ICON Alloys Ford Bronco 3-Inch Lift Coilover Spacer Kit

The ICON Alloys Coilover Spacer Kit delivers 3 inches of front lift and up to 2.75 inches of rear lift on 2021–2026 Ford Bronco models (excluding Bronco Raptor and HOSS 3.0-equipped vehicles), using a combination of coil spring preload spacers and top-load shims machined from 6061 billet aluminum. Rear lift varies by suspension package: HOSS 2.0 Broncos gain 2 inches of rear lift; HOSS 1.0 Broncos gain up to 2.75 inches.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Geometry-Conscious Lift

Lifting a Bronco without accounting for its front-end geometry can overextend or bind the ball joints, accelerating wear and creating a handling liability on the trail. The ICON Alloys Coilover Spacer Kit is designed specifically around the Bronco's geometry so that the added ride height does not push ball joints beyond their safe range of motion. The result is a lifted stance that does not trade long-term drivetrain health for clearance.

CNC-Machined Aluminum Construction

Every spacer and shim in the kit is CNC machined from 6061 billet aluminum and finished with a black anodized coating. The anodized surface resists corrosion in the mud, salt, and water exposure that Bronco owners encounter on and off-road, so the components maintain their integrity over years of use rather than corroding in place.

Clearance for Larger Tires

The additional ride height keeps oversized tires clear of fender interference. Without the Sasquatch Package, 35x12.50-inch tires are compatible when used with high-clearance crash bars (ICON part number 42000). With the Sasquatch Package, 37x12.50-inch tires may be run, though fender trimming and modifications may be required.

Features

• Front lift: 3 inches over stock ride height
• Rear lift: up to 2.75 inches (HOSS 1.0) or 2 inches (HOSS 2.0)
• Material: CNC machined 6061 billet aluminum with black anodized finish
• Geometry-safe design: engineered to prevent ball joint overextension or bind
• OEM wheel and tire compatible: fits stock wheels and tires

Specifications

Who This Is For and Isn't

This kit suits 2021–2026 Ford Bronco owners who want a 3-inch front lift and increased ground clearance for larger tires, using the factory coilover architecture rather than replacing it. It is compatible with OEM wheels and tires and with both HOSS 1.0 and HOSS 2.0 suspension packages.

This kit does not fit the Ford Bronco Raptor or any Bronco equipped with the HOSS 3.0 suspension system. Installation requires recalibration of Advanced Driver Assistance Systems (ADAS) afterward. Running 35-inch tires without the Sasquatch Package requires high-clearance crash bars (ICON part number 42000, sold separately); 37-inch tires with the Sasquatch Package may require fender trimming and modifications.

Common Questions

Which Ford Bronco model years does this kit fit?

The ICON Alloys Coilover Spacer Kit fits 2021–2026 Ford Bronco models equipped with either the HOSS 1.0 or HOSS 2.0 suspension package. It does not fit the Ford Bronco Raptor or any Bronco with the HOSS 3.0 system.

How much rear lift does this kit provide?

Rear lift from the ICON Alloys Coilover Spacer Kit depends on the Bronco's factory suspension package. HOSS 1.0-equipped Broncos gain up to 2.75 inches of rear lift; HOSS 2.0-equipped Broncos gain 2 inches of rear lift. Front lift is 3 inches for both.

Does this kit work with the factory wheels and tires?

Yes, the ICON Alloys Coilover Spacer Kit is confirmed compatible with OEM wheels and tires. Owners running larger aftermarket tires should review the tire and wheel fitment notes, as 35-inch tires without the Sasquatch Package require high-clearance crash bars (ICON part number 42000, sold separately).

Is any recalibration required after installing this kit?

Yes. After installing the ICON Alloys Coilover Spacer Kit, the vehicle's Advanced Driver Assistance Systems (ADAS) must be recalibrated. This is a required post-installation step and should be performed by a qualified technician.

What is this kit made from?

The ICON Alloys Coilover Spacer Kit is CNC machined from 6061 billet aluminum and finished with a black anodized coating for corrosion resistance in on- and off-road conditions.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.