ICON V.S. 2.5 Series Coilover Kit for 2005-2023 Toyota Tacoma, Pro Comp 6" Lift, Remote Reservoir with CDCV, 700 lbs/in, Pair

The ICON Vehicle Dynamics V.S. 2.5 Series Coilover Kit is a front suspension upgrade sold as a pair for 2005–2023 Toyota Tacoma trucks running a Pro Comp 6" subframe lift. The 2.5" shock body, remote reservoir, and ICON Compression Damping Control Valve (CDCV) are engineered specifically for this application, and the 700 lbs/in coil springs are sized for Tacomas carrying added front-end weight from aftermarket bumpers or winches.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Built Around the 2.5" Shock Body

The larger 2.5" shock body and increased piston area over stock components allow for greater oil volume and more precise damping control. Vehicle-specific shock length and valving are tuned for the Tacoma's geometry at the Pro Comp 6" lift height, which means the coilover works with the suspension's actual travel arc rather than against it. The result is improved ride quality and suspension performance both on pavement and off.

Remote Reservoir and CDCV Damping

Remote reservoirs increase shock oil volume and heat-dissipation surface area, which helps resist overheating and cavitation during extended off-road use. Damper fade from heat buildup is a real problem on long desert runs or repeated rock-crawling cycles; the remote reservoir directly addresses that failure mode. ICON's exclusive CDCV provides 10 settings of external compression damping adjustment, letting the driver dial in a tune for street driving, slow technical terrain, or high-speed desert running without removing the shock.

700 lbs/in Springs for Heavier Front Ends

The 700 lbs/in ICON-engineered coil springs are stiffer than a standard replacement rate and are recommended specifically for Tacomas with additional weight added to the front end. An aftermarket steel bumper or a winch shifts the truck's front-end load significantly; a spring rate matched to that weight keeps ride height stable and prevents the nose from sitting low under load. Height adjustability is retained, allowing fine-tuning of ride height or clearance for larger wheel and tire combinations.

Features

• 2.5" shock body: larger piston area over stock for increased travel and damping capacity
• CDCV with 10 settings: external compression damping adjustment without removing the shock
• Remote reservoir: increased oil volume and heat dissipation to resist fade under hard use
• 700 lbs/in coil springs: ICON-engineered rate for front-end-heavy Tacoma builds
• 6061 aircraft-grade aluminum components: CNC machined; CAD-plated shock bodies with 7/8" diameter shafts
• FK rod end bearings: extended longevity and minimal deflection
• Fully rebuildable and re-tunable

Specifications

Who This Is For and Isn't

This coilover kit is designed for 2005–2023 Toyota Tacoma 4WD owners running a Pro Comp 6" subframe lift who want improved front suspension performance, external damping adjustment, and a spring rate suited to a front-end-heavy build with an aftermarket bumper or winch. It is also compatible with ICON 2.0 or 2.5 Aluminum Series rear shocks for a balanced front-to-rear upgrade.

This kit does not fit 2WD Tacoma models with 5 lug wheel studs. The 700 lbs/in spring rate is not recommended for stock-weight front ends. ADAS (Advanced Driver Assistance Systems) recalibration is required after installation. California residents: this product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm (Proposition 65).

Common Questions

Does this kit fit a 2WD Tacoma?

The ICON V.S. 2.5 Series Coilover Kit for the 2005–2023 Toyota Tacoma does not fit 2WD Tacoma models with 5 lug wheel studs. It is designed for 4WD applications only.

Is a specific lift kit required for this coilover to fit?

The coilover length is optimized for the Pro Comp 6" subframe lift kit. The application notes state it may also be compatible with 6" subframe lifts from other manufacturers. A different lift height or a non-subframe lift is not supported by this kit.

Why is the 700 lbs/in spring rate specified, and is it right for a stock-weight truck?

ICON recommends the 700 lbs/in spring rate only for Tacomas with additional weight added to the front end, such as an aftermarket steel bumper or a winch. For a stock-weight front end, this rate is not recommended; a lower spring rate coilover kit would be more appropriate.

What does the CDCV do, and how is it adjusted?

The Compression Damping Control Valve (CDCV) controls fluid flow under compression and provides 10 settings of external adjustment. Turning the external knob changes the damping tune without removing the shock, allowing the driver to switch between a compliant street setting and a firmer off-road setting as conditions change.

Will ADAS features need to be recalibrated after installation?

Yes. Installing this coilover kit changes the vehicle's ride height and suspension geometry, which requires recalibration of Advanced Driver Assistance Systems (ADAS) after installation. This applies to any Tacoma equipped with ADAS features such as lane-departure warning or automatic emergency braking.