DV8 Offroad Tube Fender Flares for Ford Bronco

The DV8 Offroad Tube Fender Flares (SKU FDBR-01) are a set of four bolt-on steel fender flares (two front, two rear) built for the 2021–2026 Ford Bronco. Constructed from 2.5mm and 3.5mm plate steel with a 2.5mm tube steel outer edge, they widen the fender opening to increase tire clearance for off-road articulation and shield the body from trail debris. They are available for Bronco Base, Big Bend, Black Diamond, Outer Banks, Badlands, and Wildtrak trims, including both Sasquatch and non-Sasquatch equipped vehicles.

More Room Where It Counts

The flares measure 4 inches wide at the front of each fender and taper to 3.75 inches toward the rear. That added width moves the fender edge outward, creating more clearance between the tire and the fender opening. On technical terrain (rock crawls, steep side-hills, deep ruts), greater articulation travel means the suspension can work through its full range without the tire contacting the fender. Buyers running larger tires or lift kits gain meaningful functional clearance, not just a visual change.

Steel Construction, Trail-Ready Finish

The fender body is formed from 2.5mm and 3.5mm plate steel, and the outer edge is finished with 2.5mm tube steel. That combination resists the flex and cracking that thinner materials develop after repeated trail impacts. The Micro-Texture Black powder coat finish is designed to hold up against brush, rocks, and UV exposure without the gloss that shows scuffs immediately. A rubber seal is included and fits between the flare and the body panel to block dust and small rocks from collecting in the gap, a detail that matters on long-haul overland routes where debris accumulation can cause paint damage over time.

Bolt-On Installation, No Cutting Required

The Tube Fender Flares use a bolt-on design that requires no cutting, drilling, or body modification. DV8 Offroad estimates installation at approximately two hours; actual time will vary by experience level. Because no permanent changes are made to the vehicle, the flares can be removed and reinstalled without leaving evidence of modification, which suits buyers who may want to return the Bronco to stock configuration or transfer the flares to a future build.

Features

• Set of four: two front and two rear fender flares included
• Tube and plate steel construction: 2.5mm/3.5mm plate steel body with 2.5mm tube steel outer edge
• Micro-Texture Black finish: textured powder coat for durability and low-glare appearance
• Rubber seal included: seals the gap between flare and body to block dust and rock intrusion
• Sasquatch and non-Sasquatch compatible: fits both factory wheel package configurations
• Bolt-on installation: no cutting or drilling required; estimated two-hour install

Specifications

Who This Is For and Isn't

These fender flares suit 2021–2026 Ford Bronco owners (Base, Big Bend, Black Diamond, Outer Banks, Badlands, and Wildtrak trims, with or without the Sasquatch package) who want to increase tire-to-fender clearance for off-road articulation and add body protection from trail debris without cutting or permanently modifying the vehicle.

These flares do not fit the Ford Bronco Heritage, Raptor, or Everglades models. They are not compatible with any other vehicle make or model.

Common Questions

Do these fender flares fit Broncos with the Sasquatch package?

Yes. The DV8 Offroad Tube Fender Flares (FDBR-01) are compatible with both Sasquatch and non-Sasquatch equipped 2021–2026 Ford Broncos across the Base, Big Bend, Black Diamond, Outer Banks, Badlands, and Wildtrak trims.

Which Bronco trims are not compatible with these flares?

The DV8 Offroad Tube Fender Flares do not fit the Ford Bronco Heritage, Raptor, or Everglades models. Buyers with those trims should confirm compatibility with a fitment-specific product before purchasing.

Does installation require cutting or drilling into the body?

No. The DV8 Offroad Tube Fender Flares use a bolt-on design that requires no cutting, drilling, or permanent body modification. DV8 Offroad estimates the installation at approximately two hours, though actual time will vary depending on experience level.

What is included with the fender flare set?

The DV8 Offroad Tube Fender Flares (FDBR-01) include a set of four steel fender flares (two front and two rear) along with a rubber seal that fits between the flares and the body to block dust and small rock intrusion at the mounting gap.

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.