ICON Vehicle Dynamics 2020-Up Jeep Gladiator 2.5-Inch Lift Stage 7 Suspension System with Tubular UCA

The ICON Vehicle Dynamics Stage 7 Suspension System delivers a 2.5-inch lift for 2020-and-up Jeep Gladiator (JT) models equipped with the 3.6L V6 Pentastar engine, increasing front wheel travel by 33% and rear wheel travel by 23% over stock. The system is engineered around 35-inch tires and includes every component needed for a complete suspension overhaul: shocks, springs, links, track bars, sway bar hardware, and all installation hardware in one bolt-on package.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Built for Frequent, Heavy Off-Road Use

The Stage 7 system pairs ICON's 2.5 Aluminum Series remote-reservoir shocks front and rear with dual-rate front coil springs and a triple-rate rear coil spring kit. The dual-rate front springs and triple-rate rear springs work together to provide distinct droop, ride, and overload spring rates, so the Gladiator tracks predictably on the highway, absorbs trail chop at speed, and resists bottoming under load without requiring a spring swap between uses. The 2.5 Aluminum Series shocks use one-piece impact-extruded aluminum cylinders, which resist corrosion and maintain a consistent finish over the long term.

Geometry Corrected, Articulation Maximized

Tubular steel front fixed lower links and adjustable upper links correct caster angle after the lift, reducing the steering and handling compromises that a lift alone introduces. Tubular steel rear fixed upper links and adjustable lower links improve rear articulation and allow pinion angle adjustment to protect the driveline under flex. Front and rear adjustable track bars keep axle centering correct and improve articulation at both ends. Billet aluminum front sway bar links and a rear sway bar relocation kit complete the geometry package.

Validated Under Real Conditions

Every component in this system has been through ICON's "ICON 1K" validation process, which involves rigorous off-road testing to confirm tune, performance, strength, and durability before release. The front dual-rate coil springs carry a lifetime guarantee against sagging or breakage. The entire system installs with standard tools; no cutting or welding is required.

Features

• 2.5-inch lift height: designed for 35-inch tires; 37-inch tires require the optional ICON JT Extended Bump Stop Spacer Kit (Part #22071)
• 33% front / 23% rear wheel travel increase: over stock Gladiator suspension
• 2.5 Aluminum Series remote-reservoir shocks: front and rear, one-piece impact-extruded aluminum cylinders, fully serviceable
• Dual-rate front and triple-rate rear coil springs: lifetime guarantee against sagging or breakage on front springs
• Complete link and track bar set: tubular steel front and rear links, front and rear adjustable track bars for caster correction, pinion angle adjustment, and axle centering
• 100% bolt-on installation: all necessary hardware included; ships in multiple boxes

Specifications

Who This Is For and Isn't

The Stage 7 system suits 2020-and-up Jeep Gladiator owners running the 3.6L V6 Pentastar engine who wheel frequently and hard, want a geometry-corrected 2.5-inch lift with meaningful travel gains, and prefer a single complete kit over sourcing components individually. Gladiator Mojave trim owners can run this system with the addition of the 14mm misalignment spacer kit (Part #611070), sold separately.

This system does not fit Gladiator models with engines other than the 3.6L V6 Pentastar. It is not compatible with 37-inch tires without the separately sold ICON JT Extended Bump Stop Spacer Kit (Part #22071). The 14mm misalignment spacer kit required for Mojave trim is not included.

Common Questions

Does this system fit every Jeep Gladiator trim, including the Mojave?

The Stage 7 system fits 2020-and-up Jeep Gladiator models with the 3.6L V6 Pentastar engine. Gladiator Mojave trim requires an additional 14mm misalignment spacer kit (Part #611070), which is sold separately and not included in this kit.

Can I run 37-inch tires with this system?

The Stage 7 system is designed around 35-inch tires. Running 37-inch tires on a Gladiator with this system requires the separately sold ICON JT Extended Bump Stop Spacer Kit (Part #22071); without it, bump stop clearance is insufficient for 37-inch fitment.

Are the shocks in this system serviceable?

Yes. The 2.5 Aluminum Series shocks included in the Stage 7 system are fully serviceable, meaning internal components can be rebuilt or revalved rather than requiring full shock replacement after extended use.

Will my stock wheels fit after installing this system?

Yes. The Stage 7 system is confirmed compatible with OEM Gladiator wheels and tires. Buyers upgrading wheels at the same time can reference the recommended aftermarket sizes in the Specifications table above.

Why might the actual lift height differ from the stated 2.5 inches?

ICON's advertised lift heights for Gladiator systems are based on a typical build that includes added front-end weight from accessories such as a heavier bumper or winch. On a stock-weight Gladiator without those accessories, the measured lift height may be greater than 2.5 inches.