DV8 Offroad Center Mount Front Bumper V2 for Toyota Tacoma

The DV8 Offroad Center Mount Front Bumper V2 is a 3mm and 5mm steel replacement front bumper built for 2016–2023 Toyota Tacoma, combining a hidden winch mount, two 1-inch D-ring recovery points, and an included bolt-on bull bar with a 20-inch light bar mount into a single front-end upgrade. Minor trimming of the factory fascia is required during installation, and the bumper is available in one finish: micro-texture black powder coat.

Built to Take the Hit

The Center Mount Front Bumper V2 is constructed from 3mm and 5mm steel plate, giving the front end of the 2016–2023 Tacoma a structural upgrade over the factory plastic fascia. That added mass translates directly to confidence on tight trails where brush, rocks, and debris make contact with the front of the truck. The bumper absorbs those impacts rather than passing them to the grille, radiator support, or factory bumper beam. The micro-texture black powder coat finish resists chipping and abrasion, keeping the bumper presentable after the kind of use that would scuff a painted surface.

Recovery-Ready Without the Bulk

The heavy-duty center-mount winch cradle accepts most industry-standard-sized winches, so a Tacoma owner can add self-recovery capability without sourcing a separate winch plate or modifying the bumper. Alongside the winch mount, two 1-inch thick D-ring mounts, sized for 3/4-inch shackles, provide dedicated attachment points for a recovery strap or snatch block on either side of the bumper. Having both a winch mount and two D-ring points on the same bumper means a stuck Tacoma has multiple recovery options available without swapping hardware in the field.

Lighting and Wire Management Included

The included bolt-on steel bull bar serves two purposes: it shields the grille from shrubs and debris, and it provides a dedicated mount for a single 20-inch LED light bar. The bull bar is optional. It bolts on and can be removed if a cleaner look is preferred. Welded-in zip tie tabs on the bull bar keep light wiring routed cleanly against the bar rather than hanging loose, which matters for long-term durability on rough roads. The bumper retains the factory fog light housings and does not interfere with adaptive cruise control or the front camera on equipped Tacomas, so driver-assist features remain functional after the swap.

Features

• Center-mount winch cradle: accepts most industry-standard-sized winches
• Two 1-inch D-ring mounts: sized for 3/4-inch shackles, one per side
• Included bolt-on bull bar: steel, removable, mounts one 20-inch light bar
• OEM fog light and ACC retention: factory fog lights and adaptive cruise control remain functional
• Welded-in zip tie tabs: integrated wire management on the bull bar
• 3mm and 5mm steel construction: micro-texture black powder coat finish

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

The DV8 Offroad Center Mount Front Bumper V2 suits 2016–2023 Toyota Tacoma owners who want to add a winch, dedicated recovery points, and supplemental lighting capability in a single front-end replacement. It works with all factory OEM skid plates except the TRD Pro skid plate, and it retains factory fog lights and adaptive cruise control on equipped trucks.

This bumper does not fit any Tacoma generation other than the 2016–2023 (3rd Gen) model. It is not compatible with the factory TRD Pro skid plate. The winch, light bar, D-rings, and shackles are not included: only the bumper and bull bar are in the box. Minor trimming of the factory fascia is required; this is not a no-cut installation.

Common Questions

Which Toyota Tacoma years does this bumper fit?

The DV8 Offroad Center Mount Front Bumper V2 fits 2016–2023 Toyota Tacoma (3rd Gen). It does not fit earlier or later Tacoma generations, and fitment has not been stated for any other Toyota model.

Is this bumper compatible with the TRD Pro skid plate?

No. The Center Mount Front Bumper V2 is not compatible with the factory TRD Pro skid plate. It is compatible with all other OEM Toyota Tacoma skid plates. TRD Pro owners will need a different front skid plate to pair with this bumper.

Does a winch come included with the bumper?

No winch is included. The Center Mount Front Bumper V2 includes a heavy-duty winch cradle that accepts most industry-standard-sized winches, but the winch itself must be purchased separately. D-rings and shackles are also not included.

Does installation require cutting or drilling?

Yes. Installing the Center Mount Front Bumper V2 requires minor trimming of the factory fascia. The estimated installation time is 4 hours, though actual time will vary depending on experience and tools available.

Will this bumper work with adaptive cruise control and the factory fog lights?

Yes. The Center Mount Front Bumper V2 retains the factory fog light housings and does not interfere with adaptive cruise control on equipped 2016–2023 Tacomas. The front camera is also not obstructed by the bumper.

Is the bull bar required, or can the bumper be run without it?

The bull bar is optional. It is included with the Center Mount Front Bumper V2 and bolts on to protect the grille and mount a 20-inch light bar, but it can be left off if a cleaner front-end appearance is preferred. The bumper functions as a complete unit without the bull bar installed.