ICON V.S. 2.5 Series Front Coilover Kit with Remote Reservoir and CDCV for 2009-2013 Ford F-150 2WD

The ICON Vehicle Dynamics V.S. 2.5 Series Front Coilover Kit with Remote Reservoir and CDCV is a bolt-on front suspension upgrade for 2009–2013 Ford F-150 2WD trucks, delivering 1.75–2.63 inches of adjustable lift height through a 2.5-inch shock body with vehicle-specific valving. The kit ships as SKU 91805C and fits the 2WD F-150 only.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Larger Shock Body, More Damping Headroom

The 2.5-inch shock body and increased piston area over stock components give the coilover more surface area to work with on every compression and rebound stroke. For a 2WD F-150 driven on mixed pavement and dirt, that translates to more consistent damping as terrain changes, because the shock is not working at the edge of its capacity on rough roads the way a smaller-diameter unit can be. The 7/8-inch diameter shaft and FK rod end bearings are rated for extended longevity and minimal deflection, so the geometry the system is tuned for stays accurate over time.

Remote Reservoir Keeps Temperatures in Check

During sustained off-road use (repeated whoops, washboard, or loaded towing on rough roads), shock fluid heats up and damping consistency drops. The remote reservoir on this kit increases fluid volume and separation from the main shock body, extending the duration of consistent damping and keeping operating temperatures lower during heavy use. The result is that the 1.75–2.63 inch lift range and the vehicle-specific valving continue to perform as tuned rather than fading mid-run.

External Tuning Without Disassembly

The included ICON CDC Valve (CDCV) adds 10 external adjustment positions spanning soft to hard, accessible without removing the shock from the vehicle. Drivers who run the F-150 on the highway during the week and on dirt on weekends can dial the ride character to match the use rather than accepting a single fixed tune. ICON's vehicle-specific valving provides the baseline sport-tuned feel; the CDCV lets the owner refine from there.

Features

• Vehicle-specific valving: sport-tuned damping calibrated for the 2009–2013 F-150 2WD platform
• 2.5-inch shock body: larger diameter and increased piston area versus stock for improved damping ability
• ICON CDC Valve (CDCV): 10-position external adjustment from soft to hard, no disassembly required
• Remote reservoir: increases fluid volume and lowers operating temperature during extended use
• ICON-engineered Eibach springs: 6061 aircraft-grade aluminum CNC-machined components throughout
• 100% bolt-on installation: no cutting or welding required

Specifications

Who This Is For and Isn't

This kit suits owners of 2009–2013 Ford F-150 2WD trucks who want a front lift of 1.75–2.63 inches, improved damping over stock, and the ability to run larger aftermarket wheels and tires. It is well matched to drivers who use the truck across a mix of pavement and off-road terrain and want external damping adjustment without pulling the shocks.

This kit does not fit 4WD F-150 variants, F-150 model years outside 2009–2013, or any other vehicle. It covers the front suspension only; rear performance will remain stock unless paired with compatible ICON rear shocks. Tires larger than 33x11.50 inches may require fender trimming and additional modifications.

Common Questions

What years and configurations of the Ford F-150 does this coilover kit fit?

This ICON V.S. 2.5 Series front coilover kit fits 2009–2013 Ford F-150 trucks in 2WD configuration only. It does not fit 4WD variants or F-150 model years before 2009 or after 2013.

How much lift does this kit provide?

The ICON V.S. 2.5 Series front coilover kit is adjustable for 1.75 to 2.63 inches of front lift height. Adjustment is made at the coilover perch; the range allows the owner to dial in the ride height that works with their chosen wheel and tire combination.

What does the CDC Valve do and how is it adjusted?

The ICON CDC Valve (CDCV) included with this kit provides 10 positions of external damping adjustment spanning soft to hard. Adjustment is made from outside the shock body without removing the coilover from the vehicle, so the driver can change the tune to match road conditions or load without tools-intensive disassembly.

Does installation require cutting or welding?

No. The ICON V.S. 2.5 Series front coilover kit for the 2009–2013 Ford F-150 2WD is 100% bolt-on. No cutting or welding is required for installation.

What tire and wheel sizes are compatible with this lift kit?

Factory wheels and tires are compatible with this coilover kit. For aftermarket fitments, ICON recommends 17x8.5 wheels with 5.00-inch backspace and 6mm offset, 18x9 with 5.25-inch backspace and 6mm offset, or 20x9 with 5.625-inch backspace and 16mm offset. A 33x11.50-inch tire is the recommended aftermarket size; larger tires may fit but will require fender trimming and modifications.

Does this kit include rear shocks?

No. This kit covers the front suspension only. Pairing these front coilovers with ICON 2.0 Aluminum Series or 2.5 Series rear shocks will balance vehicle control front to rear, but those rear shocks are sold separately.

Is there a California Proposition 65 warning for this product?

Yes. This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm. This warning applies to California residents under Proposition 65.