DV8 Offroad Armor Fender Flares for Jeep Wrangler JL 2018-2026

The DV8 Offroad Armor Fender Flares are a full set of bolt-on steel fender flares built for 2018–2026 Jeep Wrangler JL (all trims), replacing the factory flares with a trim-profile, armor-plated design that protects body panels from rocks, brush, and trail debris. Constructed from 2.5mm and 3mm steel with a micro-texture black powder coat finish, the flares include plug-and-play amber LED turn signals, paintable mesh aluminum accent panels, rubber debris seals, and bolt-on fender vent logo plates.

Armor-Grade Steel Where the Trail Hits Hardest

The Armor Fender Flares are built from 2.5mm and 3mm steel. Rocks, branches, and brush that would crack or deform a lighter flare deflect off the steel body instead. The micro-texture black powder coat finish resists chips and corrosion from the same trail abuse the steel underneath is designed to take. For a Wrangler that sees regular off-road use, that combination means the flares hold up without constant touch-up or replacement.

Trim Profile for Tight Trails, Rubber Seals for Clean Body Panels

The trim fitment keeps overall width narrow compared to wide-flare alternatives, which matters when threading between trees or rock walls on tight single-track. The narrower stance does not sacrifice coverage: rubber seals run along the flare-to-body interface to block pebbles, dust, and mud from packing into the gap between the flare and the Jeep's body panels, where they would otherwise cause paint wear and corrosion over time.

Plug-and-Play Turn Signals and Paintable Accent Panels

Each front fender includes one LED button-style amber turn signal that connects directly to the factory plug, with no splicing, relay wiring, or additional harness required. The perforated aluminum accent panels are removable and paintable, so they can be color-matched to the Jeep's body or finished in a contrasting accent color. Bolt-on paintable fender vent logo plates are also included for additional detail on the finished install.

Features

• Armor-plated trim design: rigid 2.5mm and 3mm steel construction with a narrow profile for tight-trail clearance
• Plug-and-play amber turn signals: two LED button-style signals connect to the factory plug on the front fenders
• Paintable mesh aluminum accent panels: perforated, removable panels that can be color-matched or accent-finished
• Rubber debris seals: seal the flare-to-body gap against pebbles, dust, and mud
• Bolt-on nutsert mounting: hardware mounts without welding; estimated 3.5-hour install
• Micro-texture black powder coat: chip- and corrosion-resistant finish over the full steel flare body

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

These fender flares are built for 2018–2026 Jeep Wrangler JL owners who run tight off-road trails and want steel-bodied protection over factory or plastic flares, with factory-compatible turn signal wiring and a trim profile that does not add significant width. The paintable aluminum accent panels suit builders who want a color-matched or two-tone exterior finish.

These flares do not fit the Jeep Wrangler JK, Gladiator JT, or any non-JL vehicle. Installation requires trimming the front fender mount, so these are not a zero-modification bolt-on. The rear fenders do not include turn signals; signals are included for the front fenders only.

Common Questions

What vehicles do these fender flares fit?

The DV8 Offroad Armor Fender Flares (FDJL-09) fit 2018–2026 Jeep Wrangler JL in all trim levels. They are not compatible with the JK-generation Wrangler, the Gladiator JT, or any other vehicle platform.

Do the turn signals require any wiring or splicing?

The two included LED amber turn signals connect directly to the Jeep's factory plug on each front fender, with no splicing, relay, or additional wiring harness required. The rear fenders do not include turn signals.

Is any cutting or drilling required to install these flares?

The Armor Fender Flares mount bolt-on using nutserts and do not require welding, but trimming on the front fender mount is required before the front flares can be installed. DV8 Offroad provides an installation guide (FDJL-09 Installation Guide) and estimates the full install at approximately 3.5 hours, though time will vary by experience level.

Can the aluminum accent panels be painted or removed?

The perforated aluminum accent panels on the DV8 Offroad Armor Fender Flares are removable and paintable. They can be color-matched to the Jeep's body or finished in a contrasting accent color before reinstalling, and the bolt-on fender vent logo plates are also paintable.