DV8 Offroad OE Plus Series Low-Profile Front Bumper for Ford Bronco

The DV8 Offroad OE Plus Series is a full-width, low-profile steel and aluminum front bumper for the 2021–2026 Ford Bronco (all trims except Raptor) that replaces the factory bumper while closely following its body lines. The center cutaway pattern mirrors the grille design of the Badlands, Wildtrak, and First Edition trims, and the recessed cavity behind it accepts a dual-row 20-inch LED light bar. Two pod-light mounts on each side of the bumper accommodate up to four 3-inch pods total. One SKU (FBBR-03) covers all six model years.

OEM Proportions Without OEM Limitations

The OE Plus Series was engineered to sit as close to the Bronco's body lines as the factory bumper, preserving approach angle and high-clearance geometry that a bulkier aftermarket bumper would sacrifice. For Bronco owners who want a meaningful upgrade without the visual bulk of a traditional off-road bumper, that tight fitment means the truck still looks factory-intentional on the street and still clears obstacles on the trail.

The 3-piece construction simplifies installation. The bumper goes on in approximately 1.5 hours and requires two people only for the lift into place, not for specialized tooling. The direct-fit design retains the factory mounting points, so no cutting or fabrication is required.

Lighting Ready from the Start

The recessed center section of the OE Plus Series Front Bumper houses mounts for a dual-row 20-inch LED light bar. The cutaway grille pattern lets light pass through while the surrounding steel structure shields the bar from brush and trail debris, a meaningful difference from a bumper that simply bolts a light bar to the outside. Four additional 3-inch pod-light mounts, two per side, let drivers add supplemental lighting for low-visibility trail conditions without aftermarket brackets or drilling.

Factory Sensors Stay Put

The OE Plus Series Front Bumper retains the factory parking sensors. Broncos not equipped with parking sensors receive sensor hole plugs in the box. The bumper does not interfere with the 360-degree camera system, and the front camera remains functional for lane detection. The bumper is partially visible in the camera frame but does not impede the system. Both factory plastic and metal skid plates are compatible with this bumper.

Features

• Dual-row 20-inch light bar mount: recessed behind the center cutaway pattern, protected by surrounding steel structure
• Four 3-inch pod-light mounts: two per side, integrated into the bumper ends
• Reinforced D-ring mounts: D-ring included; winch-compatible design is not included in this bumper
• 2-stage micro-texture black powder coat: applied over steel and aluminum construction; 4 mm body panels, 5 mm mounts and supports
• Factory sensor and camera compatibility: retains OEM parking sensors; does not impede 360-degree camera or front lane-detection camera
• Factory skid plate compatibility: fits both factory plastic and metal skid plates

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

The OE Plus Series Front Bumper suits 2021–2026 Ford Bronco owners (Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, and First Edition) who want a full-width steel and aluminum replacement bumper that preserves factory body lines, adds integrated lighting mounts, and retains OEM parking sensors and camera systems for daily and trail use.

This bumper does not fit the Ford Bronco Raptor. It is not winch-compatible. Factory fog lights do not fit in this bumper. Broncos equipped with Adaptive Cruise Control require the ACC Relocation Bracket, which is sold separately, for this bumper to fit. An optional steel skid plate for this bumper is also sold separately.

Common Questions

Does this bumper fit the Ford Bronco Raptor?

The DV8 Offroad OE Plus Series Front Bumper (FBBR-03) does not fit the Ford Bronco Raptor. It is a direct fit for the 2021–2026 Ford Bronco in Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, and First Edition trims only.

My Bronco has Adaptive Cruise Control. Can I still install this bumper?

Yes, but the ACC sensor module must be relocated before the OE Plus Series Front Bumper can be installed. An ACC Relocation Bracket is required and is sold separately; it is not included with this bumper. Broncos without ACC do not need any additional parts.

Will my factory parking sensors and 360-degree camera still work?

The OE Plus Series Front Bumper retains the factory parking sensors. Broncos not equipped with parking sensors receive sensor hole plugs in the box. The bumper does not interfere with the 360-degree camera system, and the front lane-detection camera remains functional. The bumper is partially visible in the camera frame but does not impede lane detection.

Can I mount a winch to this bumper?

No. The OE Plus Series Front Bumper is not winch-compatible. Its low-profile, slim design prioritizes approach angle and OEM body-line fitment over winch integration. D-ring recovery mounts are included.

What size light bar fits in the center mount, and how are the pod mounts configured?

The OE Plus Series Front Bumper accepts a dual-row 20-inch LED light bar in the recessed center mount. There are four 3-inch pod-light mounts total, two on each side of the bumper. The light bar and pod lights are not included and must be purchased separately.

Does this bumper work with the factory skid plate?

The OE Plus Series Front Bumper is compatible with both the factory plastic and factory metal skid plates. An optional steel skid plate designed specifically for this bumper is also available and sold separately.