DV8 Offroad Elite Series 3-Inch Amber Flush Mount LED Pod Light

The DV8 Offroad Elite Series 3-Inch Amber Flush Mount LED Pod Light is a universal auxiliary pod light designed to sit flush in recessed bumper and panel cutouts, delivering a 4,800-lumen flood beam through an amber polycarbonate lens that reduces dust reflection in dark or dusty off-road conditions. Each pod draws 40 watts through OSRAM P9 LEDs rated for 50,000 hours of use and carries an IP68 rating for full resistance to water and dust. Available in quantities from a single pod up to 16 pods per order.

Amber Lens for Dusty and Low-Visibility Conditions

The amber lens on each pod filters the flood beam in a way that reduces backscatter from airborne dust and moisture, a common problem with clear-lens lights on dirt roads and desert trails. Where a clear lens reflects dust particles back toward the driver, the amber tint cuts through that scatter and keeps the beam focused on the terrain ahead. The result is more usable light when conditions are worst, not just when the air is clean.

Flush Mount Profile That Stays Out of the Way

The bezel-less housing is sized to drop into a standard recessed cutout in a bumper or body panel, with an OD face plate of 4.8 inches by 3.5 inches by 2.75 inches. Sitting flush with the surrounding surface means the pod does not protrude into airflow, does not snag brush or debris, and does not interrupt the visual line of a built bumper. A rubber mounting pad is included to seal the fit and reduce vibration transfer to the housing.

Built to Stay On in Harsh Conditions

The aluminum housing dissipates heat through integrated fins, protecting the OSRAM P9 LEDs and extending service life toward the rated 50,000-hour ceiling. The IP68 rating means the pod is sealed against continuous water submersion and fine dust ingress, not just splash resistance. The shatterproof polycarbonate lens is UV-resistant and sheds frost and moisture buildup quickly, keeping the beam unobstructed in cold or wet weather. The weather-resistant plug with pig tail is included and mates to a wiring harness, which is sold separately.

Features

• Amber flood beam: 4,800-lumen output with flood light pattern and amber lens for reduced dust reflection
• OSRAM P9 LEDs: rated for 50,000 hours of use with an indirect reflector that minimizes glare and hotspots
• IP68 rating: sealed aluminum housing resists continuous water submersion and dust ingress
• Shatterproof polycarbonate lens: UV-resistant, frost-shedding, and impact-resistant
• Bezel-less housing with heat fins: flush-mount profile with integrated thermal management
• Weather-resistant plug with pig tail and rubber mounting pad: included with each pod

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

These pod lights suit overlanders and off-road drivers who want low-profile auxiliary flood lighting mounted flush in a bumper, skid plate, or body panel cutout, particularly in dusty, sandy, or wet conditions where an amber beam outperforms a clear lens. Buyers purchasing multiple pods for a full bumper build can select quantities up to 16 pods per order.

These pods produce a flood beam only and do not include a spot or driving beam pattern. A wiring harness is required for installation and is not included. The flush-mount design requires a recessed cutout sized to the 4.8" x 3.5" x 2.75" face plate; these pods are not surface-mount lights and will not attach directly to a flat panel without a suitable recess.

Common Questions

What does the amber lens do that a clear lens does not?

The amber lens on the DV8 Offroad Elite Series pod light reduces backscatter from dust, sand, and moisture particles in the air. Clear lenses reflect those particles back toward the driver, creating glare that reduces effective visibility. The amber tint filters the beam so that airborne particles scatter less light back toward the source, improving usable forward visibility in dusty or foggy off-road conditions.

What size cutout does the flush mount housing require?

The DV8 Offroad Elite Series pod light has an OD face plate measuring 4.8 inches by 3.5 inches by 2.75 inches deep. The mounting location must be a recessed cutout that accommodates these dimensions. The pod is not designed for surface mounting on a flat panel without a suitable recess, and a rubber mounting pad is included to seal the fit.

Is a wiring harness included with the pod lights?

A wiring harness is not included with the DV8 Offroad Elite Series pod lights. Each pod ships with a weather-resistant plug with pig tail and a rubber mounting pad. A compatible wiring harness must be purchased separately to complete the installation. Wiring is required before the lights will operate.

How many lumens does each individual pod produce?

Each DV8 Offroad Elite Series 3-inch amber pod light produces 4,800 lumens at 40 watts through OSRAM P9 LEDs. The beam pattern is a flood, spreading light broadly across the terrain rather than throwing a focused spot beam at distance. Buyers ordering multiple pods receive that lumen output per pod.

What does the IP68 rating mean for these lights?

The IP68 rating on the DV8 Offroad Elite Series pod light means the housing is sealed against continuous water submersion and complete dust ingress, the highest standard ratings in the IP scale for those two categories. In practical terms, the pod can be submerged in water and exposed to fine dust without water or particles reaching the internal components, making it suitable for water crossings and heavily dusty trail conditions.