ICON Alloys Raider 17x8.5 6x135 +6mm Satin Black Wheel

The ICON Alloys Raider is a 17×8.5 aluminum alloy wheel with a 6×135 bolt pattern, 6mm offset, and 5-inch backspace, rated to carry 2,750 lb per wheel. Its 6-spoke design with vented rock ring is engineered around caliper clearance, suspension travel, and scrub-radius reduction rather than appearance alone. This listing is for one Satin Black wheel; the Raider is also available from ICON Alloys in Satin Brass and Titanium finishes.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Engineered Dimensions, Not Just Styled Ones

The Raider's 6mm offset and 5-inch backspace were developed specifically to reduce scrub radius, the geometry variable that most directly affects steering feel and straight-line stability under braking. A wheel that puts the tire in the right lateral position relative to the steering axis handles more predictably on pavement and holds a line better on loose terrain. Buyers who have already upgraded to an ICON Vehicle Dynamics suspension system will find the Raider's dimensions were developed with that hardware in mind.

Caliper Clearance and Suspension Travel

The spoke geometry and inner barrel profile are shaped to maximize clearance between the wheel and brake calipers, which matters most when running larger aftermarket brakes or when suspension compresses fully under load. Unobstructed suspension travel means the wheel does not become the limiting factor in how far the axle can move. That matters on trucks that see washboard roads or rock crawling, where full droop and full compression both occur in quick succession.

2,750 lb Load Rating

Each Raider has been strength-tested to a 2,750 lb load rating. On a truck running four wheels, that figure represents the per-wheel capacity the structure has been verified to handle. Aluminum alloy construction keeps unsprung and rotating mass lower than a comparable steel wheel, which reduces the inertia the suspension has to manage with every wheel movement. That is a measurable benefit both on-road and off.

Features

• 6-spoke design with vented rock ring: modern profile with structural venting at the outer barrel
• Application-specific offset and backspace: 6mm offset and 5-inch backspace engineered to reduce scrub radius
• Caliper-clearance geometry: spoke and barrel profile shaped to maximize brake caliper clearance
• 2,750 lb load rating: strength-tested per wheel
• Aluminum alloy construction: reduces unsprung and rotating mass versus steel

Specifications

California residents: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm (Proposition 65).

Professional mounting and balancing of an appropriately sized tire prior to installation onto the vehicle is recommended.

Who This Is For and Isn't

The ICON Alloys Raider in this listing suits trucks and SUVs running a 6×135 bolt pattern, the bolt pattern common to Ford F-150 and related platforms, where the buyer wants a 17×8.5 wheel with a 6mm offset and 5-inch backspace. It pairs directly with ICON Vehicle Dynamics suspension systems, whose geometry the Raider's dimensions were developed alongside.

This listing is for one wheel only, not a set of four. Vehicles with a different bolt pattern, or builds requiring a different offset or backspace than 6mm/5 inches, will need a different Raider configuration. Tire, lug nuts, and TPMS sensors are not included.

Common Questions

What bolt pattern does this wheel fit?

The ICON Alloys Raider in this listing has a 6×135 bolt pattern. Buyers should confirm their vehicle's bolt pattern before ordering; this wheel will not fit vehicles with a different bolt pattern such as 6×139.7 or 6×5.5.

Is this listing for one wheel or a set of four?

This listing covers one ICON Alloys Raider wheel. Buyers who need a full set of four should add four units to their cart or contact TerrainVault to confirm availability.

Are lug nuts or TPMS sensors included?

Lug nuts and TPMS sensors are not included with the ICON Alloys Raider. Buyers should source hardware appropriate for their vehicle and verify compatibility with the wheel's seat type before installation.

Does this wheel require a lift kit?

The ICON Alloys Raider is designed to work with stock and lifted trucks. The 6mm offset and 5-inch backspace were developed alongside ICON Vehicle Dynamics suspension systems, but the wheel is not limited to lifted applications. Tire sizing and fender clearance should be confirmed for the specific vehicle and lift height.

What other finishes is the Raider available in?

The ICON Alloys Raider is available in Satin Black, Satin Brass, and Titanium finishes. Each finish is a separate listing; this page covers the Satin Black version in 17×8.5 with a 6×135 bolt pattern.