically for the 3rd Gen platform and fits vehicles running OEM wheels and tires without modification.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Vehicle-Specific Valving for On- and Off-Road Control

Each shock in this Stage 1 system uses valving tuned to the weight and suspension geometry of the 1996–2002 4Runner rather than a generic off-road calibration. The front coilovers and rear shocks respond predictably across the full range of terrain: graded dirt roads, rocky two-track, and highway miles between. FK Rod End bearings reduce deflection at the coilover mount, keeping the shock moving on its intended axis even under lateral load.

Adjustable Lift and Long-Term Serviceability

The 2.5 VS Series coilovers are height-adjustable across the full 0–3 inch lift range, so the ride height can be dialed in after install rather than locked in at the factory. The CAD-plated coilover shock body and 7/8 inch shaft resist corrosion over years of use in wet and muddy conditions. Both the coilovers and rear shocks are fully rebuildable and revalveable, meaning worn seals or a ride-quality change for a heavier build can be addressed without replacing the entire unit.

CNC-Machined 6061 Aluminum Construction

Structural components are CNC-machined from 6061 aircraft-grade aluminum, which keeps unsprung weight low while maintaining the strength needed for repeated off-road impacts. ICON-engineered coil springs are matched to the 4Runner's application rather than sourced as generic replacements, contributing to the system's damping consistency across lift heights.

Features

• Adjustable lift height: 0–3 inches via 2.5 VS Series front coilovers
• Vehicle-specific shock valving: tuned front and rear for the 1996–2002 4Runner
• FK Rod End bearings: extended longevity and minimal deflection at coilover mount
• Fully rebuildable and revalveable: coilovers and rear shocks can be serviced or recalibrated
• CNC-machined 6061 aluminum components: corrosion-resistant CAD-plated coilover body with 7/8 inch shaft
• Bolt-on installation: no cutting or fabrication required

Specifications

Who This Is For and Isn't

This system suits 1996–2002 Toyota 4Runner owners who want a bolt-on suspension upgrade with 0–3 inches of adjustable lift, improved damping on and off road, and long-term serviceability. Lift heights stated are calibrated for a stock-equipped vehicle; a 700 lb/in expedition coil is available separately for heavier-equipped builds.

This system does not fit any Toyota 4Runner outside the 1996–2002 model years. A bump stop spacer kit that increases threads beyond the maximum recommendation is sold separately and is not included. Larger tires beyond 33x11.25 inches may require fender trimming and additional modifications not covered by this kit.

Common Questions

What vehicles does this Stage 1 system fit?

The ICON Stage 1 Suspension System is designed exclusively for 1996–2002 Toyota 4Runner (3rd Gen). It does not fit earlier or later 4Runner generations, and fitment should not be assumed for any other Toyota platform.

What components are included in the kit?

The Stage 1 system includes one 2.5 VS Series IR Coilover Kit for the front axle and two 2.0 VS Series NR shocks for the rear. ICON-engineered coil springs are part of the coilover kit. A bump stop spacer kit and expedition-rate coil spring are available separately but are not included.

Will OEM wheels and tires still fit after installation?

Yes. The ICON Stage 1 system is confirmed compatible with OEM wheels and tires on the 1996–2002 4Runner. Tires up to 33x11.25 inches are recommended for aftermarket fitment; larger tires may fit but can require fender trimming and additional modifications.

Can the lift height be adjusted after installation?

Yes. The 2.5 VS Series front coilovers are adjustable across the full 0–3 inch lift range after installation. Stated lift heights are based on a stock-equipped vehicle; actual ride height will vary with added accessories, armor, or cargo weight.

Are the shocks rebuildable?

Both the front coilovers and rear shocks in this Stage 1 system are fully rebuildable and revalveable. Worn seals can be replaced and valving can be recalibrated for a different ride character or a heavier vehicle build without replacing the complete unit.