DV8 Offroad Roof Rack Light Cutout Fairing for 2025–2026 Toyota 4Runner

The DV8 Offroad Roof Rack Light Cutout Fairing (RRTF3-02L) is a bolt-on lighting fairing built exclusively for the DV8 Spec Series Roof Rack (RRTF3-02) on 2025–2026 6th Gen Toyota 4Runner. Its precision-cut profile keeps auxiliary lights low and tight to the roofline, reducing aerodynamic drag and wind noise on road and trail. The fairing accommodates a 40-inch straight light bar, dual 20-inch single-row bars, or up to ten 3-inch pod lights across its ten integrated mounting slots.

Low-Profile Design Cuts Drag and Wind Noise

The cutout fairing positions auxiliary lighting as close to the roofline as the rack geometry allows. Keeping lights low reduces the frontal area exposed to airflow, which translates to less drag and quieter highway driving on the way to the trailhead. For overlanders who run roof-mounted lighting year-round, that reduction in wind noise on extended drives is a practical, daily benefit rather than a cosmetic one.

Ten Slots, Three Lighting Formats

The fairing's ten integrated slots give buyers genuine flexibility in how they configure their lighting. A single 40-inch straight light bar (42-inch mount-to-mount) fits the full span. Included brackets support two 20-inch single-row bars as an alternative. Up to ten 3-inch pod lights can be distributed across the slots for a spread-beam setup. That range of configurations means the fairing works with a variety of lighting brands and beam patterns without requiring a different mounting solution for each.

Finish and Construction Built for Trail Use

The fairing is fabricated from 3mm and 5mm steel plate and finished in a micro-texture black powder coat that matches the DV8 Spec Series Roof Rack. The powder coat finish resists trail wear and keeps the fairing's appearance consistent with the rest of the rack system over time. Installation is bolt-on and estimated at approximately 1.5 hours when added after the rack is already mounted, or about 30 minutes less when incorporated into the initial rack installation.

Features

• Exclusive rack compatibility: designed for the DV8 Spec Series Roof Rack (RRTF3-02) on 2025–2026 6th Gen Toyota 4Runner only
• Ten integrated mounting slots: supports a 40-inch straight light bar (42-inch mount-to-mount), dual 20-inch single-row bars, or up to ten 3-inch pod lights
• Included brackets: brackets for mounting two 20-inch single-row bars are included
• Material: 3mm and 5mm steel plate construction
• Finish: micro-texture black powder coat matched to DV8 Spec Series rack finish
• Bolt-on installation: no cutting or drilling required; estimated 1.5-hour install after rack is mounted

Specifications

Who This Is For and Isn't

The DV8 Roof Rack Light Cutout Fairing suits 2025–2026 6th Gen Toyota 4Runner owners who have already installed or are planning to install the DV8 Spec Series Roof Rack (RRTF3-02) and want to add a 40-inch light bar, dual 20-inch single-row bars, or a pod light array with a low-profile, aerodynamically refined mounting solution.

This fairing does not fit any roof rack other than the DV8 Spec Series Roof Rack (RRTF3-02), and it does not fit any vehicle other than the 2025–2026 6th Gen Toyota 4Runner. Auxiliary lights are not included and are sold separately.

Common Questions

Which roof rack does this fairing fit?

The DV8 Roof Rack Light Cutout Fairing (RRTF3-02L) is designed exclusively for the DV8 Spec Series Roof Rack (RRTF3-02) on 2025–2026 6th Gen Toyota 4Runner. It is not compatible with any other rack model or vehicle.

Are lights included with the fairing?

No. The DV8 Roof Rack Light Cutout Fairing includes the fairing and brackets for mounting two 20-inch single-row bars, but auxiliary lights are sold separately. Light brand and model are the buyer's choice.

What lighting configurations does the fairing support?

The fairing's ten integrated slots accommodate a 40-inch straight light bar (42-inch mount-to-mount), two 20-inch single-row bars using the included brackets, or up to ten 3-inch pod lights. All three configurations accept lights from a range of brands and beam patterns.

How long does installation take?

The DV8 Roof Rack Light Cutout Fairing uses bolt-on installation with no cutting or drilling. Installing the fairing after the rack is already mounted takes approximately 1.5 hours; adding it during the initial rack installation takes approximately 30 minutes less.

What is the fairing made of and how is it finished?

The DV8 Roof Rack Light Cutout Fairing is fabricated from 3mm and 5mm steel plate and finished in a micro-texture black powder coat that matches the DV8 Spec Series Roof Rack finish.

California Proposition 65 Warning: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.