DV8 Offroad 2025+ Toyota 4Runner Ditch Light Brackets

The DV8 Offroad Ditch Light Brackets (LBTF3-01) are a bolt-on pair of 5mm steel mounts designed for the 2025+ Toyota 4Runner (all trims), placing up to two 3-inch light pods per side (four pods total) in the ditch position for wide trail coverage. Lights are sold separately. One SKU covers both driver and passenger sides.

Four Pods, One Pair of Brackets

Each DV8 Offroad ditch light bracket carries two mounting points, so a single pair of brackets can support up to four 3-inch pods across the front of the 4Runner. That dual-point layout also means the second position on either bracket can hold an antenna, whip light, or flag instead of a second pod. This suits builds that already run a specific light count or need an antenna relocated off the hood. The flexibility to mix light and accessory mounts on the same bracket reduces the number of separate mounting solutions needed on the A-pillar area.

Slotted Adjustment for Precise Beam Placement

The DV8 Offroad brackets use slotted mounting points rather than fixed holes, so pod angle and position can be dialed in after the brackets are on the truck. Ditch lights are most effective when aimed to fill the gap between the headlight pattern and the far edges of the trail; slotted adjustment lets the driver set that angle precisely without being locked into a single factory position. The low-profile bracket geometry keeps the pods close to the cowl line, avoiding the visual bulk of taller aftermarket mounts.

Bolt-On Installation, No Cutting Required

The DV8 Offroad ditch light brackets install with existing mounting points on the 2025+ 4Runner: no drilling, no cutting, no permanent modification to the vehicle. DV8 estimates the install at approximately one hour, though actual time will vary with experience and the specific lights being mounted. A reversible install matters for buyers who may change trim levels, sell the truck, or want to return to stock without visible evidence of the modification.

Features

• Sold as a pair: includes driver and passenger side brackets
• Dual mounting points per bracket: mounts up to two 3-inch light pods each, or one pod plus an antenna, whip light, or similar accessory
• Slotted adjustment: allows fine-tuning of pod angle and position after installation
• 5mm steel construction: micro-texture black powder coat finish
• Bolt-on installation: no cutting or drilling required; estimated 1-hour install
• Low-profile design: follows the 4Runner's cowl lines without adding significant visual bulk

Specifications

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

These brackets suit 2025+ Toyota 4Runner owners (all trims) who want to add ditch-position pod lighting or antenna mounts without cutting or drilling the vehicle. Builders running up to four 3-inch pods, or a mix of lights and accessories, across the A-pillar area will get the most from the dual-point layout. Pod lights are sold separately.

These brackets are not compatible with factory snorkels. They are designed specifically for the 2025+ Toyota 4Runner and do not fit earlier 4Runner generations or other vehicles. Lights are not included.

Common Questions

Do the ditch light brackets come with lights?

The DV8 Offroad ditch light brackets are sold as a hardware pair only; pod lights are purchased separately. Confirmed compatible pods include the DV8 Elite 3", Rigid Dually, Rigid Radiance, and Baja Designs Squadron (non-pro). Other 3-inch pods may also fit given the slotted adjustment range.

Will these brackets work if my 4Runner has a factory snorkel?

No. The DV8 Offroad ditch light brackets for the 2025+ Toyota 4Runner are not compatible with the factory snorkel. Buyers running a factory snorkel should confirm fitment before purchasing.

What size light pods do these brackets accept?

The DV8 Offroad ditch light brackets are designed for 3-inch pod lights. Each bracket has two mounting points, and the slotted design accommodates a range of 3-inch pods beyond the confirmed list. The second mounting point on each bracket can also hold an antenna, whip light, or similar accessory instead of a second pod.

How long does installation take?

DV8 Offroad estimates approximately one hour for a bolt-on installation of these 4Runner ditch light brackets. No cutting or drilling is required. Actual time will vary depending on installer experience and the specific lights being mounted alongside the brackets.

Which 4Runner model years and trims do these brackets fit?

The DV8 Offroad ditch light brackets (LBTF3-01) fit the 2025 and newer Toyota 4Runner across all trims. They are not confirmed for earlier 4Runner generations. Buyers with a 2024 or older 4Runner should not assume fitment.