ICON V.S. 2.5 Series Front Coilover Kit Remote Reservoir CDCV 2014 Ford F-150 4WD

The ICON V.S. 2.5 Series Front Coilover Kit with Remote Reservoir and CDCV is a bolt-on front suspension upgrade for the 2014 Ford F-150 4WD, delivering 1.75–2.63 inches of adjustable lift height and vehicle-specific valving tuned for both on-road comfort and off-road control. The kit ships as a complete front coilover assembly; a compatible rear shock upgrade is available separately to balance vehicle control front to rear.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Larger Shock Body, More Damping Range

The 2.5-inch shock body provides greater piston area than the factory unit, which translates directly into a wider damping range. That wider range means the coilover can manage both the small, rapid inputs of highway driving and the larger, slower compressions of trail use without being tuned as a compromise between the two. ICON's vehicle-specific valving calibrates that range to the F-150's weight and geometry rather than applying a generic tune.

Remote Reservoir Keeps Damping Consistent Under Load

The external remote reservoir increases fluid volume, which extends the period before heat-induced fade degrades damping consistency during sustained off-road use. A Continuous Damping Control Valve (CDCV) maintains controlled damping characteristics throughout the shock's travel. The result is more predictable handling on extended runs where the front suspension is working hard: washboard roads, repeated water crossings, or loaded towing on rough surfaces.

Adjustable Lift Without Cutting or Welding

The 1.75–2.63-inch lift range is dialed in by adjusting coilover preload, allowing the owner to set ride height to match a specific wheel-and-tire combination or terrain preference without permanent modifications. ICON-engineered Eibach springs, a high-strength alloy CNC-machined lower bar pin, and FK rod end bearings are included in the assembly. All mounting points are bolt-on to the 2014 F-150 4WD chassis, with no cutting or welding required for installation.

Features

• Adjustable lift height: 1.75–2.63 inches of ride-height adjustability via coilover preload
• 2.5-inch shock body: larger piston area than stock for improved damping ability
• Remote reservoir with CDCV: extended damping consistency and cooler operating temperatures under heavy use
• ICON-engineered Eibach springs: vehicle-specific spring rate matched to the 2014 F-150 4WD
• 6061 aircraft-grade aluminum CNC components: corrosion-resistant CAD-plated shock body, 7/8-inch diameter shaft
• 100% bolt-on installation: no cutting or welding required

Specifications

Who This Is For and Isn't

This coilover kit suits the owner of a 2014 Ford F-150 4WD who wants 1.75–2.63 inches of front lift, improved off-road damping, and the ability to run larger wheel-and-tire combinations without permanent chassis modifications. OEM wheels and tires are compatible. ICON Alloys 17x8.5, 18x9, and 20x9 fitments are noted as recommended aftermarket options, and 33x11.50-inch tires are the recommended aftermarket tire size.

This kit does not fit any Ford F-150 model year other than 2014, and it does not fit two-wheel-drive (2WD) F-150 variants. It is not compatible with F-150 models equipped with CNG or LPG fueled engines. Lift heights above 2 inches over stock may require aftermarket front upper control arms to maintain proper alignment, and those are not included in this kit. Tires larger than 33x11.50 inches may require fender trimming or other modifications.

Common Questions

Does this kit fit a 2WD Ford F-150?

No. The ICON V.S. 2.5 Series Front Coilover Kit (SKU 91810C) is compatible with the 2014 Ford F-150 in 4WD configuration only. Two-wheel-drive F-150 variants are not supported by this kit.

Will factory wheels and tires still fit after installation?

Yes. OEM wheels and tires are compatible with this coilover kit. The recommended aftermarket tire size is 33x11.50 inches; tires larger than that may require fender trimming or other modifications to clear properly.

Do I need to cut or weld anything to install this kit?

No cutting or welding is required. The ICON V.S. 2.5 Series Front Coilover Kit is a 100% bolt-on assembly designed to mount directly to the 2014 Ford F-150 4WD chassis using existing attachment points.

Will I need new upper control arms?

At lift heights above 2 inches over stock, aftermarket front upper control arms may be required to maintain proper alignment. Upper control arms are not included in this kit and are sold separately. At lift settings of 2 inches or below, no control arm requirement is noted for this kit.

Does this kit include rear shocks?

No. This kit covers the front suspension only. Compatible rear shock options, including ICON 2.0 Aluminum Series and 2.5 Series rear shocks, can be paired with this front kit to balance vehicle control front to rear and are sold separately.