ICON Alloys Hammer PRO 17x8.5 5x150 +25mm Silver Machined Wheel

The ICON Alloys Hammer PRO is a 17×8.5 aluminum alloy wheel in a 5×150 bolt pattern with a +25mm offset and 5.75" backspace, finished in Silver Machined. It combines a patented InnerLock bead retention system with full DOT compliance, giving off-road drivers the low-pressure tire security of a traditional bead lock without the on-road legal restrictions or specialty tooling that bead locks require.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

InnerLock Bead Retention Without the Bead Lock Trade-Offs

Traditional bead lock wheels clamp the tire bead mechanically, which keeps the tire seated at low pressures but adds rotational mass, demands frequent maintenance, requires specialty tools, and is not street-legal. The Hammer PRO's InnerLock system uses hardened alloy retention pins sealed with SAE J1926 O-rings to hold the bead in place while remaining fully DOT compliant. The pins are removable, reusable, and replaceable, so tire changes stay straightforward and the system can be serviced without replacing the wheel. In independent lab testing to FMVSS No. 139 (modified to 10 psi), InnerLock exceeded the mechanical limits of the test machine at over 7,600 lbs of load without de-beading the tire.

HALO Wheel Armor Included

Every Hammer PRO ships with ICON's HALO Wheel Armor, a high-grade aluminum ring that protects the outer face from trail rash. The armor is segmented into 90° sections, so a single damaged quarter can be swapped out independently rather than replacing the entire ring. The segments are also available in different finishes, letting owners customize the look of the wheel after purchase.

Dimensions Engineered for Suspension Clearance

The Hammer PRO's offset and backspace dimensions are developed to reduce scrub radius and maximize caliper clearance, keeping steering response and suspension travel unaffected by the wheel change. The wheel carries a 3,650 lb load rating and is compatible with a wide variety of tires without shims or special tools. Professional mounting and balancing before installation is recommended.

Features

• Patented InnerLock technology (U.S. Patent No. 11,090,976): DOT-compliant bead retention using removable, reusable hardened alloy pins with SAE J1926 O-ring seals
• 3,650 lb load rating: strength-tested aluminum alloy construction
• Included HALO Wheel Armor: high-grade aluminum trail-rash protection, replaceable in 90° segments
• Corrosion-resistant pins: thermochemically treated high-strength alloy
• Caliper and suspension clearance: offset and backspace engineered to reduce scrub radius and preserve steering function
• No shims or specialty tools required: compatible with a wide variety of tires for standard mounting

Specifications

Who This Is For and Isn't

The Hammer PRO suits off-road and overland drivers on vehicles with a 5×150 bolt pattern who run low tire pressures on the trail and need a street-legal alternative to a traditional bead lock wheel. The InnerLock system works with a wide variety of tires without shims or specialty tools, making it practical for drivers who mount and dismount tires regularly.

This wheel will not fit vehicles with a different bolt pattern. Application Note #211 states the Hammer PRO may not be compatible with all TPMS sensors that use rigid valve stems; flexible rubber valve stems are recommended for InnerLock pin clearance when mounting tires. This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm (California Proposition 65 warning).

Common Questions

Is the Hammer PRO legal to drive on public roads?

Yes. Unlike traditional bead lock wheels, the Hammer PRO with InnerLock technology is fully DOT compliant, making it legal for on-road use. The bead retention system achieves low-pressure security through internal alloy pins rather than an external clamping ring, which is the design feature that keeps it street-legal.

Will the Hammer PRO work with my existing TPMS sensors?

The Hammer PRO may not be compatible with all TPMS sensors that use rigid valve stems. ICON's Application Note #211 recommends flexible rubber valve stems to ensure clearance for the InnerLock pins during tire mounting. Confirm your sensor's valve stem type before ordering.

What is included with the Hammer PRO?

Each Hammer PRO wheel includes ICON's HALO Wheel Armor, a high-grade aluminum ring that protects the wheel face from trail rash. The HALO Wheel Armor is segmented into 90° sections so individual damaged portions can be replaced without swapping the entire ring.

Can the InnerLock pins be replaced if they are damaged?

Yes. The hardened alloy InnerLock bead retention pins are designed to be removable, reusable, and replaceable. Each pin uses a SAE J1926 O-ring seal and is thermochemically treated for corrosion resistance, but individual pins can be serviced or swapped without replacing the Hammer PRO wheel itself.

Does the Hammer PRO require special tools or shims for tire mounting?

No specialty tools or shims are required. The Hammer PRO is compatible with a wide variety of tires using standard mounting equipment. ICON recommends professional mounting and balancing before the wheel is installed on the vehicle.