ICON Vehicle Dynamics 2.0 Aluminum Series Universal Steering Stabilizer

The ICON Vehicle Dynamics 2.0 Aluminum Series Universal Steering Stabilizer is a single-unit, nitrogen-charged monotube shock absorber designed for steering stabilizer applications where a universal mounting solution is acceptable. It is not application-specific and requires custom fabrication to mount to a vehicle. Extended length is 22.70 inches, compressed length is 14.25 inches, and shaft travel is 8.45 inches. Upper and lower eyelets are sized for 1.5-inch tab width and a 0.5-inch diameter bolt.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Consistent Damping Across Conditions

The 2.0 Aluminum Series stabilizer uses premium-grade 5WT shock oil to maintain consistent suspension damping across a wide temperature range. Whether driving on pavement or rough off-road terrain, the oil's viscosity characteristics help the shock deliver predictable resistance rather than fading or spiking as temperatures change. The nitrogen-charged monotube design eliminates oil aeration that can cause damping inconsistency under repeated cycling.

Built to Last and Be Serviced

The shock body and reservoir tubing are constructed from 6063 anodized aluminum, which dissipates heat efficiently and resists corrosion without adding unnecessary weight. The 5/8-inch chrome-plated hardened steel shaft resists pitting and surface corrosion at the seal interface, extending seal life. The rod end, top cap, and internals are 6061 aluminum. Every unit is 100% rebuildable and 100% revalveable, meaning worn internals or valving that no longer suits a build can be serviced rather than replaced outright.

Features

• Nitrogen-charged monotube design: eliminates oil aeration for consistent damping
• 5WT shock oil: maintains damping performance across a wide temperature range
• One-piece linear/digressive piston: vehicle-specific valving for on- and off-road performance
• 5/8" chrome-plated hardened steel shaft: resists corrosion and pitting at the seal
• 6063 anodized aluminum body: heat dissipation, corrosion resistance, and reduced weight
• 100% rebuildable and revalveable: serviceable internals extend the usable life of the unit

Specifications

Who This Is For and Isn't

The ICON 2.0 Aluminum Series Universal Steering Stabilizer suits builders and fabricators who need a high-quality monotube steering stabilizer and have the capability to fabricate or source custom mounting brackets for their specific vehicle. It is appropriate for single-stabilizer setups where lower nitrogen pressure is the correct specification.

This stabilizer is not a direct bolt-on replacement for any specific vehicle; mounting requires custom fabrication. It is not intended for dual opposing stabilizer applications. For those setups, ICON offers part number 36511, which is tuned to higher nitrogen pressure for dual use.

Common Questions

Does this steering stabilizer fit my specific truck or SUV directly?

The ICON 2.0 Aluminum Series Universal Steering Stabilizer is not application-specific. It does not include vehicle-specific brackets or hardware, and mounting to any particular vehicle requires custom fabrication. Buyers should confirm their ability to fabricate or source appropriate mounts before purchasing.

What are the mounting dimensions for this stabilizer?

The upper and lower eyelets on this stabilizer are sized for 1.5-inch width between tabs and a 0.5-inch diameter bolt. Extended length is 22.70 inches and compressed length is 14.25 inches, giving 8.45 inches of shaft travel. These dimensions should be confirmed against the intended mounting location before ordering.

Can this unit be used in a dual opposing steering stabilizer setup?

No. The ICON 2.0 Aluminum Series Universal Steering Stabilizer (SKU 29511) is tuned to a lower nitrogen pressure intended for single stabilizer applications. For dual opposing setups, ICON offers a separate unit under part number 36511, which is valved and pressurized appropriately for that configuration.

Is this steering stabilizer rebuildable if it wears out?

Yes. The ICON 2.0 Aluminum Series steering stabilizer is 100% rebuildable and 100% revalveable. Worn seals, oil, or valving can be serviced rather than requiring full unit replacement, which extends the usable life of the shock and allows the valving to be adjusted if the vehicle's setup changes.