ICON Vehicle Dynamics Front 1.375" Bump Stop Spacer Kit for 1999-2004 Ford F-250 & F-350 / 2000-2005 Excursion 4WD

The ICON Vehicle Dynamics Front Bump Stop Spacer Kit repositions the factory front bump stops 1.375" lower on 1999–2004 Ford F-250 and F-350 Super Duty 4WD trucks and 2000–2005 Ford Excursion 4WD models running 3–6" of front lift, preventing suspension over-compression that can damage leaf springs, shocks, and shock mounts during hard off-road use.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Protecting the Suspension You Already Have

When a Super Duty or Excursion is lifted 3–6" without relocating the bump stops, the factory stops no longer contact the axle at the right point in the suspension stroke. The result is that the suspension can compress past its designed limit, putting destructive stress on leaf springs, shock bodies, and the mounts that hold them. The ICON bump stop spacer kit corrects that geometry by dropping the stops 1.375", restoring the intended contact point and keeping every component in the suspension working within its rated range.

CNC-Cut Steel, Bolt-On Installation

Each spacer is fabricated from precision CNC laser-cut steel plate and tubing, giving the kit the structural strength to absorb repeated high-load impacts without deforming. A semi-gloss black powder coat finish adds corrosion resistance suited to the mud, water, and road salt that lifted work trucks and trail rigs encounter. The bolt-on design requires no drilling, cutting, or permanent modification to the vehicle, so the installation can be completed without specialized fabrication tools.

Who This Is For and Isn't

This kit is designed for owners of 1999–2004 Ford F-250 or F-350 Super Duty 4WD trucks and 2000–2005 Ford Excursion 4WD models that have been lifted between 3 and 6 inches at the front and need to restore proper bump stop contact to protect suspension components during off-road use or heavy suspension cycling.

This kit does not fit 2WD F-250, F-350, or Excursion models, and it does not fit early 1999 production Super Duty trucks. It is not intended for vehicles with less than 3" or more than 6" of front lift.

Common Questions

Which exact vehicles does this bump stop spacer kit fit?

The ICON Front Bump Stop Spacer Kit fits 1999–2004 Ford F-250 Super Duty 4WD, 1999–2004 Ford F-350 Super Duty 4WD, and 2000–2005 Ford Excursion 4WD. It does not fit early 1999 production Super Duty models or any 2WD variant of these trucks.

What lift range is required for this kit to work correctly?

The ICON bump stop spacers are designed for vehicles with 3–6" of front lift over stock ride height. Running the spacers outside that range means the bump stop geometry may not be corrected as intended, and suspension protection may be compromised.

Does installation require cutting or welding?

No. The ICON Front Bump Stop Spacer Kit uses a bolt-on design that attaches to existing mounting points without drilling, cutting, or welding. No permanent modifications to the vehicle are required.

What is the kit made from?

The spacers are fabricated from precision CNC laser-cut steel plate and tubing and finished with a semi-gloss black powder coat for corrosion resistance. The steel construction provides the strength needed to withstand repeated high-load suspension impacts in demanding off-road conditions.

California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.