DV8 Offroad Quick Release MOLLE Panel Tool Mounts Pair

The DV8 Offroad Quick Release MOLLE Panel Tool Mounts are aluminum-and-rubber clamp mounts, sold as a pair, that bolt to any MOLLE panel with a standard 1½" × 1" rectangle cutout pattern and at least 2mm of panel thickness. Each mount's clamp radius adjusts from 1¼" to 1⅝" to grip a range of cylindrical tools and accessories, and the base rotates to dial in the mounting angle. Use one mount alone for smaller gear or both together to secure long-handled tools like shovels and axes.

Grab and Go Without Fumbling

The quick-release rubber clasp on each mount lets a driver or passenger pull a flashlight, recovery tool, or air deflator with one hand and snap it back just as fast. On a trail where conditions change quickly, not having to unbolt or unstrap gear means the right tool is out and in use before the moment passes. The rubber clasp also absorbs vibration, so gear stays quiet and rattle-free over rough terrain without additional padding or foam.

One Pair, Many Configurations

Because each mount rotates at the base and the pair can be spaced anywhere along a MOLLE panel's webbing, the same two mounts can hold a compact recovery tool vertically one day and a full-length shovel horizontally the next. The adjustable clamp radius means the mounts are not locked to a single tool diameter: a slim flashlight body and a thicker axe handle both fall within the 1¼" to 1⅝" range. That flexibility reduces the number of dedicated holders needed across a build.

Hardware That Stays Put

The mounting plates are aluminum with a gloss powder-coat finish in red, gray, or black, and the clamp body is high-density rubber. Stainless steel M6 hardware is included, so there is no need to source separate fasteners. The bolt-on attachment to the MOLLE panel is firm enough to hold gear through off-road use without play or creep.

Features

• Quick-release rubber clasp: one-handed tool removal and re-securing without bolts or straps
• Adjustable clamp radius: 1¼" minimum closed to 1⅝" maximum open
• Rotating base: adjusts mounting angle for vertical or horizontal tool placement
• Aluminum and high-density rubber construction: 7.5mm aluminum mounting plate with rubber clamp body
• Gloss powder-coat finish: available in red, gray, or black
• Included stainless steel M6 hardware: bolts directly to standard MOLLE panel cutouts

Specifications

Who This Is For and Isn't

These mounts suit overlanders, off-road drivers, and truck or SUV owners who already run a MOLLE panel (interior or exterior) and want fast, tool-free access to cylindrical gear like flashlights, recovery tools, air deflators, or long-handled equipment such as shovels and axes. Confirmed fitment on DV8 Offroad, Rago Fabrication, and ADD Offroad panels.

These mounts are not compatible with MOLLE panels thinner than 2mm or with panels that do not use a standard 1½" × 1" rectangle cutout pattern. Compatibility with other brands' MOLLE panels is not confirmed. A MOLLE panel is not included.

Common Questions

What size tools or accessories will these mounts hold?

The DV8 Offroad Quick Release MOLLE Mounts grip cylindrical items with a diameter that falls between the 1¼" minimum closed radius and the 1⅝" maximum open radius. That range covers common flashlight bodies, recovery tool handles, air deflator housings, and similar round-profile gear. Items outside that diameter range will not be held securely.

Can one mount hold a shovel or axe on its own?

A single mount is suited for smaller, lighter items like flashlights or compact recovery tools. For long-handled tools such as shovels or axes, both mounts in the pair work best used together, one positioned near each end of the handle, to distribute the load and keep the tool stable while driving.

Which MOLLE panels are confirmed to work with these mounts?

The DV8 Offroad Quick Release MOLLE Mounts are confirmed to fit DV8 Offroad, Rago Fabrication, and ADD Offroad MOLLE panels. Any panel must have a 1½" × 1" rectangle cutout pattern and be at least 2mm thick. Compatibility with other brands' MOLLE panels is not confirmed.

What hardware is included, and what tools are needed to install?

Stainless steel M6 fasteners are included with the DV8 Offroad Quick Release MOLLE Mounts. The mounts bolt directly onto the MOLLE panel using the included hardware. Installation is estimated at approximately 30 minutes; time will vary depending on experience.

Can these mounts be used on exterior MOLLE panels?

The DV8 Offroad Quick Release MOLLE Mounts are designed for use on both interior and exterior MOLLE panels, provided the panel meets the 2mm minimum thickness and 1½" × 1" cutout pattern requirements. The aluminum and high-density rubber construction is intended to withstand extended use in off-road conditions.