DV8 Offroad Wrangler JL Push Bar for Mopar Rubicon Steel Bumper

The DV8 Offroad LBJL-13 is a prerunner-style push bar and light mount built for 2018 and newer Jeep Wrangler JL models equipped with the Mopar Front Rubicon Steel Off-Road Bumper. Constructed from 3mm, 1.75-inch diameter steel tube and finished in micro-texture black powder coat, it bolts to factory mounting points with no cutting or drilling and adds a single 20-inch light bar, up to eight 3-inch pod lights, or up to four 7-inch round lights to an OEM metal bumper that otherwise has no dedicated light-mount position.

Low Profile Where It Counts

The DV8 Offroad push bar keeps its height in check by design. A tall aftermarket light hoop can raise the vehicle's visual profile, catch wind on the highway, and obstruct sightlines. The LBJL-13's low-profile geometry avoids all three: the bar sits close to the bumper face, reducing aerodynamic drag compared to taller hoops and keeping the Wrangler's front end looking purposeful rather than cluttered. The push bar's own profile does not block the factory front camera, so the driver-assist feature remains usable. Any lights mounted to the bar may affect the camera view depending on their size and placement, so camera usability should be verified after lights are installed.

Bolt-On Installation Using Factory Hardware

The LBJL-13 uses the Mopar bumper's existing mounting points and factory hardware, so no new holes are drilled into the bumper and no hardware kit is required beyond what is already on the vehicle. DV8 Offroad estimates installation at approximately one hour. The push bar also clears OEM-recommended winches, so a winch already mounted to the Mopar bumper does not need to be removed or repositioned. The Mopar front license plate mount remains compatible as well.

Flexible Lighting Without Committing to One Configuration

The push bar's light-mount positions accommodate a single 20-inch light bar, eight 3-inch pod lights, or four 7-inch round lights. Pod-light positions allow mixing light colors and beam patterns: spot and flood pods can be combined to suit different trail conditions. Lights are not included and are sold separately.

Features

• Light-mount capacity: single 20-inch light bar, eight 3-inch pod lights, or four 7-inch round lights
• No-drill installation: uses factory Mopar bumper mounting points and existing hardware
• Camera-friendly profile: bar does not block the factory front camera (mounted lights may affect camera view)
• Winch clearance: compatible with OEM-recommended winches already mounted to the Mopar bumper
• License plate compatibility: works with the Mopar front license plate mount
• Finish: micro-texture black powder coat over 3mm, 1.75-inch diameter steel tube

Specifications

Who This Is For and Isn't

The LBJL-13 suits 2018 and newer Jeep Wrangler JL owners who have the Mopar Front Rubicon Steel Off-Road Bumper already installed and want to add a light bar or pod lights to their OEM metal bumper without cutting, drilling, or replacing the bumper itself.

This push bar does not fit Wrangler JL models with the factory plastic bumper, any non-Mopar aftermarket steel bumper, or any other Jeep model. It is not designed for the Wrangler JK or Gladiator JT. Lights are not included.

Common Questions

What bumper does this push bar require?

The DV8 Offroad LBJL-13 push bar is designed exclusively for the Mopar Front Rubicon Steel Off-Road Bumper on 2018 and newer Jeep Wrangler JL models. It is not compatible with the factory plastic bumper or any non-Mopar aftermarket bumper, and it does not fit other Jeep models.

What size lights can I mount to this push bar?

The LBJL-13 push bar accommodates a single 20-inch light bar, up to eight 3-inch pod lights, or up to four 7-inch round lights. Pod-light positions allow mixing beam patterns and colors. Lights are not included with the push bar and must be purchased separately.

Will this push bar block my factory front camera?

The DV8 Offroad LBJL-13 push bar's own profile does not block the factory front camera on the Jeep Wrangler JL. However, lights mounted to the bar may affect the camera's view depending on their size and position, so camera usability should be verified after any lights are installed.

Does installation require drilling or cutting?

No cutting or drilling is required. The LBJL-13 push bar bolts to the existing mounting points on the Mopar Front Rubicon Steel Off-Road Bumper using factory hardware already on the vehicle. DV8 Offroad estimates installation at approximately one hour.

Is this push bar compatible with a winch?

The DV8 Offroad LBJL-13 push bar is compatible with OEM-recommended winches already mounted to the Mopar Front Rubicon Steel Off-Road Bumper. A winch does not need to be removed or repositioned to install this push bar.

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.