ICON Stage 3 Suspension System for 1995.5-2004 Toyota Tacoma 0-3" Lift

The ICON Stage 3 Suspension System for 1995.5–2004 Toyota Tacoma (4WD and PreRunner) provides 0–3 inches of adjustable lift through a matched set of 2.5-inch remote reservoir coilovers up front and 2.0 Aluminum Series remote reservoir shocks with an add-a-leaf kit in the rear, all as a 100% bolt-on system requiring no drilling, cutting, or welding.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Matched Front-to-Rear Tuning

The front 2.5-inch VS remote reservoir coilovers are valved specifically for the Tacoma's weight and geometry, and paired with ICON-engineered Eibach coil springs. The remote reservoir extends the shock's cooling capacity during sustained off-road use, reducing fade when the terrain demands repeated, hard compressions. The rear 2.0 Aluminum Series remote reservoir shocks carry vehicle-specific valving chosen to balance the truck's damping response front to rear, so the system behaves as a unit rather than two independent upgrades.

Adjustable Lift, Retained OEM Compatibility

Coilover height adjusts across the full 0–3-inch lift range without swapping springs, letting the owner dial in ride height as wheel and tire combinations change. OEM wheels and tires fit without modification. ICON's application notes confirm that coilover heights shown are calibrated for a stock-equipped vehicle; heavier-equipped builds should consider the available 700 lb/in expedition coil spring (sold separately, Application Note #47).

Hardware Built for Longevity

Coilover bodies are CAD-plated for corrosion resistance and fitted with a 7/8-inch hardened chrome shaft. Rear shocks use a 5/8-inch polished chrome-plated steel shaft. Structural components are CNC-machined from 6061 aircraft-grade aluminum. FK rod end bearings are specified for extended service life and minimal deflection under load. All shocks are fully serviceable (Application Note #55).

Features

• Front suspension: 2.5-inch VS remote reservoir coilovers with ICON-engineered Eibach coil springs (part 58710)
• Rear suspension: 2.0 Aluminum Series remote reservoir shocks (part 56502R, qty 2) and 1.5-inch add-a-leaf kit (part 51100)
• Lift range: 0–3 inches, height-adjustable at the coilover without spring swap
• Construction: 6061 aircraft-grade aluminum CNC components; CAD-plated coilover body; FK rod end bearings
• Installation: 100% bolt-on; no drilling, cutting, or welding required
• Serviceability: All shocks are fully serviceable

Specifications

Who This Is For and Isn't

This system suits 1995.5–2004 Toyota Tacoma owners running a 4WD or PreRunner configuration who want 0–3 inches of adjustable lift, improved wheel travel, and a fully bolt-on front and rear suspension upgrade for mixed on-road and off-road use.

This system does not fit 2WD Tacoma models with 5 wheel lug studs (Application Note #185). Coilover height references assume a stock-equipped vehicle; heavily loaded or accessory-heavy builds may require the separately available 700 lb/in expedition coil spring. A bump stop spacer kit for additional thread clearance is also sold separately.

Common Questions

Will this system fit a 2WD Tacoma?

The ICON Stage 3 system for 1995.5–2004 Tacoma does not fit 2WD Tacoma models equipped with 5 wheel lug studs. It is designed for 4WD and PreRunner configurations only (Application Note #185).

Do OEM wheels and tires fit after installation?

Yes. The ICON Stage 3 system is confirmed compatible with OEM wheels and tires. ICON also lists recommended aftermarket fitments: 17x8.5-inch wheels with 4.75-inch backspace, 18x9-inch with 5.00-inch backspace, and 20x9-inch with 5.00-inch backspace. Tires up to 33x11.50 inches are noted as fitting; larger tires may require fender trimming.

What is included in the Stage 3 kit?

The Stage 3 system includes one 2.5-inch VS remote reservoir coilover kit for the front (part 58710), two 2.0 Aluminum Series remote reservoir rear shocks (part 56502R), and one 1.5-inch add-a-leaf kit for the rear (part 51100). Accessory items such as the spanner wrench, bump stop spacer kit, and expedition coil spring are sold separately.

Does installation require cutting, drilling, or welding?

No. The ICON Stage 3 system for 1995.5–2004 Toyota Tacoma is a 100% bolt-on system. No cutting, drilling, or welding is required for installation on compatible 4WD and PreRunner vehicles.

Are the shocks serviceable after installation?

Yes. All shocks in the ICON Stage 3 system are fully serviceable (Application Note #55), which supports long-term ownership and the ability to rebuild or revalve rather than replace the units outright.

California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.