Flatline Van Co Flush Mount L-Track Kit for Mercedes-Benz Sprinter

The Flatline Van Co Flush Mount Bed Bracket L-Track Kit is a floor-to-ceiling vertical L-track system for 2007+ Mercedes-Benz Sprinter 1500, 2500, 3500, and 3500XD cargo vans, built from 6000 series aluminum with a UV-resistant black anodized finish. Pre-drilled to align directly with FVC Sprinter Bed Brackets, the kit gives builders on-demand bed height adjustment and additional mounting points for gear throughout the van interior. Two variants are available: one sized for the 144" High Roof wheelbase and one for the 170" wheelbase.

A Cleaner Interior Without Sacrificing Mounting Real Estate

The flush-mount profile is the defining feature of this L-track system. Rather than protruding into the living space, the track sits between wall panels and includes integrated lips that hold those panels tight against the van's structure. The result is a finished interior that looks intentional rather than improvised. That matters in a build where every inch of headroom and shoulder room counts. Because the track runs from the OEM floor to a typical paneled ceiling with no gaps, builders get a continuous mounting surface without having to plan around interruptions.

Industry-Standard Compatibility Keeps Future Options Open

The Flush Mount L-Track uses industry-standard L-track geometry, so anchors, tie-downs, and accessories designed for standard L-track drop straight in. That compatibility matters when a build evolves: adding a folding table, a gear net, or a cargo anchor years after the initial install does not require sourcing proprietary hardware. The track also flexes to follow the curve of the van wall during installation, so it conforms to the Sprinter's body contour without forcing a straight-line fit.

Pre-Drilled for a Straightforward DIY Install

Holes in the L-track are pre-drilled to line up with FVC Sprinter Bed Brackets, eliminating layout and measurement work at the most critical alignment step. The track bolts directly to the bed brackets, and it can be trimmed shorter when a tailored length is needed. On the 170" variant, the front L-track section is positioned to sit over the wheel well and terminate there, matching the landing points of the bed brackets on that wheelbase. Stainless steel flat head hardware is included. Installation guides are available from Flatline Van Co for both the 144" High Roof (SP0320B) and 170" (SP0321B) variants.

Features

• Flush-mount profile: sits between wall panels with minimal protrusion; integrated lips hold panels close to the van structure
• Floor-to-ceiling coverage: runs from OEM floor to a typical paneled ceiling with no gaps
• Pre-drilled alignment: holes match FVC Sprinter Bed Bracket mounting points for a direct bolt-on connection
• Trimmable length: can be cut shorter for a tailored fit in the build
• Industry-standard L-track: accepts anchors and accessories from any source
• 6000 series aluminum construction: UV-resistant black anodized finish; stainless steel flat head hardware included

Specifications

Who This Is For and Isn't

This L-track kit suits builders converting a 2007 or newer Mercedes-Benz Sprinter 1500, 2500, 3500, or 3500XD cargo van, specifically the 144" High Roof or 170" wheelbase, who are installing FVC Sprinter Bed Brackets and want a clean, flush-mounted vertical mounting surface that integrates with wall paneling and accepts standard L-track accessories.

This kit does not fit Sprinter passenger vans. It is not a standalone bed system. FVC Sprinter Bed Brackets are required and sold separately. It is not compatible with non-Sprinter vans, and it is not available in any finish other than black.

Common Questions

Which Sprinter wheelbases and roof heights does this L-track kit fit?

The Flatline Van Co Flush Mount L-Track Kit is available in two variants: one for the 2007+ Mercedes-Benz Sprinter 144" High Roof wheelbase (SP0320B) and one for the 2007+ Sprinter 170" wheelbase (SP0321B). Both fit Sprinter 1500, 2500, 3500, and 3500XD cargo vans. Neither variant fits Sprinter passenger vans.

Are FVC Sprinter Bed Brackets included with this kit?

No. The Flush Mount L-Track Kit includes the L-track sections and stainless steel flat head hardware, but FVC Sprinter Bed Brackets are sold separately. The L-track is pre-drilled to align with those brackets, and the system requires them for proper installation and bed height adjustment.

Can I use anchors and accessories from brands other than Flatline Van Co?

Yes. The Flush Mount L-Track uses industry-standard L-track geometry, so it accepts tie-down anchors, cargo nets, table mounts, and other standard L-track-compatible accessories from any source.

Can the L-track be cut to a shorter length?

Yes. The Flush Mount L-Track can be trimmed shorter for a tailored fit. On the 170" variant, the front section is designed to sit over the wheel well and terminate there to match the bed bracket landing points on that wheelbase.

What is included in the kit?

The Flatline Van Co Flush Mount L-Track Kit includes the L-track sections and stainless steel flat head mounting hardware. FVC Sprinter Bed Brackets and FVC Sprinter Bed Systems are compatible accessories but are sold separately. Installation guides for both variants are available from Flatline Van Co.

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.