ICON Vehicle Dynamics 1991-1997 Toyota Land Cruiser 80 Series 3-Inch Lift Extended Brake Line Kit

The ICON Vehicle Dynamics Extended Brake Line Kit provides extended-length front and rear stainless steel braided brake lines engineered specifically for 1991–1997 Toyota Land Cruiser 80 Series vehicles running a 3-inch suspension lift. The kit addresses the single most common brake-system failure point on a lifted 80 Series: factory lines pulled to their limit at full droop.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Clearance Where It Counts

When a Land Cruiser 80 Series is lifted 3 inches, the suspension cycles through a greater range of travel than the factory brake lines were sized to handle. At full droop, a stock-length line can stretch taut, crack at the fitting, or pull free entirely, a failure that is invisible until braking is needed most. These extended lines provide the additional slack required to follow the suspension through its full range without tension, keeping the hydraulic circuit intact across every articulation.

Stainless Steel Braided Construction

Each line is built with a stainless steel braided hose wrapped in a clear protective outer sheathing. The braid resists abrasion from trail debris and undercarriage contact, while the clear sheathing allows visual inspection of the hose beneath without removing the line. Together they are suited to the mud, rock, and water exposure common to 80 Series off-road use.

Specifications

Who This Is For and Isn't

This kit is for owners of 1991–1997 Toyota Land Cruiser 80 Series vehicles that have been lifted exactly 3 inches and need brake lines long enough to handle the increased suspension travel safely.

This kit does not fit Land Cruiser 80 Series vehicles running a lift height other than 3 inches, and it is not designed for any other Toyota model or generation. It does not include brake fluid, fittings, or any other brake-system hardware beyond the extended lines themselves.

⚠ California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.

Common Questions

Does this kit cover both the front and rear brake lines?

Yes. The ICON Extended Brake Line Kit includes extended-length lines for both the front and rear of the 1991–1997 Toyota Land Cruiser 80 Series, so both axles are addressed in a single purchase.

Will these lines work with a lift other than 3 inches?

No. The ICON Extended Brake Line Kit for the Land Cruiser 80 Series is engineered specifically for a 3-inch suspension lift. A different lift height requires a different line length; using this kit on a non-3-inch lift is outside its intended application.

What is the outer sheathing for?

The clear outer sheathing on each brake line protects the stainless steel braid from abrasion caused by trail debris and undercarriage contact. Because the sheathing is clear, the condition of the hose beneath can be checked visually without removing the line from the vehicle.