DV8 Offroad Roof Mount for Jeep Wrangler JL MOLLE Panel

The DV8 Offroad Roof Mount (MPJL-11) is an aluminum overhead mounting bracket for the 2018–2026 Jeep Wrangler JL that secures a 15" x 12" Universal MOLLE Panel (UNMP-04, sold separately) to the factory hardtop freedom panel area. Built from 3mm aluminum with a Micro-Texture Black Powder Coat finish, each mount is sold per side and requires drilling for a permanent, secure fit. Compatible with the OEM factory hardtop only.

Overhead Space Put to Work

The factory hardtop freedom panel area is one of the few untapped mounting surfaces inside a Wrangler JL, and this bracket turns it into usable overhead storage. Radios, med kits, small storage bags, and other trail essentials stay within arm's reach without occupying floor space, seat backs, or cargo zones. For a rig that already carries recovery gear, water, and camp kit, keeping frequently accessed items overhead means less digging and faster access on the trail.

Aluminum Construction, Fixed Mount

The 3mm aluminum construction keeps added weight minimal while providing the rigidity needed to hold a loaded MOLLE panel over rough terrain. Once drilled and installed, the mount stays fixed to the hardtop structure with no flex and no rattle. The MOLLE panel itself can still be adjusted after installation, so the angle and layout can be dialed in without removing the mount. The Micro-Texture Black Powder Coat finish resists scratches and blends with the interior rather than standing out against it.

Buy One Side or Both

Each purchase covers one mount for one panel. Running a single panel on the driver or passenger side keeps the opposite side clear; buying two mounts and two UNMP-04 panels fills the full overhead area for maximum organization. Because each side is purchased independently, the setup scales to the build without requiring a full pair upfront.

Features

• Fitment: 2018–2026 Jeep Wrangler JL with OEM factory hardtop only
• Compatible panel: designed for the DV8 Offroad 15" x 12" Universal MOLLE Panel (UNMP-04), sold separately
• Material: 3mm aluminum with Micro-Texture Black Powder Coat finish
• Installation: drilling required for permanent fit; estimated 30-minute install
• Sold per side: one mount per purchase; buy two for dual-panel overhead coverage
• Panel adjustability: mount fixes to hardtop; MOLLE panel angle remains adjustable after install

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

This mount suits 2018–2026 Jeep Wrangler JL owners running the OEM factory hardtop who want to convert the overhead freedom panel area into organized, accessible storage for trail gear, communications equipment, or medical kits.

This mount does not fit soft tops, the Bestop Sunrider, the Sky One-Touch power top, or any aftermarket hardtop. The 15" x 12" Universal MOLLE Panel (UNMP-04) is not included and must be purchased separately. Each purchase is one mount for one side only.

Common Questions

Does this mount include the MOLLE panel?

The DV8 Offroad Roof Mount (MPJL-11) does not include a MOLLE panel. It is designed to be used with the DV8 Offroad 15" x 12" Universal MOLLE Panel (UNMP-04), which is sold separately. The mount provides the overhead attachment point; the panel must be purchased and added to complete the storage setup.

Will this fit my soft top or Sky One-Touch?

The MPJL-11 roof mount is compatible with the OEM factory hardtop only. It does not fit soft tops, the Bestop Sunrider, the Sky One-Touch power top, or aftermarket hardtops. The mount uses the factory hardtop freedom panel area as its attachment surface, which is not present on other top configurations.

Does installation require drilling?

Yes. The DV8 Offroad Roof Mount requires drilling for a permanent, secure fit to the factory hardtop. DV8 Offroad estimates the install at approximately 30 minutes, though time will vary depending on experience and tools available.

How many mounts do I need for two panels?

Each MPJL-11 purchase covers one mount for one side. To run MOLLE panels on both the driver and passenger sides of the overhead area, two mounts and two UNMP-04 panels are required, each purchased separately.

Can the panel angle be adjusted after the mount is installed?

Yes. Once the DV8 Offroad Roof Mount is drilled and fixed to the hardtop, the mount itself stays in place permanently, but the MOLLE panel can still be adjusted to change the angle or layout. This allows the storage configuration to be fine-tuned without removing or modifying the mount.