DV8 Offroad Tube Rear Bumper for Ford F-150 Raptor

The DV8 Offroad RBFR1-01 Tube Rear Bumper is a bolt-on steel replacement bumper built for the 2017–2020 Ford F-150 Raptor, Raptor trim only. Its low-profile, prerunner-inspired tube design keeps the truck's aggressive stance intact while adding two 3" pod light mounts and welded zip-tie tabs for clean wire management. The bumper ships in a single variant covering all four model years of the second-generation Raptor.

Prerunner Profile Without the Weight Penalty

The tube construction keeps mass down compared to a full-plate replacement bumper, which matters on a truck already tuned for high-speed desert running. A lower rear profile also improves departure angle on steep exit terrain, so the bumper is working with the Raptor's geometry rather than against it. At 60 lb, the DV8 Offroad tube bumper adds meaningful protection without the handling trade-offs of a heavier steel unit.

Sensor and Hitch Compatibility Built In

Replacing a rear bumper on a late-model Raptor can mean losing parking sensors or the factory hitch. This bumper retains both. For 2017–2018 model years, replacement parking sensor bezels are included in the box so sensors transfer cleanly to the new bumper. Trucks from 2019–2020 retain their OEM bezels without modification. The factory hitch receiver remains fully usable after installation, so towing and hitch-mounted accessories are unaffected.

Ready for Lighting, Clean on Its Own

Two 3" pod light mounts are integrated into the bumper structure, positioned for supplemental trail or reverse lighting. Pod lights are sold separately. Welded zip-tie tabs route wiring internally so there are no exposed cables along the bumper face. The micro-texture black powder coat finish resists corrosion and trail abrasion without the glare of a gloss finish.

Features

• Prerunner tube design: low-profile steel construction that complements the Raptor's factory stance
• Two 3" pod light mounts: integrated mounts for supplemental lighting (pod lights sold separately)
• Welded zip-tie tabs: built-in wire management keeps lighting and sensor wiring routed cleanly
• Factory hitch compatible: OEM hitch receiver remains fully functional after installation
• Parking sensor support: replacement bezels included for 2017–2018; 2019–2020 models use OEM bezels
• Micro-texture black powder coat: durable finish suited for trail and weather exposure

Specifications

Who This Is For and Isn't

This bumper suits 2017–2020 Ford F-150 Raptor owners who want a lower, lighter rear bumper with integrated pod light mounts and clean wire routing, while retaining the factory hitch and parking sensors. It is a strong fit for overlanding and off-road builds where departure angle and trail aesthetics matter alongside everyday usability.

This bumper does not fit any F-150 trim other than the Raptor, and it does not fit F-150 model years outside 2017–2020. Installation requires minor trimming of the license plate bracket area and an estimated 4.5 hours of work. Pod lights are not included. WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Common Questions

Does this bumper fit all F-150 trims, or only the Raptor?

The DV8 Offroad RBFR1-01 Tube Rear Bumper fits the 2017–2020 Ford F-150 Raptor trim only. It is not compatible with other F-150 trims or with F-150 model years before 2017 or after 2020. Confirm your truck is the Raptor trim before ordering.

Will my factory parking sensors still work after installing this bumper?

Yes. The DV8 Offroad tube rear bumper is designed to retain factory parking sensor function on all covered model years. Replacement sensor bezels are included in the box for 2017–2018 Raptors. Trucks from 2019–2020 retain their OEM bezels and transfer them directly to the new bumper without additional parts.

Can I still use my factory hitch after installing this bumper?

Yes. The DV8 Offroad RBFR1-01 is designed to be compatible with the factory hitch receiver, so towing capacity and hitch-mounted accessories are unaffected by the bumper swap.

Are pod lights included with the bumper?

No. The DV8 Offroad tube rear bumper includes two integrated 3" pod light mounts, but the pod lights themselves are sold separately. The bumper is designed to look complete with or without lights installed.

How difficult is installation, and does it require cutting or welding?

The DV8 Offroad RBFR1-01 installs via a direct bolt-on process with no welding required. Minor trimming of the license plate bracket area is needed. DV8 Offroad estimates total installation at approximately 4.5 hours; actual time will vary depending on experience and shop setup.