DV8 Offroad OE Plus Side Steps for Toyota 4Runner
DV8 Offroad OE Plus Side Steps for Toyota 4Runner
Couldn't load pickup availability
The DV8 Offroad OE Plus Side Steps are bolt-on steel running boards designed for 2010–2024 Toyota 4Runner (all trims except Limited), built to add secure entry footing and rocker panel protection without reducing the factory ground clearance that matters on technical trails. Steel construction uses 3mm, 4mm, and 5mm wall thicknesses depending on section, finished in a micro-texture black powder coat. The steps mount to the body and pinch weld with no cutting required.
High-Clearance Design That Stays Out of the Way
Many aftermarket steps hang below the rocker line and become the lowest point on the vehicle, turning a convenience feature into a trail liability. The OE Plus Side Steps use a high-clearance profile so nothing hangs down below the factory rocker height. The result is that the 4Runner's OEM ground clearance is fully retained. The clearance you had before installation is the clearance you have on the trail.
Anti-Slip Footing in Any Condition
The gripped top plates on the OE Plus Side Steps provide a stable, anti-slip surface when entering or exiting the 4Runner in wet, muddy, or otherwise slippery conditions. A step that becomes slick in the field is a step that gets avoided; the textured grip surface is designed to remain functional in the conditions where a 4Runner is most likely to be used.
Rocker Protection and a Clean, Bolt-On Install
Positioned along the rocker panel, the OE Plus Side Steps help shield that area from rocks, dirt, and trail debris kicked up by the tires or caught by low-hanging brush. Installation is fully bolt-on, with no cutting or welding required, and an estimated two-hour install time. The steps mount directly to the body and pinch weld for a solid, rattle-free fit.
Features
- Anti-slip gripped top plates: textured surface for stable footing in wet or muddy conditions
- High-clearance profile: retains OEM ground clearance; nothing hangs below the factory rocker line
- Rocker panel protection: shields against light debris, rocks, and trail brush
- Body/pinch weld mount: bolt-on installation, no cutting required
- Multi-gauge steel construction: 3mm, 4mm, and 5mm steel depending on section
- Micro-texture black powder coat: durable finish matched to the 4Runner's exterior
Specifications
| Specification | Detail |
|---|---|
| Material | Steel (3mm, 4mm, and 5mm sections) |
| Finish | Micro-Texture Black Powder Coat |
| Mounting | Body and pinch weld, bolt-on |
| Vehicle Fitment | 2010–2024 Toyota 4Runner, all trims except Limited |
| Estimated Install Time | 2 hours (no cutting required) |
| SKU | SRTF3-01 |
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Who This Is For and Isn't
The OE Plus Side Steps suit 2010–2024 Toyota 4Runner owners on all trims except Limited who want a step-up aid and rocker panel protection for daily use and trail driving without giving up factory ground clearance.
These steps are not compatible with the 4Runner Limited trim level. No fitment is stated for any other vehicle make or model.
Common Questions
Do these steps fit every 4Runner trim?
The DV8 Offroad OE Plus Side Steps fit all 2010–2024 Toyota 4Runner trims except the Limited. The Limited trim is explicitly excluded; buyers with a Limited-trim 4Runner should not order this part.
Will installing these steps reduce my 4Runner's ground clearance?
No. The OE Plus Side Steps use a high-clearance profile designed so nothing hangs below the factory rocker line. The 4Runner's OEM ground clearance is fully retained after installation.
What does installation involve, and how long does it take?
The OE Plus Side Steps are fully bolt-on. They mount to the body and pinch weld with no cutting or welding required. An estimated two-hour install time is given, though actual time will vary with experience level.
What steel thickness and finish do these steps use?
The OE Plus Side Steps are built from steel in 3mm, 4mm, and 5mm thicknesses depending on the section of the step. The finish is a micro-texture black powder coat, which provides corrosion resistance and a low-glare appearance.
Do the steps protect the rocker panels?
Yes. Positioned along the rocker panel, the OE Plus Side Steps help shield that area from rocks, dirt, and trail debris kicked up by the tires or caught by brush on the trail. Protection is described as coverage from light debris.
Share
