DV8 Offroad Universal Spec Series Bull Bar for Ford and GM

The DV8 Offroad Universal Spec Series Bull Bar is a bolt-on steel tube bar that mounts to select DV8 Spec Series front bumpers, adding a layer of front-end protection and a set of underside lighting mounts without requiring any cutting or fabrication. Built from 1.5-inch diameter, 3.5mm steel tubing and finished in a micro-texture black powder coat, it is designed to match the visual language of the bumper it attaches to rather than read as a separate add-on. Compatible bumpers cover the 2017–2022 Ford Super Duty, 2021–2026 Ford Bronco MTO V2, 2020–2023 GMC Sierra HD, and 2020–2023 Chevrolet Silverado HD Spec Series front bumpers.

Multiple Lighting Configurations

The bull bar's underside mounting points accept a range of light bar sizes: 20-inch single row, 20-inch dual row, 13-inch single row XL, and 10-inch bars, as well as pod lights. Multiple mounting positions mean a builder can run a single bar, a pair of pods, or a combination of both depending on what the trail or the rig demands. That flexibility matters when lighting needs change between a dedicated trail rig and a truck that also sees highway miles, because the same bar can be reconfigured rather than replaced.

Bolt-On Installation

Installation uses the included hardware and requires no cutting, with an estimated completion time of about one hour. A no-cut bolt-on process keeps the bumper itself unmodified, which matters for resale value and for owners who may swap bumpers between builds. All required hardware ships with the bull bar, so no separate trip to a hardware store is needed before starting the install.

Built to Handle Trail Use

The 1.5-inch diameter steel tubing at 3.5mm wall thickness gives the bar enough rigidity to hold lighting securely over rough terrain without flexing under vibration. The micro-texture black powder coat finish resists minor abrasion and blends with the matte surface of the paired DV8 Spec Series bumper. Because the bar mounts to the bumper's underside attachment points rather than to the vehicle frame directly, it transfers load into the bumper structure rather than adding stress to the vehicle's front fascia.

Features

• Steel tube construction: 1.5-inch diameter, 3.5mm wall steel tubing
• Micro-texture black powder coat: matches DV8 Spec Series bumper finish
• Underside lighting mounts: accepts 20-inch single row, 20-inch dual row, 13-inch single row XL, and 10-inch light bars, plus pods
• Multiple mounting positions: configure pods, bars, or a combination
• Bolt-on installation: no cutting required, hardware included, approximately one hour
• Bumper-specific fitment: pairs with DV8 Spec Series bumpers FBFF2-07, FBBR-07, FBGC2-01, and FBCS2-03

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

This bull bar suits owners of the 2017–2022 Ford Super Duty, 2021–2026 Ford Bronco MTO V2, 2020–2023 GMC Sierra HD, or 2020–2023 Chevrolet Silverado HD who have already installed the corresponding DV8 Spec Series front bumper (FBFF2-07, FBBR-07, FBGC2-01, or FBCS2-03) and want to add front-end protection and flexible lighting mounts. Bronco owners with parking sensors should expect minor wiring work during installation.

This bull bar does not fit any vehicle without the specific paired DV8 Spec Series bumper listed above, and it is not compatible with Ford applications using ACC relocation kits. It partially obstructs the front camera view on vehicles equipped with one. It is not a standalone bumper replacement.

Common Questions

Which specific bumpers does this bull bar attach to?

The DV8 Offroad Universal Spec Series Bull Bar attaches to four DV8 Spec Series front bumpers: FBFF2-07 for the 2017–2022 Ford Super Duty, FBBR-07 for the 2021–2026 Ford Bronco MTO V2, FBGC2-01 for the 2020–2023 GMC Sierra HD, and FBCS2-03 for the 2020–2023 Chevrolet Silverado HD. It does not mount directly to the vehicle frame or to any other bumper.

What size light bars and pods will fit on the mounting points?

The underside mounting points on this bull bar accept 20-inch single row bars, 20-inch dual row bars, 13-inch single row XL bars, and 10-inch bars, as well as pod lights. Multiple mounting positions allow a combination of pods and bars rather than locking the build into a single layout. Light bars and pods are sold separately.

Will this bull bar block my front camera?

Yes. The DV8 Offroad Universal Spec Series Bull Bar partially obstructs the front camera view on vehicles equipped with one. Buyers who rely on a front camera for parking or driver-assistance features should factor this into their decision before purchasing.

Does it work with Ford ACC relocation kits?

No. The DV8 Offroad Universal Spec Series Bull Bar is not compatible with Ford applications that use ACC relocation kits. Buyers with Ford Super Duty or Bronco builds that include an ACC relocation kit should not purchase this bull bar.

What tools and hardware are required for installation?

Installation is bolt-on and requires no cutting. All necessary hardware ships with the bull bar. DV8 Offroad estimates installation at approximately one hour, though actual time will vary with experience level. Bronco owners whose vehicles are equipped with parking sensors should expect minor additional wiring during the install.