ICON Alloys Anza 17x8.5 6x135 +6mm Silver Machined Wheel

The ICON Alloys Anza is a 17x8.5 aluminum alloy wheel in a 6x135 bolt pattern with a +6mm offset and 5-inch backspace, finished in Silver Machined with a clear powder coat, and rated to 2,750 lbs per wheel. The concave profile and deep stepped lip give the Anza a distinct look on pavement or trail, while application-specific offset and backspace dimensions are engineered to maximize caliper clearance and reduce scrub radius.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Engineered Clearance, Not Just Looks

The Anza's offset and backspace figures are not chosen for aesthetics alone. By reducing scrub radius, the wheel geometry lowers the lateral force the steering system must manage over rough ground, which translates to more predictable handling and reduced steering kickback on uneven terrain. Buyers pairing these wheels with an ICON Vehicle Dynamics suspension system get dimensions that are already tuned to work with ICON's shock and spring geometry rather than fighting it.

Machined Surface With Protective Clear Coat

The Silver Machined finish combines a machined aluminum face with a clear powder coat layer that seals the surface against corrosion. That combination holds up better in wet or muddy conditions than a bare machined face, and it keeps the contrast between the machined highlights and the surrounding finish intact over time without requiring polishing.

Reduced Unsprung Weight

Aluminum alloy construction keeps unsprung and rotating mass lower than a comparable steel wheel. Less unsprung weight means the suspension can follow terrain changes more quickly, improving both on-road ride quality and off-road traction. That difference shows up on washboard roads and rocky trails, not just on a spec sheet.

Features

• Concave profile with deep stepped lip: distinctive look on trail or street
• Machined surface with clear powder coat: corrosion resistance without polishing
• 2,750 lb load rating: stated per-wheel capacity
• Application-specific offset and backspace: engineered to maximize caliper clearance and reduce scrub radius
• Aluminum alloy construction: reduced unsprung and rotating mass

Specifications

Who This Is For and Isn't

The Anza in this configuration suits buyers who need a 6x135 bolt pattern, a +6mm offset, and a 5-inch backspace, particularly those running or planning to run an ICON Vehicle Dynamics suspension system, where the Anza's geometry is already tuned to complement ICON's shock and spring packaging.

This listing is for one wheel in Silver Machined only; Satin Black and Gloss Gunmetal finishes are separate listings. Professional mounting and balancing with an appropriately sized tire is recommended before installation. California residents: this product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm (Proposition 65).

Common Questions

What is the load rating for the ICON Alloys Anza?

The ICON Alloys Anza in this 17x8.5 6x135 configuration carries a stated load rating of 2,750 lbs per wheel. Buyers should verify that the combined four-wheel rating meets or exceeds their vehicle's gross axle weight ratings before purchase.

Does this listing include a tire, lug nuts, or TPMS sensors?

This listing covers one ICON Alloys Anza wheel only. Tires, lug nuts, TPMS sensors, and any other hardware are not included and must be sourced separately. Professional mounting and balancing of a correctly sized tire is recommended prior to vehicle installation.

Is the Silver Machined finish protected against corrosion?

The Silver Machined finish on the Anza combines a machined aluminum face with a clear powder coat layer. The clear coat seals the machined surface to resist corrosion and preserve the contrast of the finish without requiring regular polishing.

Will the Anza work with my existing ICON Vehicle Dynamics suspension?

The Anza's offset and backspace dimensions are engineered to complement ICON Vehicle Dynamics suspension systems by maximizing caliper clearance and optimizing wheel position for full suspension travel and steering function. Buyers should confirm that the specific +6mm offset and 5-inch backspace suit their vehicle's suspension configuration before ordering.