DV8 Offroad Tube Front Bumper for 2014-2021 Toyota Tundra

The DV8 Offroad Tube Front Bumper is a bolt-on steel front bumper for 2014–2021 Toyota Tundra (all trims), built from 3.5mm and 5mm steel with an ultra-high-clearance tube design that keeps the front end free of obstacles on desert runs and rock terrain. The center section mounts a 20-inch dual-row light bar or up to six 3-inch pod lights; each wing adds one 3-inch pod. An optional prerunner-style push bar expands lighting capacity further and reinforces the front end. The bumper ships at 106 lb and installs without cutting in an estimated 4.5 hours.

Built to Clear Terrain

The tube-style construction raises the front profile well above where a conventional bumper would sit, so the Tundra can roll over rocks and through ruts without the bumper catching on the obstacle first. That clearance is not cosmetic. On a trail where a stock or low-profile bumper would hang up and stop forward progress, the high tube profile keeps the truck moving. The speckled gray accent skid plates cover the lower section, shielding the front end from rocks, sand, and debris that reach below the tubes.

Lighting Flexibility Without Rewiring the Truck

The DV8 Offroad Tube Front Bumper is designed around multiple lighting configurations so a Tundra owner can build the setup that matches how they drive. The center section accepts a 20-inch dual-row light bar or up to six 3-inch pod lights; each wing independently mounts one additional 3-inch pod. The optional push bar opens a third tier of options: a 20-inch single or dual light bar, four 7-inch round lights, or eight 3-inch pod lights. Welded zip-tie tabs are built into the bumper for clean wire routing, so adding lights does not mean loose wiring across the engine bay.

Bolt-On Install, Factory Features Intact

The bumper mounts directly to the factory attachment points with no cutting required, in an estimated 4.5 hours. The factory parking sensors carry over without modification, and the factory recovery points are retained so existing recovery gear and tow straps still attach where they always did. Adaptive Cruise Control remains functional with this bumper installed. The micro-texture black powder coat finish covers the steel; the accent panels use a speckled steel gray.

Features

• Ultra-high-clearance tube design: prevents hang-ups on rocks and obstacles
• Center lighting mount: accepts a 20-inch dual-row light bar or up to six 3-inch pod lights
• Wing lighting mounts: one 3-inch pod per side (two total)
• Speckled gray accent skid plates: full lower protection against rocks, sand, and debris
• Welded zip-tie tabs: clean wire routing built into the bumper structure
• Retains factory parking sensors and recovery points: no modification required
• Micro-texture black powder coat finish: bolt-on installation, no cutting required

Specifications

Who This Is For and Isn't

This bumper suits 2014–2021 Toyota Tundra owners (all trims) who run desert terrain, rock trails, or a mix of both and want a high-clearance front end with room to build out a serious lighting setup. The retained factory sensors and bolt-on installation make it a practical upgrade for daily-driven trucks that also see trail use.

The factory skid plate and factory fog lights are not compatible with this bumper and will not fit once it is installed. When the optional push bar is installed, it partially obstructs the front camera view. This bumper fits only the 2014–2021 Toyota Tundra; it does not fit any other make, model, or generation.

Common Questions

Does this bumper fit all trim levels of the 2014–2021 Toyota Tundra?

The DV8 Offroad Tube Front Bumper (FBTT2-07) is confirmed to fit all trim levels of the 2014–2021 Toyota Tundra. It does not fit any other Toyota model, any earlier or later Tundra generation, or any other make or model.

What lighting can I mount on this bumper without the optional push bar?

Without the push bar, the center section of the DV8 Offroad Tube Front Bumper accepts a 20-inch dual-row light bar or up to six 3-inch pod lights. Each wing independently mounts one 3-inch pod light, for two additional pods total.

What lighting does the optional push bar add?

With the optional prerunner-style push bar installed, the DV8 Offroad Tube Front Bumper gains capacity for a 20-inch single or dual light bar, four 7-inch round lights, or eight 3-inch pod lights on the push bar structure. Note that the push bar partially obstructs the front camera view when installed.

Will my factory parking sensors and Adaptive Cruise Control still work?

Yes. The DV8 Offroad Tube Front Bumper retains factory parking sensor functionality and is compatible with Adaptive Cruise Control. No sensor modification is required during the bolt-on installation.

Does the push bar come in the box, or is it sold separately?

The product listing describes the push bar as both "optional" and "included," which is contradictory. Confirm with TerrainVault before ordering whether the push bar ships in the box with this bumper or is a separate purchase.

How long does installation take, and is cutting required?

The DV8 Offroad Tube Front Bumper installs with a bolt-on process that requires no cutting. The estimated installation time is 4.5 hours, though actual time will vary depending on experience and shop setup.