ICON 2.5 VS Remote Reservoir Coilover Kit for 1996-2002 Toyota 4Runner

The ICON 2.5 VS Remote Reservoir Coilover Kit is a front suspension upgrade for 1996–2002 Toyota 4Runner, offering 0–3 inches of lift height adjustability through a 2.5-inch shock body with vehicle-specific valving and an external remote reservoir. The kit is 100% bolt-on with no cutting or welding required, and it is available as a single fitment for the 1996–2002 4Runner.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

Vehicle-Specific Valving for On- and Off-Road Control

ICON engineers the valving in these coilovers specifically for the 1996–2002 4Runner's suspension geometry rather than using a generic tune. That specificity means the damping curve is calibrated for the actual loads and travel rates this platform generates, producing more predictable handling on pavement and more controlled body motion on rough terrain. The result is improved ride quality over stock in both environments without the compromise of a one-size-fits-all shock.

Remote Reservoir for Sustained Performance

The external remote reservoir separates additional fluid and gas volume from the main shock body, which extends the duration of consistent damping before heat-induced fade sets in. During extended off-road use, repeated hard compressions on a trail or a long washboard section raise operating temperature faster than a conventional shock can shed it; the reservoir keeps that temperature lower throughout the run. Consistent damping throughout a demanding section means the suspension behaves the same at the end as it did at the start.

Adjustable Lift and Engineered Components

The 0–3 inch lift range lets the owner dial in ride height to match wheel and tire choices without swapping springs. ICON-engineered coil springs, 6061 aircraft-grade aluminum CNC machined components, a corrosion-resistant CAD-plated shock body, a 7/8-inch induction-hardened chrome-plated shaft, and FK Rod End bearings are all included in the kit. The FK bearings are designed for extended service life and minimal deflection under load.

Features

• 2.5-inch shock body: larger piston area than stock for improved damping ability
• 0–3 inch lift adjustability: height set via coilover preload without spring swap
• Remote reservoir: maintains cooler operating temperature during extended off-road use
• Vehicle-specific valving: tuned for 1996–2002 Toyota 4Runner geometry
• 6061 aircraft-grade aluminum components: CNC machined, corrosion-resistant CAD-plated shock body
• 100% bolt-on installation: no cutting or welding required

Specifications

Who This Is For and Isn't

This kit suits 1996–2002 Toyota 4Runner owners who want a front suspension upgrade with 0–3 inches of lift, improved damping over stock, and the ability to run aftermarket wheels and tires up to 33x11.50 inches without cutting. It is a front-only kit best paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks for balanced vehicle control.

This kit does not fit any Toyota 4Runner outside the 1996–2002 model years, and it does not include rear shocks. Tires larger than 33x11.50 inches may require fender trimming or other modifications and are not covered by this kit's bolt-on claim.

Common Questions

Does this kit include rear shocks?

The ICON 2.5 VS Remote Reservoir Coilover Kit covers the front suspension only on the 1996–2002 Toyota 4Runner. ICON rear 2.0 Aluminum Series or 2.5 Series shocks are sold separately and are recommended to balance vehicle control front to rear.

What lift height does this kit provide?

The 1996–2002 4Runner coilover kit offers 0–3 inches of lift height adjustability, set by adjusting coilover preload. This range allows the owner to accommodate different aftermarket wheel and tire combinations without swapping springs.

Will OEM wheels and tires still fit after installation?

Yes. The ICON 2.5 VS Coilover Kit is confirmed compatible with OEM wheels and tires on the 1996–2002 Toyota 4Runner. For aftermarket fitments, ICON recommends an 8–8.5-inch wide wheel with 4.75-inch backspace and tires up to 33x11.50 inches.

Is cutting or welding required to install this kit?

No cutting or welding is required. The ICON 2.5 VS Remote Reservoir Coilover Kit is a 100% bolt-on installation for the 1996–2002 Toyota 4Runner front suspension.

What is the Proposition 65 warning about?

This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm. This warning is required under California law and applies to the ICON 2.5 VS Remote Reservoir Coilover Kit as sold.