DV8 Offroad 4-Door Soft Top Roof Rack for Ford Bronco
DV8 Offroad 4-Door Soft Top Roof Rack for Ford Bronco
Couldn't load pickup availability
The DV8 Offroad 4-Door Soft Top Roof Rack is a bolt-on steel cargo platform built for the 2021–2024 Ford Bronco 4-Door with a factory soft top. Arced crossbars increase usable cargo volume above the roofline, and the rack carries up to 200 lb of gear distributed dynamically across its surface. Tie-down and accessory mounting points run along all four sides, and the rear mounts are boxed for additional structural support and secondary accessory attachment.
Arced Crossbars and a 200 lb Dynamic Load Rating
Conventional flat crossbars sit low against the roofline and limit how much gear can be stacked without fouling the soft top. The DV8 Offroad rack uses crossbars with an arced profile that lifts cargo clear of the top surface, allowing taller or bulkier loads to be carried without contact. The 200 lb dynamic load rating means the rack is rated for that capacity while the vehicle is in motion, not just at rest, giving a realistic figure to plan against when loading recovery gear, camping equipment, or a rooftop cargo bag.
Mounting Points on All Four Sides
Tie-down locations run along the front, rear, and both sides of the rack, so cargo can be secured from multiple angles regardless of load shape. Dedicated mounting locations for lighting, shovels, hi-lift jacks, and traction boards are distributed across the rack surface, and the rack is designed to accept DV8 Offroad's 40-inch curved light bar mount and 50-inch light bar mount (each sold separately) using the factory accessory locations already on the Bronco.
Bolt-On Installation Using Factory Hardware
The rack installs with a fully bolt-on design that uses the Bronco's existing factory hardware locations. No drilling into the body or roof is required. All necessary mounting hardware is included. DV8 Offroad estimates installation at approximately three hours, though actual time will vary with experience and tools on hand. The heavy-duty boxed rear mounts anchor the rack at the back of the roof and provide the additional rigidity that supports the full load rating.
Features
- Arced crossbar design: lifts cargo clear of the soft top surface to increase usable load volume
- 200 lb dynamic load rating: rated capacity while the vehicle is moving, evenly distributed
- Tie-down points on all four sides: multiple locations front, rear, and both sides for flexible cargo securing
- Accessory mounting locations: dedicated points for lights, shovels, hi-lift jacks, and traction boards
- Boxed rear mounts: heavy-duty construction for structural support and additional accessory attachment
- Fully bolt-on with factory hardware: all necessary hardware included, no drilling required
Specifications
| Specification | Detail |
|---|---|
| Fitment | 2021–2024 Ford Bronco, 4-Door, Factory Soft Top, All Trims (excludes Raptor and Everglades) |
| Material | 2 mm / 3.5 mm steel plate; 1.2 mm steel tube |
| Finish | Micro-Texture Black Powder Coat |
| Weight | ~31 lb |
| Load Rating | 200 lb dynamic, evenly distributed |
| Mounting | Fully bolt-on; utilizes factory hardware locations; all hardware included |
| Estimated Install Time | ~3 hours |
| SKU | RRBR-01 |
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Who This Is For and Isn't
This rack suits 2021–2024 Ford Bronco 4-Door owners running the factory soft top who want a bolt-on platform for overlanding gear, lighting, recovery equipment, or trail-access storage such as traction boards and hi-lift jacks.
This rack does not fit the 2-Door Bronco, the Bronco Raptor, or the Bronco Everglades. It is not compatible with hard tops or aftermarket soft tops; fitment requires the OEM factory soft top. DV8 Offroad 40-inch and 50-inch light bar mounts are sold separately and are not included.
Common Questions
Does this rack require drilling into the Bronco's roof or body?
The DV8 Offroad 4-Door Soft Top Roof Rack is fully bolt-on and uses the Bronco's existing factory hardware locations. No drilling into the roof or body panels is required, and all necessary mounting hardware is included in the box.
What is the load capacity, and does it apply while driving?
The rack is rated for 200 lb dynamically. That capacity applies while the vehicle is in motion, not just when parked. The load must be evenly distributed across the rack surface to stay within the rating.
Will this rack fit a Bronco with an aftermarket or upgraded soft top?
The DV8 Offroad rack is designed specifically for the factory OEM soft top on the 2021–2024 Ford Bronco 4-Door. Compatibility with aftermarket soft tops is not stated in the product specifications, so fitment with a non-factory top cannot be confirmed.
Are the DV8 Offroad light bar mounts included with this rack?
Light bar mounts are not included. The rack is designed to integrate with DV8 Offroad's 40-inch curved light bar mount and 50-inch light bar mount, both of which are sold separately. The rack uses the Bronco's factory accessory locations to accept those mounts.
How long does installation take?
DV8 Offroad estimates approximately three hours for installation. Actual time will vary depending on the installer's experience and available tools. An installation guide is available from DV8 Offroad for reference.
Share
