ICON Stage 1 Suspension System for 2014-2026 Ram 2500 4WD Diesel 2.5" Lift
ICON Stage 1 Suspension System for 2014-2026 Ram 2500 4WD Diesel 2.5" Lift
Couldn't load pickup availability
The ICON Vehicle Dynamics Stage 1 Suspension System for 2014–2026 Ram 2500 4WD Diesel (coil spring rear) delivers 2.5 inches of front lift on most Ram 2500 submodels using a matched set of dual-rate front coil springs, an adjustable front track bar, and ICON 2.0 Aluminum Series shocks at all four corners. This system fits 4WD, diesel-engine Ram 2500 trucks equipped with rear coil springs only; it is not compatible with rear factory air ride.
Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.
Matched Springs and Shocks, Tuned Together
ICON engineers the dual-rate front coil springs and 2.0 Aluminum Series shocks as a single package, calibrating spring rate and damping together rather than mixing components from separate sources. That matched tuning means the shocks are not working against an ill-suited spring curve. The result is more consistent wheel control on washboard dirt roads and construction-site terrain without sacrificing the composed highway ride a daily-driven truck needs.
Adjustable Track Bar With PTFE Spherical Bearings
Lifting a solid-front-axle truck shifts the front axle laterally off center. The included adjustable front track bar lets the installer re-center the axle under the truck after the lift is set, correcting the geometry the factory bar can no longer address. PTFE-lined spherical bearings replace the factory rubber bushings at the track bar ends, eliminating the bushing deflection that allows the axle to wander under load and reducing body roll compared to stock.
No Driveshaft Modifications, No Towing Capacity Change
The Stage 1 system increases wheel travel and ride quality without requiring driveshaft modifications or reducing the truck's rated towing capacity. OEM wheels and tires fit the lifted geometry. The recommended aftermarket tire size is 35 × 12.50 inches; larger tires may fit but will require fender trimming. The 2.0 Series shocks are fully serviceable.
Features
- Dual-rate front coil springs: ICON-engineered for diesel Ram 2500, matched to 2.0 Series shock tuning
- 2.0 Aluminum Series shocks (×4): front and rear, fully serviceable
- Adjustable front track bar: re-centers front axle after lift; PTFE-lined spherical bearings replace factory rubber joints
- Necessary bracketry and hardware included: no separate hardware kit required
- No driveshaft modifications needed: bolt-on installation within stated fitment
- California Prop 65 Warning: this product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm
Specifications
| Specification | Detail |
|---|---|
| SKU | K212541 |
| Lift Height (front) | 2.5 in (most Ram 2500 submodels); 0.5 in on Ram 2500 Rebel |
| Shock Series | ICON 2.0 Aluminum Series (VS IR), front and rear |
| Vehicle Fitment | 2014–2026 Ram 2500 4WD, Diesel, Coil Spring Rear |
| Rear Lift Compatibility | Compatible with 0–1 in of rear lift |
| Shipping Weight | 84 lb |
| Recommended Tires | 35 × 12.50 in (larger may require fender trimming) |
| Recommended Aftermarket Wheels | ICON Alloys 17×8.5 in / 5.25 in BS / 13 mm offset; 18×9 in / 5.50 in BS / 12 mm offset; 20×9 in / 5.50 in BS / 12 mm offset |
| OEM Wheel Fitment | Yes |
| Components Included | Front dual-rate spring kit (×1), adjustable front track bar kit (×1), front 2.0 VS IR shocks (×2), rear 2.0 VS IR shocks (×2), necessary bracketry and hardware |
Who This Is For and Isn't
This system suits owners of 2014–2026 Ram 2500 4WD trucks with diesel engines and rear coil springs who want 2.5 inches of front lift with improved on- and off-road ride quality, reduced body roll, and the ability to run up to 35-inch tires without modifying the driveshaft or giving up towing capacity.
This system does not fit Ram 2500 trucks with 2WD drivetrains, gasoline engines, or rear factory air ride suspension. It provides only 0.5 inches of front lift on the Ram 2500 Rebel. Advanced Driver Assistance Systems (ADAS) require recalibration after installation; that recalibration is not included.
Common Questions
Does this system fit a Ram 2500 with a gasoline engine?
No. The ICON Stage 1 System for 2014–2026 Ram 2500 is engineered and rated for diesel engines only. A Ram 2500 with a gasoline engine requires a different system; this one should not be used on gas-powered trucks.
Will this kit work on a Ram 2500 with rear air ride suspension?
No. The ICON Stage 1 System for 2014–2026 Ram 2500 is compatible only with trucks equipped with rear coil springs. Trucks with factory rear air ride suspension are not supported by this kit.
How much front lift does this system provide on the Ram 2500 Rebel?
The ICON Stage 1 System provides 2.5 inches of front lift on most Ram 2500 submodels. On the Ram 2500 Rebel specifically, front lift is 0.5 inches due to differences in the Rebel's factory suspension geometry.
Does installing this system require driveshaft modifications?
No driveshaft modifications are needed for the ICON Stage 1 System on the 2014–2026 Ram 2500 4WD within the stated fitment. The system is designed to bolt on without changes to the factory driveshaft.
Is ADAS recalibration required after installation?
Yes. Installing the ICON Stage 1 System on a Ram 2500 equipped with Advanced Driver Assistance Systems requires ADAS recalibration after the lift is complete. That recalibration is not part of this kit and must be performed separately.
What is the largest tire this system will clear without modifications?
The ICON Stage 1 System for 2014–2026 Ram 2500 is recommended for tires up to 35 × 12.50 inches. Larger tires may physically fit but will require fender trimming and additional modifications not covered by this kit.
Share
