ICON Vehicle Dynamics 2020-Up Jeep Gladiator 2.5-Inch Lift Stage 5 Suspension System with Tubular UCA

The ICON Vehicle Dynamics Stage 5 Suspension System delivers a 2.5-inch lift for 2020-and-up Jeep Gladiator (JT), excluding the Mojave trim, and is built around frequent moderate off-road use, increasing front wheel travel by more than 30% and rear wheel travel by more than 20% over stock. The complete bolt-on kit includes ICON 2.0 Aluminum Series shocks, dual-rate front and triple-rate rear coil springs, tubular front and rear links, adjustable track bars, sway bar hardware, and all installation hardware.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

More Travel, Better Articulation

The 2.0 Aluminum Series shocks carry vehicle-specific valving tuned for the Gladiator's weight and suspension geometry, so the improvement in ride quality carries over to paved roads as well as trails. The front fixed lower and adjustable upper links correct caster angle at the lifted height and improve front-end articulation; the tubular rear upper and lower links do the same at the rear while allowing pinion angle adjustment to protect the driveline.

Springs Engineered for Load and Droop

The dual-rate front coil springs carry a lifetime guarantee against sagging or breakage. The triple-rate rear coil spring kit uses ICON-engineered droop, ride, and overload rates so the Gladiator's rear end responds predictably whether the bed is empty or loaded. Both spring sets are sized for a 35-inch tire; running a 37-inch tire requires the separately sold ICON Jeep JT Extended Bump Stop Spacer Kit (PN 22071).

Alignment and Sway Bar Hardware Included

Front and rear adjustable track bars are included to restore proper axle centering after the lift, a step many competing kits leave to the buyer. Billet aluminum front sway bar links and a rear sway bar relocation kit round out the geometry corrections so the Gladiator tracks and handles predictably on and off road. Every component in this system has been validated through ICON's "1K" test protocol under rigorous off-road conditions.

Features

• 2.5-inch lift height: designed for a stock-weight Gladiator JT; diesel models typically net approximately 1.75 inches of front lift due to added engine weight
• 2.0 Aluminum Series shocks: vehicle-specific valving front and rear, fully serviceable
• Dual-rate front / triple-rate rear coil springs: lifetime guarantee against sagging or breakage on the front springs
• Tubular steel links front and rear: fixed lower and adjustable upper at the front; fixed upper and adjustable lower at the rear
• Front and rear adjustable track bars: included for proper axle alignment at lifted height
• 100% bolt-on system: all necessary hardware included; ships in multiple boxes

Specifications

Who This Is For and Isn't

This Stage 5 system suits 2020-and-up Jeep Gladiator owners who wheel frequently on moderate off-road terrain and want a complete, bolt-on lift that addresses geometry, articulation, and ride quality in a single purchase, particularly those planning to run 35-inch tires.

This system does not fit the Gladiator Mojave trim. Running 37-inch tires requires the separately sold ICON Jeep JT Extended Bump Stop Spacer Kit (PN 22071), which is not included. Lift height on diesel-powered Gladiators will be approximately 1.75 inches at the front rather than the stated 2.5 inches due to the greater engine weight. California residents: this product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm (Proposition 65).

Common Questions

Does this system fit the Jeep Gladiator Mojave?

The ICON Stage 5 Suspension System for the 2020-and-up Jeep Gladiator does not fit the Mojave trim. It is designed for all other Gladiator JT configurations from model year 2020 onward.

What tire size is this system designed for, and can I run 37-inch tires?

The ICON Stage 5 Gladiator system is designed around a 35×12.50-inch tire with OEM or compatible aftermarket wheels. Running a 37×12.50-inch tire is possible but requires the separately sold ICON Jeep JT Extended Bump Stop Spacer Kit (PN 22071), which is not included in this kit.

Will the lift height be exactly 2.5 inches on my Gladiator?

The ICON Stage 5 system's 2.5-inch lift height is based on a stock-weight Gladiator build that typically includes accessories such as a heavier front bumper and winch. On a stock-weight vehicle without those additions, lift may exceed 2.5 inches. Diesel-powered Gladiators typically net approximately 1.75 inches of front lift due to the greater weight of the diesel engine.

Are the shocks in this system serviceable?

Yes. The 2.0 Aluminum Series shocks included in the ICON Stage 5 Gladiator system are fully serviceable, meaning internal components can be rebuilt or revalved rather than requiring full shock replacement.

What is included in this system, and is anything sold separately?

The ICON Stage 5 system includes front and rear 2.0 Aluminum Series shocks, dual-rate front coil springs, triple-rate rear coil springs, tubular front and rear links, billet front sway bar links, a rear sway bar relocation kit, front and rear adjustable track bars, and all installation hardware. The optional 37-inch tire bump stop spacer kit (PN 22071) and hydraulic bump stop kits are sold separately.