ICON 2023-2026 Toyota Sequoia 3-3.75" Lift Stage 3 Suspension System

The ICON Vehicle Dynamics Stage 3 Suspension System is a complete front-and-rear upgrade for the 2023-2026 Toyota Sequoia, delivering 3-3.75" of front lift over stock on non-TRD-equipped vehicles using OE upper control arms, with 2.5 Series internal-reservoir coilovers up front and 2.0 Aluminum Series shocks with dual-rate coil springs in the rear. TRD Off-Road and TRD Pro submodels see a reduced front lift range of 1-1.75" and remain at stock rear height. SKU: K53233.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Front Coilovers Built for Travel and Adjustability

The 2.5 Series VS internal-reservoir front coilovers use a 2.5" shock body with increased piston area, producing up to 40% more front wheel travel than stock components. The threaded body allows ride-height adjustment across the full 3-3.75" lift range without swapping springs or hardware, so the Sequoia can be dialed in for a level stance that accommodates tires up to 35" (minor fender trimming and modifications may be required). Vehicle-specific valving means the damping curve is calibrated for the Sequoia's weight and geometry rather than adapted from a generic platform tune.

Sway Bar Drop Kit Preserves Full Suspension Movement

The included sway bar drop brackets reposition the OE sway bar end-link attachment point so the bar operates without binding through the full range of suspension travel. Without this correction, a lifted sway bar geometry creates progressive bind that effectively limits wheel travel before the shock reaches its limit. Keeping the sway bar geometry correct also avoids overstressing OE links and end-link hardware.

Rear Dual-Rate Springs and Matched Shocks

The dual-rate rear coil springs use a softer primary rate for everyday ride comfort and a stiffer overload rate that resists bottoming under load or on rough terrain. On non-TRD Sequoias the springs add 2" of rear lift; on TRD Off-Road-equipped vehicles they return the rear to stock height, producing a level front-to-rear stance in both cases. The 2.0 Aluminum Series rear shocks are valved to complement the 2.5 Series front coilovers, keeping damping balanced across the axles.

Features

• 2.5 Series VS IR front coilovers: 2.5" shock body, internal reservoir, threaded body for 3-3.75" lift adjustment with OE UCAs
• Up to 40% more front wheel travel: vehicle-specific shock length and valving over stock components
• Sway bar drop kit included: reduces OE sway bar link bind through full suspension travel range
• Dual-rate rear coil springs: softer primary rate plus firmer overload rate; 2" rear lift on non-TRD, 0" on TRD Off-Road
• 2.0 Aluminum Series rear shocks: nitrogen-charged monotube with internal reservoir, valved to match front coilovers
• Fully rebuildable and re-tunable: all ICON shock absorbers in this system are serviceable

Specifications

Who This Is For and Isn't

This system suits 2023-2026 Toyota Sequoia owners on non-TRD or TRD Off-Road submodels who want a 3-3.75" front lift (or 1-1.75" on TRD Off-Road), improved wheel travel, and the ability to run tires up to 35" while retaining OE upper control arms. It is also appropriate for TRD Pro submodels within the noted lift constraints.

This system is not compatible with Sequoias equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS). Vehicles with OE TRD billet front upper control arms are not compatible with this system at any lift height; those vehicles require ICON Delta Joint Pro UCAs (part 58461DJ or 58561DJ) for fitment. Lifting above 3.75" requires an ICON upper control arm. On 4WD models without TRD Off-Road package, an ICON differential drop kit (part 55156) or Toyota TRD axles are required to avoid front axle damage; TRD Pro is exempt. Vehicles with a TRD aluminum skid plate also require part 55164. ADAS recalibration is required after installation. Taller rear ride heights on TRD Off-Road or TRD Pro submodels require kit K53233S instead. California residents: this product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm (Proposition 65).

Common Questions

How much lift does this system provide on a standard (non-TRD) 2023-2026 Sequoia?

The ICON Stage 3 system provides 3-3.75" of front lift and 2" of rear lift over stock on a non-TRD 2023-2026 Toyota Sequoia when using OE upper control arms. Lift heights are based on a stock-equipped vehicle; adding accessories that increase vehicle weight will alter the realized lift range.

What lift does this system produce on a TRD Off-Road or TRD Pro Sequoia?

On a 2023-2026 Toyota Sequoia equipped with the TRD Off-Road package, the Stage 3 system delivers 1-1.75" of front lift and 0" of rear lift, resulting in a level stance. Owners who want taller rear ride heights on TRD Off-Road or TRD Pro submodels should consider kit K53233S instead.

Is this system compatible with Adaptive Variable Suspension or the Load-Leveling air suspension?

No. The ICON Stage 3 system for the 2023-2026 Toyota Sequoia is not compatible with vehicles equipped with Adaptive Variable Suspension (AVS) or Load-Leveling Rear Height Control Air Suspension. Buyers should confirm which suspension package their Sequoia has before ordering.

Do I need new upper control arms with this kit?

OE upper control arms are compatible up to 3.75" of lift on the Sequoia. Lifting above 3.75" requires an ICON upper control arm. Vehicles with OE TRD billet front upper control arms are not compatible with this system at any lift height and require ICON Delta Joint Pro UCAs (part 58461DJ or 58561DJ).

What additional parts may be required for 4WD models?

On 4WD Sequoias without the TRD Off-Road package, ICON recommends installing the ICON differential drop kit (part 55156) or Toyota TRD axles to prevent front axle damage. This requirement does not apply to TRD Pro models. Vehicles with a TRD aluminum skid plate also require part 55164 for fitment.