DV8 Offroad Spec Series Front Bumper for GMC Canyon

The DV8 Offroad Spec Series Front Bumper is a steel off-road replacement bumper built for 2023–2026 GMC Canyon trucks across all trims. It integrates a heavy-duty winch mount, a front skid plate, and mounts for a 20-inch light bar and two 3-inch pod lights into a single unit finished in micro-texture black powder coat. Installation requires cutting and is estimated at 6.5 hours.

Built to Take the Hit

The Spec Series bumper is constructed from 3.5mm and 5mm steel, giving the front of the Canyon a structural upgrade over the factory fascia. The integrated front skid plate shields the front undercarriage from rock strikes and trail debris without requiring a separate skid purchase. A micro-texture black powder coat finish resists corrosion and surface abrasion, keeping the bumper presentable after repeated off-road use.

Recovery and Lighting Ready from the Start

A heavy-duty winch mount is built into the bumper, so adding a winch does not require a separate plate or adapter. Two 1-inch-thick D-ring mounts provide dedicated recovery attachment points for straps or shackles. For lighting, the bumper accepts a single 20-inch dual- or single-row light bar at center and two 3-inch pod lights at the outer positions, covering the most common auxiliary lighting configurations without additional brackets.

Factory Tech Stays Intact

The Spec Series bumper is designed to retain the Canyon's factory adaptive cruise control (ACC) sensors and front camera, so driver-assist features continue to function after installation. Welded-in zip tie tabs are included for routing auxiliary wiring cleanly through the bumper. Note that the factory fog lights and factory front skid plate do not carry over to this bumper.

Features

• Heavy-duty winch mount: integrated, no separate plate required
• Light bar mount: one 20-inch position accepts dual- or single-row bars
• Pod light mounts: two 3-inch positions at outer wings
• D-ring mounts: two 1-inch-thick mounts for recovery straps or shackles
• Integrated front skid plate: shields front undercarriage from trail hazards
• OEM sensor retention: compatible with factory ACC and front camera
• Wire management: welded-in zip tie tabs for clean auxiliary wiring runs

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

The DV8 Offroad Spec Series Front Bumper suits 2023–2026 GMC Canyon owners who want a steel off-road bumper with a built-in winch mount, integrated skid plate, and auxiliary lighting positions, and who are prepared for a body-cutting installation or plan to have it professionally installed.

This bumper does not fit any GMC Canyon outside the 2023–2026 model years, and it does not accommodate the factory fog lights or factory front skid plate. Winch, D-rings, light bar, and pod lights are not included. Installation requires cutting the vehicle.

Common Questions

Does this bumper retain the factory adaptive cruise control and front camera?

Yes. The DV8 Offroad Spec Series Front Bumper for the 2023–2026 GMC Canyon is designed to retain the factory adaptive cruise control (ACC) sensors and the factory front camera, so those driver-assist features remain operational after installation.

Will my factory fog lights transfer to this bumper?

No. The Spec Series Front Bumper does not retain the factory fog lights. Buyers who want forward lighting will need to use the bumper's 20-inch light bar mount or the two 3-inch pod light mounts with aftermarket auxiliary lights, sold separately.

Is cutting required to install this bumper?

Yes. Installation of the DV8 Offroad Spec Series Front Bumper requires cutting the vehicle. DV8 Offroad estimates the installation at approximately 6.5 hours, though actual time will vary based on experience and shop setup.

Does the bumper include a winch, D-rings, or lights?

No. The Spec Series Front Bumper includes the bumper itself with its integrated mounts and skid plate. The winch, D-ring shackles, light bar, and pod lights are not included and must be purchased separately.

What steel thickness is used in this bumper?

The DV8 Offroad Spec Series Front Bumper uses a combination of 3.5mm and 5mm steel construction, with the heavier gauge applied where structural demand is highest, finished in a micro-texture black powder coat.