ICON 2.5 VS Internal Reservoir Front Coilover Kit for 2022-2023 Toyota Land Cruiser 300 Series

The ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir Front Coilover Kit is a vehicle-specific front suspension upgrade for the 2022-2023 Toyota Land Cruiser 300 Series, offering 1-3 inches of adjustable lift height over stock on a stock-equipped vehicle. The kit is not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.

Shipping: ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.

2.5-Inch Shock Body With Vehicle-Specific Valving

The 2.5-inch shock body and increased piston area over stock components give the front suspension more damping capacity than the factory setup can provide. ICON tunes the shock length and internal valving specifically for the Land Cruiser 300 Series rather than adapting a universal calibration, which means the damping curve is matched to the vehicle's weight and geometry from the start. The result is controlled, predictable behavior on pavement and composed absorption of impacts on rough terrain.

Adjustable Lift for Larger Wheel and Tire Fitment

The coilover's threaded body allows ride height to be set anywhere in the 1-3 inch lift range above stock, giving owners the flexibility to run larger wheel and tire combinations without committing to a fixed lift height. ICON's recommended aftermarket wheel sizes for this kit are 17x8.5 inches with 5.75-inch backspace and 25mm offset, or 18x9 inches with 6-inch backspace and 25mm offset. A 35x12.50-inch tire fits with the noted possibility of minor fender trimming and modifications.

Built to Last and Be Serviced in the Field

CAD-plated shock bodies resist corrosion, and 7/8-inch diameter shafts and FK rod end bearings are specified for longevity and minimal deflection under load. Every component in the kit is fully rebuildable and re-tunable, so the coilovers can be serviced and revalved rather than replaced when wear or a change in use demands it. CNC-machined 6061 aircraft-grade aluminum construction keeps unsprung weight in check while maintaining the structural integrity the 300 Series platform requires.

Features

• 2.5-inch shock body: larger piston area than stock for increased damping capacity
• 1-3 inch adjustable lift: threaded body allows ride height tuning on a stock-equipped vehicle
• Vehicle-specific valving: shock length and damping tuned for the Land Cruiser 300 Series
• 6061 aircraft-grade aluminum: CNC-machined components throughout
• CAD-plated shock bodies: corrosion-resistant finish with 7/8-inch diameter shafts
• FK rod end bearings: specified for longevity and minimal deflection
• Fully rebuildable and re-tunable: serviceable without full replacement

Specifications

California Residents: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.

Who This Is For and Isn't

This kit suits 2022-2023 Toyota Land Cruiser 300 Series owners running a stock-equipped vehicle who want 1-3 inches of adjustable front lift, improved damping over the factory setup, and the ability to run larger wheel and tire combinations on- or off-road.

This kit does not fit vehicles equipped with Load-Leveling Rear Height Control Air Suspension. It covers the front axle only; rear shocks are sold separately. Lift height range applies to a stock-equipped vehicle. Adding accessories or weight will alter the lift range achieved.

Common Questions

Does this kit fit a Land Cruiser 300 Series with the factory air suspension?

The ICON 2.5 VS Internal Reservoir Front Coilover Kit is not compatible with Toyota Land Cruiser 300 Series vehicles equipped with Load-Leveling Rear Height Control Air Suspension. Owners with that factory option should confirm their suspension configuration before ordering.

What lift height does this kit provide?

The front coilover kit provides 1-3 inches of adjustable lift over stock on a stock-equipped Land Cruiser 300 Series. Adding accessories or increasing vehicle weight will alter the lift range achieved, so the final ride height depends on the vehicle's loaded configuration.

What wheel and tire sizes work with this kit?

ICON recommends 17x8.5-inch wheels with 5.75-inch backspace and 25mm offset, or 18x9-inch wheels with 6-inch backspace and 25mm offset. A 35x12.50-inch tire fits, though minor fender trimming and modifications may be required depending on the specific setup.

Does this kit include rear shocks?

This kit covers the front axle only and does not include rear shocks. ICON notes that pairing these front coilovers with the ICON 2.5 Aluminum Series rear shocks balances vehicle control front to rear; the rear shocks are sold separately.

Can these coilovers be rebuilt or retuned later?

The ICON 2.5 VS front coilovers are fully rebuildable and re-tunable, meaning they can be serviced, revalved, or adjusted as the vehicle's use changes rather than requiring full replacement when wear occurs or a different damping tune is needed.